What are the elements of the spare parts procurement management approach? processes and standards
The core of the procurement management approach for spare parts is to write requirements, approvals, procurement, acceptances, warehousing, access and retroactivity rules as retroactive rules. The system should clarify job responsibilities, procurement standards, clearance authority, inventory control and unusual handling, with supporting form records to avoid urgent cases without evidence, backlogs or discrepancies in arrival.
Point 1: Clarify the scope of application and job responsibilities
The following are the functions of the management, including equipment maintenance spare parts, consumables and key security items, and the applicable departments, warehouses and procurement.
Element 2: Specification of requirements and conditions for approval
- The application information should include, at a minimum, the name of the spare parts, the drawing or model, the applicable equipment, the quantity required, the amount of inventory, the date of need, the purpose used and the applicant.
- The plan requirements should be presented in conjunction with the maintenance plan and inventory situation; emergency procurement would require a description of the impact of the failure, the reasons for the shortfall and the anticipated downtime risk, and the completion of ex post facto approvals and acceptance records.
- The threshold is set by the enterprise’s budgetary system, so as to avoid setting figures that do not correspond to the actual authority.
Point 3: Establish rules for the classification of procurement and value for money
The spare parts can be classified according to criticality, procurement cycle, price fluctuations and stoppage effects. Specialized items for critical equipment should check the original equipment parameters, interface sizes, materials and quality documents; generics can be compared to specifications and performance requirements. The procurement records should maintain a basis for request for quotations, comparison of offers, selection reasons, contracts or orders, delivery terms and conditions of quality assurance. The number of pricers and exceptions should be clear in the internal system; if technical compatibility is not possible, the submission period or market supply restrictions should be recorded and additional approvals should be fulfilled. When Shanghai-Shanghai-Technology Ltd. is combing out such regulatory requirements, it designs “technical recognition” and “commercial approval” separately to facilitate follow-up of the specification determinations and procurement decisions.
Element 4: Check items that require acceptance, entry and receipt
- Check orders, probate names, models, quantities, appearance and accompanying documents on arrival; if there are dimensions, materials or performance requirements, check or transport under the technical conditions of the procurement. If a shortage, damage or lack of conformity is detected, mark-up should be separated and the disposal results recorded, and no eligible repository should be directly processed.
- The receipt shall be related to the equipment or maintenance worksheet, recording the recipient, number and date; the return, transfer and end-of-life documents shall also be maintained.
- The duration and conditions of the records for spare parts with warranty or long-term storage requirements are arranged on an ex-ante basis; regular inspection records for critical spare parts may be added.
Element 5: Set inventory standards and repeat them regularly
Each spare part can be equipped with a minimum stock, a maximum stock and replenishment trigger point. The recharge point can be measured on the basis of daily consumption, procurement lead time and safety inventory, and the formula can be written as follows: Replenishment point = projected usage over the period ahead + safe stock. Initial parameters should be reviewed on a monthly or quarterly basis, taking into account historical access, equipment maintenance plan and supply cycle; low consumption, material corresponding to high value or decommissioned equipment should be assessed separately to avoid mechanical replenishment.

Ms. Lei
Mr. Pang