RFID Knowledge
(b) View the latest RFID knowledge content and learn about relevant technological advances, industry trends and application practices.
RFID Knowledge
1875 articles- RFID Knowledge
The resolution of the application of electronic tape tags in equipment and cable seal management
The core value of electronic plaster labels is to combine "physical seal" and "data identification".
- RFID Knowledge
Identification principles for passive electronic labels and depth resolution of energy acquisition
First, there's a question: "No energy" is not "no energy." For the first time, many people hear "no power tag," and they can instinctively think that there's no energy in the label.
- RFID Knowledge
How to select an electronic label: a method for matching the frequency band, capacity and application in the form of a containment
The selection of electronic labels, whether to set a frequency segment or set a scene? The selection logic for electronic tags (RFID Tag) is actually straightforward: the scenario sets a frequency band, the frequency band sets a distance, and the bound envelope. That means that you have to figure out where the labels are going to be read, how far they are from, what material the object is to be stamped on, then push the chip and the cover.
- RFID Knowledge
How much for a rfid tag: Quote quote by frequency segment and process
The price of RFID labels varies from a few cents to several dozen dollars, and the difference is mainly from frequency bands, chips, sealing processes and purchases. Ordinary UHF (ultra-high frequency) non-dry tape tag batch procurement can be around 0.5 yuan, anti-metals, special envelopes or small batch customizations may go up to a dozen or even tens of dollars.
- RFID Knowledge
uwb electronic tags for indoor high-precision positioning and application resolution
Why adding base stations isn't enough for indoor positioning. Many people assume indoor positioning just means installing more base stations. That's misleading. Wi-Fi and Bluetooth estimate distance using signal strength, and metal shelves, passing people, and reflections off walls can push errors to 3–5 m. That's nowhere near accurate enough for finding tooling in a factory or equipment in a hospital.
- RFID Knowledge
rfid Electronic label-form comparison: non-dry glue, ceramics, anti-metal and active option selection
When choosing RFID labels, face non-dry glue, ceramics, antimetals, four source forms, many people are stuck in the first model -- from a few centimetres to hundreds of dollars, reading distance from a few centimeters to a hundred metres, misreading the surface without reading data is common. The core test is only three: what's the adhesive, how far to read distance, and at which level is the budget and volume.
- RFID Knowledge
Paths to application of rfid technology in industrial networking and analysis of landing points
The central issue to be addressed by RFID in the industrial goods network is whether each material, every device, and every piece of work is equipped with an automatically identifiable "digital identity". The key to landing or failure is not how far technology goes, but whether the selection matches the scene, whether the deployment location is reasonable, and whether data can reach the upper-level system.
- RFID Knowledge
rfid technology panoramic resolution: from radio frequency principle to full-band label and reading/writing device selection
RFID (radio frequency recognition) reads and writes data from electronic labels in the form of a non-contacted electromagnetic wave, consisting of three parts: labels, readers and antennas. Readers generate radio frequency signals to power labels and trigger their return data.
- RFID Knowledge
What determines the price of rfid electronic labels: the analysis of chips, envelopes and volume factors
The RFID label is quoted at core cost of three blocks of the chip selection, the form of the sealing and the order volume. Additional items such as antenna design, frequency, use environment, surface process, will also allow prices to float upwards and downwards.
- RFID Knowledge
2.4g Sourcerfid label real-time positioning capability compared to network resolution
Many people mix "able" and "real-time positioning" into "indicated" 2.4G active RFID labels do have their own location, but this is not the same as GPS outdoors, UWB cm. It's usually located in a 2 to 5 metre range, and it can be positioned very much -- labels are even reported every 200 ms.
- RFID Knowledge
How do you calculate the price of rfid tags: differences in specifications and factors affecting mass areas
Many people think that the RFID label is expensive, but it's a mix of "type" RFID labels, not a fixed class, but a few dozen products by frequency, chip, and cover, with prices ranging from one or two cents to several dozen dollars.
- RFID Knowledge
Determinants of read distance in rfid tags and validation and optimization of resolution
The conclusion follows: reading distance is a spatial area, not a numerical RFID label reading distance is not a fixed parameter but the result of a combination of different variables such as label type, working frequency segment, reader output power, antenna gain, label orientation and environmental material.
- RFID Knowledge
Active vs. Passive RFID Tags: Differences and Selection Criteria
Answer the question: Should you let the labels call you on their own initiative, there is only one key to your choice: do you need a label to report your position or be asked by the reader and then answer. The former chooses active (active) RFID, the latter select passive (passive) RFID.
- RFID Knowledge
Difference factor for rfid ' s non-dry glue label price and bulk quotation explanation
The price of the RFID non-dry glue label is ranging from a few cents to several dollars, and the difference is mainly from five puzzles of chips, antennas, faceware, wrapping processes and order quantities.
- RFID Knowledge
How to select rsfid tag bands: the applicable border between low-frequency, high-frequency and UHF
The RFID label is not "higher, better." Low-frequency, high-frequency (HF) and hyper-high frequency (UHF) have the appropriate border. The wrong-band selection often manifests itself as a failure to read, or as a result of environmental interference to offset the cost of input.
- RFID Knowledge
Is the rfid tags available: active tags, uwb versus passive program capabilities
The RFID labels can be located, but the "location accuracy" varies considerably. Passive tags only identify "where" areas, active tags can reach room levels (3-5 metres), UWB labels can reach centimetres. The choice depends on how accurate, covering and budget you need.
- RFID Knowledge
Type elements of the rfid tag handheld and fit analysis of the operation scene
The RFID handheld is selected without a "one-size-fits-all" model, and the parameters are beautiful enough to be short-setd in an unmatched scene. The more prudent approach is to break the operating scene into "what to read, how far to read, how to read, how to read, how to read, how to read, how to read" four things at a time, then go over to check the device parameters and pick out the type.
- RFID Knowledge
Efficiency analysis of rfid tag collision-resistant mechanisms with multiple labels read together
Three hundred tags on one load, and five minutes still wasn't enough to read them all. Last year, at an automotive parts warehouse, we came across a familiar problem: one pallet of spare parts held more than 300 neatly stacked totes, each with an RFID tag (an electronic tag that communicates by backscattering electromagnetic waves and can be identified from a distance). The worker pushed…
- RFID Knowledge
How much temperature can rfid labels typically withstand: material versus condition
Last winter, a client who was storing the cold chain came in and said that it had been labeled 15°C on the outside. We took down a couple of defunct tags, the chip was not broken, the welding was unwinded, the problem was that the face was thinner, the label was dropped from the box.
- RFID Knowledge
Structure design for toreproof rfid electronic tags and principles of warning against breaking down
The core idea: to make the "destructive action" itself an identifiable signal, the principle of protection against torn RFID labels is not complicated, but essentially to turn the physical event of "spreaded tags" into electrical anomalies that can be read in a reader.

Ms. Lei
Mr. Pang