What are the functions of the spare parts storage management system?
The key to a spare parts storage management system is not the more functional it is, but whether it links the warehouse, batch, stock and access records. If material types are large and storage locations change frequently, the focus should be on how well the store space is managed and batch traced; if the product class is small and the process simple, then the basic inventory function can be assessed for adequacy.
Cost comparison: do you only manage the number or manage the library and batch at the same time
Basic inventory management usually records material coding, names, quantities and access documents; additional warehouse management is followed by maintenance of information on the location of warehouses, shelves, layers, etc.; additional batch management requires recording lot numbers, date of entry into the library, source or period of supply. The more detailed the functionality, initial data-processing, bar code identification, and input to staff training and daily maintenance. Evaluation should combine the cost of implementing the system with inventory, finding materials, miscalculating the costs of day-to-day operations.
Effect comparison: stock by material or storage and batch location
The system records the change of inventory by lot and can be selected on an advance basis, with validity or with batch rules. When Shanghai Hyeok Tech handles such needs, it encodes the bank, cross-checks the batch fields with actual steps of operation to avoid a disconnection between the system's recording mode and the on-site operations.
Applicable scene comparison: simple warehouse, multi-type, multi-volume inventory
If the warehouse has fewer materials, is fixed, access records are simple, and the amount of the item coded may be sufficient. If the same material is distributed in multiple areas or cannot be used in different batches, a system that supports "materials-storage-section" combinations needs to be selected. For example, an axle bearing of the same type in the maintenance warehouse should be available in batches, so that the operator can locate the quantity and location of the batch and receive it according to management rules; when it comes to validity or quality status, it should also be able to distinguish between stock status for review, eligibility, freezing etc.
Common pits: functional and non-matched on site
Common problems include the fact that the coding of the library is not uniform, that batch fields are filled only when entering the library, that the system position after moving to the library is not updated and that there is no clear process for accounting discrepancies. A typical process can be followed by "the receipt batch - the top-place distribution library - using a rule-selected-discretion library to update -- check the inventory differences " , and confirm who works at each step, what information needs to be recorded. The selection gives priority to verifying whether the actual process runs in full, comparing the report with the extension; the repository is clear and system data is more useful.

Ms. Lei
Mr. Pang