What are the elements of the spare parts management code for the spare parts?
The standard for the management of spare parts for spare parts typically includes classification codes, demand plans, procurement acceptance and inspection, warehousing custody, access issuance, inventory count, quality retrospectives and end-of-life disposal. The operational standards require that the person responsible for each link, the content of the records and the trigger conditions be cleared to reduce the backlog of missing stopovers and stock.
What core elements should be included in the spare parts management code for the spare parts?
Management scope and classification:The classification should serve actual decision-making, for example, the impact of critical spare parts on equipment being shut down, different control requirements for procurement cycles and alternative possibilities.
Encoding and Basic Information:The name and model shall be consistent with the drawing, equipment list and procurement information, avoiding any mixing of different names or similar models.
Stock control rules:Sets minimum stocks, maximum stock or filling points, and indicates who will review the parameters and when to review them. The recharge points can be measured in terms of average daily consumption, procurement lead times and safety stock; if demand fluctuates more, they should also refer to the downside risk and supply cycle, which cannot be determined only by historical average usage.
What are the operational standards for spare parts from request to storage?
The request should indicate the spare parts code, quantity, use, corresponding equipment, date of requirement and inventory verification results. The planr should review existing stocks, decide on redeployments after the route and maintenance plans are completed, or requests for procurement are deferred; emergency purchases should be completed for reasons of approval and subsequent entry into the warehouse records.
The arrival inspection is performed in the order of "checking documents - verifying the specification quantity - checking the appearance and quality certificate - registering batches or serial numbers". For critical items or materials for which special testing requirements exist, it should clearly identify the project, the method of qualifying determination and the method of segregating the non-conformity.
What are the operational requirements for the receipt, custody and inventory of spare parts?
The request shall be related to the maintenance worksheet, equipment number or use, approved and registered by the authorized person, the recipient and the time. Refund spare parts shall be reusable, with a status indication, and stored separately; old pieces removed should be marked and isolated from available stocks if the cause of the failure is analysed.
The standard of safekeeping shall be defined by the characteristics of spare parts, which shall provide for the protection against tide, dust, rust, temperature and humidity control and packaging requirements, and shall specify the identification of the storage area, first-in-first or batch management rules. The inventory may be carried out in a regular, comprehensive inventory with the critical material cycle; if differences are detected, the amount of discrepancies shall be recorded, for reasons such as reviewers and adjustment approvals, and no direct change should be made.
Shanghai Select Technologies, when combing such processes, writes "who handles, what keeps, how unusually handled" into the same business requirements, avoiding a system that is only principled and cannot be implemented on site. Enterprises can start to refine standards from high value, long lead times and downtime for spare parts with significant impact.
How should inventory parameters and management effects be reviewed?
It is recommended that at least periodic inspections of inactive stocks, missing items records, frequency of emergency purchases, discrepancies in accounts and coverage of critical spare parts be undertaken. If a material is not used for long periods, the equipment should be checked for continued service, replacements available and overstocked; if there are frequent shortages, demand projections, procurement lead times and postpoint settings should be checked. The specific review cycle should combine equipment risk with determination of material value and consumption frequency, and the basis for adjustment should be maintained.
When you land, you can first create a list and code of spare parts, then clarify the procurement, acceptance, custody, access, inventory and end-of-life liability, and finally use missing items and backlogs to check whether or not the parameters are appropriate. The norm is not the number of tables, but the fact that each requirement corresponds to the responsible person, the operational steps and the traceability.

Ms. Lei
Mr. Pang