RFID Knowledge
(b) View the latest RFID knowledge content and learn about relevant technological advances, industry trends and application practices.
RFID Knowledge
1875 articles- RFID Knowledge
What are the standards for the management of spare parts storage? Environment and security
The standards usually cover both environmental control, fire and electrical safety, hazardous materials segregation, access to the warehouse operations and routine inspections, and determine specific parameters for spare parts material, storage requirements and storage risk. The temperature and humidity values should be based on material description, applicable specifications and field conditions, and it is not appropriate to apply the same standard to all warehouses.
- RFID Knowledge
What are the criteria for the management of spare parts? classification, coding and acceptance requirements
The standards for the management of spare parts for spare parts should be clear “what to control, how to identify, receive and accept, and by whom”. A unique code could be created by materiality and use, and would include a statement of arrival check, quality check, inventory record as an enforceable acceptance requirement; they would also cover changes, decommissioning and periodic review.
- RFID Knowledge
What about the spare parts management software for equipment provisions?
Many people believe that spare parts management software is a way of moving inventory to a computer. The practical use is to link demand, approval, procurement, warehousing, access, maintenance and inventory into a trackable business process, allowing for the recording of each spare parts flow and timely feedback on changes in inventories to the relevant positions.
- RFID Knowledge
How can the management of spare parts for warehouse supplies be optimized?
The most problematic aspects of spare parts management are not "shortfalls" but "searching for goods." It takes an average of 12-15 minutes to find a spare part before the three things that are used for equipment maintenance, storage, movement and security, are properly handled. Optimizing both storage and operational dimensions, with a time limit of 1-2 minutes for finding goods and cutting down half the time at which the inventory is done.
- RFID Knowledge
What about the management of spare parts for sale? Responsive speed and inventory strategy.
The key to spare parts management is not “more” or “as little as possible”, but a layer of failure, replenishment cycle and demand fluctuations. Key items that are suitable for safe storage are high downages and long procurement cycles; common and easily replenished materials can reduce stocks and supplement them as needed.
- RFID Knowledge
How is the vehicle spare parts management implemented?
The management of spare parts for vehicle spare parts is subject to a set of common rules: requirements are accurately identified after sale, storage is carried out on an inventory and delivery basis, and the results are checked against the same material code, stock status and needs priority.
- RFID Knowledge
What are the elements of the equipment spare parts management approach? Responsibilities and operations
The equipment spare parts management approach, with the core being “who is responsible, who controls what, when, how and how to take stock”.
- RFID Knowledge
How does the equipment spare parts management system work?
The key to selecting a spare parts management system for equipment is not the number of modules as good as possible, but whether inventory, procurement, access, maintenance and finance can be aligned around the same set of material and equipment data.
- RFID Knowledge
How do we plan to manage spare parts storage? Layout and process design
The core of the spare parts warehouse management programming is to treat "show" and "process" as a two-way design task — an unreasonable layout, and a poorly run process; and the unconnected, more and more messy, if the process is not closed. The main thing to judge is whether it works, and whether it answers three things: where it is, who controls it, how it goes.
- RFID Knowledge
What are the operational requirements of the rules governing spare parts for equipment?
When equipment is shut down, the warehouse does not find suitable models for maintenance staff, which are often not a matter of stock size but rather of key elements in management rules. The rules governing spare parts for spare parts should cover the breakdown of accounts, demand plans, procurement acceptance and inspection, storage custody, requisitioning maintenance, inventory disposal and accountability records, and clear approvals, vouchers and time frames for each step.
- RFID Knowledge
What modules are included in the equipment spare parts management system?
Last winter, an embarrassing event happened at a factory that did a finely retrofitting: two o'clock in the morning, when an imported production line suddenly failed, the maintenance worker arrived and found it, the core parts had been worn out, and needed to be replaced. The result was to go through five warehouses, and find only three of them, one size not yet.
- RFID Knowledge
What are the elements of the spare parts management code for the spare parts?
The standard for the management of spare parts for spare parts typically includes classification codes, demand plans, procurement acceptance and inspection, warehousing custody, access issuance, inventory count, quality retrospectives and end-of-life disposal. The operational standards require that the person responsible for each link, the content of the records and the trigger conditions be cleared to reduce the backlog of missing stopovers and stock.
- RFID Knowledge
What are the specifications for the management of spare parts for model items?
Many factories interpret spare parts management as “numbering, loading and loading shelves”, but this only addresses some of the identification problems. The complete specifications also specify coding rules, labelling information, account links, access and storage records, installation and end-of-life disposals, so that each spare part can be traced to its status and responsibility from the point of entry to the point of exit.
- RFID Knowledge
How is the project spare parts management programme prepared? Project delivery packages
The project spare parts management programme is not "over-purchased" simple, with the core being to set the list by type of equipment, frequency of failure, supply cycle and hand over simultaneously at delivery.
- RFID Knowledge
How is the plant spare parts management system developed? Production scenes fit?
The key to developing a plant spare parts management system is not to keep stock as low as possible, nor to have all spare parts available in one copy, but rather to separate management according to the impact of the shutdown, procurement cycle and replacement difficulty. Classification and approval rules can be established before continuous correction is made with access, inventory and replenishment records; equipment-critical, long-term spare parts should be managed in a different manner than generic items.
- RFID Knowledge
Where is the equipment spare parts management process? Key node resolution
Early one morning last winter, the spindle motor at an auto parts factory burned out. The warehouse had no replacement of the same model, and getting one would take at least five days. The line was down for four and a half days. Lost production plus the premium for an emergency order added nearly 200,000 yuan. Spare-parts management is not as simple as it looks.
- RFID Knowledge
How is the spare parts inventory management system implemented?
Many people think that the spare parts inventory management system is on line, with emphasis on bringing in existing inventories. The actual implementation involves the harmonization of material, storage and operational rules, reconfiguring systems, reconciliation of data, piloting and gradual switching. The system records inventory change processes, lack of information and operating procedures, and data import may not be feasible.
- RFID Knowledge
What are the elements of the spare parts access management system?
Many people believe that the system for the receipt of spare parts for spare parts is “filling, signing and taking”, but management priorities also include access grounds, approval authority, inventory records and refund disposal. The system should allow each spare part to be traced back to equipment, use, responsibility and final destination; it should allow for control requirements to be cleared and re-checked with old items, without either of them being necessary.
- RFID Knowledge
What are the elements of the spare parts management system? Job responsibilities and processes
The Department of Spare Parts and Components Management system typically includes organizational and job-related duties, parts classification and coding, needs plans, procurement acceptances, warehousing, access issuance, inventory and write-off, account records and unusual processing.
- RFID Knowledge
How is the spare parts management system developed for recovery?
The core of the spare parts management system, which is to be repaired, is to clarify “which equipment requires spare parts, how much they are prepared, where they are placed, who can access them and when they will be returned.” The system should cover needs assessment, classification quotas, storage maintenance, emergency response, backup and segregation of duties, and clear key timelines, approval authority and log sheets to quickly identify available spare parts in case of failure.

Ms. Lei
Mr. Pang