How do you calculate the price of rfid tags: differences in specifications and factors affecting mass areas
Many people think RFID labels are expensive, but they're confused with the "type."
The RFID label is not a fixed class, but a frequency, chip, encapsulation of dozens of products, with prices ranging from one or two cents to several dozen dollars. It's also called the RFID tag, which can be a common non-dry sticker for two or three cents, and an industrial label that can be placed in metal equipment that is high temperature, anti-metal, may take more than a dozen pieces or more. The price is determined by specifications and batches, which determine cost thresholds, and the volume determines the actual bargain.
Chips: the largest cost
The chip is the brain of the RFID label, and it's the hardest piece in a unit. A chip determines how much data can be stored, what protocols are used to communicate, how many times you write, how conflict-proof you can be.
The prices of common chips vary widely. There are many models of low frequency (about 125 kHz) and high frequency (around 13.56 MHz), and the cost of a national chip is already very low, with a single purchase price that can be paid a few cents; the UHF chip (superhigh frequency, working in 860-960 MHz bands) is more complex because it has a larger crystal circle, and the cost of a single chip usually ranges from one cent to a few cents. Importing mainstream models plus protocol royalties, which cost 30 per cent to twice as much as national production.
The size of the chip, the number of times it is anti-clipsed, and the security algorithm also opens up prices. The price for chips with encryption or industry-specific authentication is often three to five times the normal model. We've come across a lot of projects, and customers look at the unit price at first hand, but the actual scene requires reading distance or multiple labels, and the normal chip can't hold up, and then we have to go back to the right specifications.
Antennas and materials: neglected cost variable
Many people think that the price of labels is mainly on chips, but in fact the antenna, base materials and etching processes add up to costs that sometimes are higher than the chips.
There are three main types of antenna materials: aluminium etching, copper inch, and ink printing. Aluminum corset is most common, suitable for mass production, with single antenna costs running to one or two cents; copper corrosive catheters are better, and they are more appropriate for the scene where reading and writing distance is required, usually two to three times the cost of aluminium; conductor ink is the fastest, material is most efficient, it is for a single label or logistics label, but conductor stability is less than for an embroidered antenna.
PET (polymer film) is the dominant, high-intensity, temperature-resisting; paper-based is cheap, suitable for logistics and one-off scenarios; PVC (PVC) is used more for card labels; ceramics, ABS (engineered plastics) are used in special environments that are resistant to heat or chemical corrosion. The same size labels, paper-based and non-dry-defended versions of the sheet may cost only a few cents of base materials, while the base and processing fees for high-temperature labels add up several times.
The larger the label, the more aluminium or copper is used, the more linear the single antenna costs. A round-size label of a coin and a card-sized label may be three or four times less expensive for materials.
Seal: dryinlay, wetinlay and finished product label
Similarly, RFID inlay (unenclosed semi-finished products), which is usually divided into three types of industry, with different prices and uses.
The first is dryinlay, which has no face. This is the cheapest form, a low-frequency dryinlay can make one or two cents, and the UHF dryinlay usually goes between three cents and one dollar, mainly for the label printing plant.
The second is wet inlay, which is based on dry inlay and has no dry glue and can be attached directly to the item.
The third is finished tags, which are sealed, such as metal-resistant labels, scrubbed labels, strapped labels, silica wrist bands, etc. The processing costs of these products often exceed the chip and antenna itself, especially those with ABS casings, glued-seated products, and individual processing fees may be a few cents to one or two.
Packaging also involves customization, including surface printing (logos, serial numbers, or QR codes), encoding, lamination, and die cutting. UV inkjet costs more than screen printing, and thermal transfer costs more than UV inkjet. When tighter die-cutting tolerances are required, scrap can also drive up the cost.
Batch ranges: unit prices falling with the Quantified Stairs
The specification is defined, and the lot is the key to determining the actual price. The UHF of the same specification is dry glue labels, with 10,000 and 1 million units of one-to-four times the unit price gap.
Volume pricing for RFID tags generally falls into these tiers. Standard self-adhesive UHF tags are used as an example, with typical industry price ranges:
- Up to 10,000 tags: about 0.60–1.20 yuan each
- 10,000 to 100,000: about $0.35 to $0.7 per single.
- 100,000 to 1 million: about 0.2 to 0.4 for one.
- Over $1 million: about 0.12 per 0.25 per unit
The reasons behind this ladder are several: first, the chip plant has a start-up order (MOQ), and the price of a single chip is much higher than a large quantity when it comes to small quantities; second, the price of a fixed starter is charged for a roll of corroded antennas, with a thinner amount spread; third, manual, code, the human cost of controlling these parts does not increase in linear terms.
This zone is influenced by specifications. Metal-resistant, heat-resistant, special products like this, because of the complexity of materials and processes, small quantities of a unit price could be five or six, or one or two; HF NFC labels are lower than the UHF price because the chips and antennas are relatively simple.
How do you figure out which price you should see?
After reading the decomposition above, then asking for a price will not be a fog. First, what kind of environment is the label used? (Metallic surfaces? High temperature? Liquids? Outdoors?); secondly, how far does it take to read; and thirdly, what data is stored without encryption?
Answer these three questions and about 70% of the specification is settled. The remaining variables are tag construction and order volume. For orders over 100,000, speak directly to an inlay maker about chips and antennas. Below 10,000, a finished-tag supplier is usually a better fit and avoids investment in die-cutting and encoding equipment.
In Shanghai's practice of technology-seeking, most projects change their options repeatedly at the request stage because specifications are not clear. We usually apply a standard set of specifications to our clients, and then we give a price range that is split, so that you avoid placing them at low prices, and then add extra costs. The RFID label is not standard, the price and specification are tied to dead, the more clearly defined, the more transparent the price is.

Ms. Lei
Mr. Pang