nfc label prices make up the resolution: chip, envelope and batch factor
First quotation: chip decides the bottom line
Last year, a customer-selected NFC label for smart shelves, three times the price difference reported by the three suppliers. The first reaction was that people were asking for prices, but when they split up three offers into one item, they found that the chip type was different -- one with NXP NTAG 215, one with an internationally compatible chip, and one without a model only "import." Then the supplier added the chip specification, so the difference was clear.
The chip is the biggest cost driver for an NFC tag. Common models include NXP's NTAG213/215/216, ST's ST25TA, and the FM11NT series from China's Fudan Microelectronics. Packaging and order volume can change the price of the same chip by several tenths of a yuan per unit. The high-volume HF NTAG215 typically costs CNY 0.20–0.30 more than the NTAG213, mainly for extra memory. The 215 has 504 bytes of user memory and the 216 increases that to 888 bytes. If you are only storing a URL, the 213 is enough.
The price difference of the chip itself comes from the protocol version and security level. Supporting ISO 14443A, 15693 or NFC Forum Type 5, different chips cost different; encryption signature functions are more expensive than normal versions. First, before purchasing, let's see if "How many bytes I want to read and write" or "Whether password protection" is directly recognized."
Enclosed links: easily ignored cost increments
Naked chips are not directly usable and need to be sealed.
- Inlay (copper paper label):The chips are placed behind a lined PVC or PET surface, with the common dimensions of 25 mm round, 35 x 35 mm square, 50 x 50 mm square, the lowest unit price and suitable for anti-false retroactive application on overpack or instructions.
- PVC hardcard:Standard credit card size 85.6 x 54mm, membership cards and door-barrel cards are common.
- Dip-flops (epoxy resin):The chip wire is sealed with resin, protected from water and suitable for outdoor or industrial environments.
- Anti-metal labels:The interior is also covered with quarantined magnetic material, which allows for the identification of metal surfaces at the highest price.
The same chip, in turn, is a different seal, and the unit price is more than double. In an industrial inspection case, the client initially chose a regular PVC hard card that could not be read on the metal doorboard of the distribution box, then replaced by a metal-resistant label with a back-of-the-flip scheme, the cost of single pieces increased from eight to two pieces, but functional problems were solved. The cost of such a containment switch had to be budgeted well in advance.
When doing the project, Shanghai-based Scratch technology usually asks its clients where to use it -- where to post, what materials, how far to read, whether to protect against UV, and then reverse the appropriate sealing. The cost of the encapsulation is more than the cost of the wrong chip selection because it's physical at the structural level, and later re-engineering is a start-up.
How does the lot affect the unit price?
NFC tag pricing typically follows volume tiers: 1,000, 5,000, 10,000, and 100,000 units. The unit cost can generally fall by 20%-40% at each successive tier. Chip purchases have minimum order quantities (MOQs), and packaging equipment setup and labor costs need to be spread across every unit. In smaller runs, those fixed costs drive up the unit price.
For a 25 mm round inlay using an NXP NTAG215 chip, indicative 2024 prices were about 0.80–1.20 yuan each at volumes in the thousands, 0.50–0.70 yuan in the tens of thousands, and 0.35–0.50 yuan at 100,000 or more. These are rough guides. Actual prices also depend on chip sourcing, wafer capacity that month, and exchange rates.
And another easy-to-neglect cost item isData Writing and UID Tie. Some suppliers quote for blank tags, leaving you to write the data. Supplier programming of URLs or association of UIDs adds RMB 0.01–0.03 per tag. On 100,000 tags that is several thousand yuan, so confirm it before opening bids.
How do you judge a quote to be reasonable?
When the offer is received, it can be judged quickly at three dimensions:
- Chip Transparency:The model, origin and batch information is clear.
- Cover specification:Size, material, reeling, waterproofness and reading distance indicator. Fuzzy description often implies a back end price increase.
- Start obligating and timed:Specify the volume tiers for each quote clearly. It is best to list unit prices for every tier from 1,000 to 1 million units to avoid disputes later.
If the budget is tight, order a trial lot in the low thousands to verify chip performance and package compatibility before negotiating production pricing for tens of thousands. A few hundred yuan more on samples can prevent losses if compatibility issues only emerge during mass production.
Looking at the price logic of NFC labels as a whole: Chip is the base cost, the encapsulation is an additional floor fee, and bulk determines the efficiency. Three stacks plus data writing and special processes (coding, UV printing, laser engraving) are part of the final offer. Ask each one to be clear, the buyer will not see only a large number but will judge what money is spent and what savings.

Ms. Lei
Mr. Pang