What are the specifications for the management of spare parts for model items?
Many factories interpret spare parts management as “numbering, loading and loading shelves”, but this only addresses some of the identification problems. The complete specifications also specify coding rules, labelling information, account links, access and storage records, installation and end-of-life disposals, so that each spare part can be traced to its status and responsibility from the point of entry to the point of exit.
First, you have to make clear what the markings are about to solve.
The role of the spare parts marking is to enable warehouse personnel, equipment maintenance staff and procurement staff to judge exactly what this is, where it can be used, and what it is in its state. The code should be as stable as possible, avoiding writing in material numbers with changing information such as the position of the shelf, the source of supply. An update of the repository location is sufficient when the location changes, without re-encodementing.
An enforceable set of markings usually includes material code, name, specification type, application of equipment or parts, unit of measure and state. Close to the outside, parts with different specifications or easier to mix, key dimensions, materials or version information should be included in the description or inspection record, and easily distinguishable fields should be highlighted on the label.
Use a uniform code to match the physical with the desk account.
Coding rules are to be easily added, search and verify. The common practice is to assign a unique internal material code for each spare part, with manufacturer's model, graph numbers, etc. as an ancillary property record. Encoding length, character range, classification level and double-checking should form written rules; disabled codes should keep historical records and not be reallocated to another material.
At minimum, a tag should identify the material code and name. Record batch, serial number, shelf life, or inspection information where applicable. Barcodes and QR codes reduce manual entry, but the tag is only the starting point. A scan must link to accurate register data. When documenting spare-parts requirements, Shanghai Zejie Technology Co., Ltd. checks each physical tag field against system fields so readable tags do not lead to records missing essential traceability information.
Let the tracking cover, store, send, use, withdraw.
Tracking records should pass through the flow of spare parts, not just the amount of inventory. The contents are checked in the vault for code, specification, quantity, batch or serial number and record receipt and inspection status; the place of registration on board; the user, use, associated equipment or maintenance worksheets at the time of application; the condition is checked and distinguished from service, pending review, during maintenance and scrap.
For example, if the bearings on a plant replace the equipment, the record should not only be "axle-take out one library" but also associated bearings code, date of use, installation of the equipment and specific parts. If the spare parts are returned after replacement, the amount returned and the results of the inspection should be recorded; if old pieces are removed, they must be separately recorded and cannot be mixed with available stocks.
Maintaining the credibility of records by inventory and change
The discrepancy is often associated with temporary unregistered access, unregistered bank, delabelling or material information change. The regulatory code should specify the frequency of inventory count, the processor of discrepancies and adjustment of approval requirements; key spare parts can increase the frequency of verification. When a label is found to be damaged, the physical properties and billboards should be checked and then the tags should be re-referenced, and the identification of the material cannot be assumed solely on the basis of the shelf location.
Specifications, equipment applicable, verification requirements or storage conditions change, information before and after the change is maintained, date of change and audit records. Implementation can be done by extracting a key type of spare parts, checking if the labels are clear, coding is duplicated, system records can be traced to the access and installation, then field and operational steps revised. The identification is responsible for identifying the physical, tracking the return flow, both in conjunction with inventory, changes in the record, and the management of the spare parts for the ready items on a verifiable basis.

Ms. Lei
Mr. Pang