Difference factor for rfid ' s non-dry glue label price and bulk quotation explanation
RFID Knowledge

Difference factor for rfid ' s non-dry glue label price and bulk quotation explanation

PublishedShanghai Zejie Smart Technology Co., Ltd.

The price of the RFID non-dry glue label is ranging from a few cents to several dollars, and the difference is mainly from five puzzles of chips, antennas, faceware, wrapping processes and order quantities.

Cost: Five components of unit price

Also known as the "RFID non-dry glue label" the cost of different configurations may be more than ten times different.

Chip: programme difference between imports and national production

The common programme is one of the most expensive ones in a label. The imported chip (e.g. Alien Higgs, Impinj Monza series) is better marked for stability and consistency, with single chips usually priced at 0.3-1 meta-zones; national chips (e.g., a program for manufacturers like twilight electronics) are more competitive, with singles in the range of 0.05 to 0.3 dollars. The difference is followed by protocol compatibility, good mass output, and performance under different readers.

When we do programs for clients, we usually identify their existing type and brand of readers, then push the chip programme to avoid the embarrassment of "cheese without reading."

Antenna: cost gradient for three processes

An antenna determines the signal reception capacity of labels, with three main processes:

Face and cover: determines how long it takes.

The average copper sheet of paper costs the least, but it is resistant to tearing, heat, and damp-resistant; PET, PP synthetic paper is slightly more expensive and more resilient to scratch; when you need to put on a metal surface, you need an anti-metallic suction material that will allow the unit price to float from 0.2 to 0.5. If labels are to be placed in a high wet, low temperature or oily environment, the choice of the containment process (tip, laminate, moth, moth) has a direct impact on the unit price and on the life of the service.

Effect: What's the difference?

The price is not good, the price is not bad. The key is to see if you need the power to change the price.

Read-and-write distance and consistency

Under the same size label, imported chips are bound to carving antennas, and UHF frequency is usually able to read 8-12 meters with steady reading, and group reading speed is more stable; national chips add printing antennas, which can be read at distances of 3-6 metres, with leakage during group reading. Logistics warehouse inspections, streaming lines tracking such scenes often require remote group reading; doorshop security, ticket write-off scenes, few centimetres to one or two metres of reading distance, do not have to pay a premium for overdrafting performance.

Environmental adaptation and longevity

The outdoor asset label, if it uses just plain copper paper, may drop chips in six months, signal decay. We saw a cold-chain customer who initially took the low price option, and then went through the bulk after three months in an environment - 18 °C, and then went back to work, at a higher cost. The environment is complex, with life requirements for scenes, and we suggest that budgets be added to the facebook and cover.

Batch size: Start-up is the first lever for unit prices

The unit price of the RFID label is very sensitive to the mass, because the cost of chips, modulations, and humans are "starting" at all three.

This is clearly stated in Shanghai's proposal-making policy, which avoids the other party's focus on unit prices while ignoring the order and delivery. The bulk offer usually involves pre-printing fees, chip pre-coding, data writing services etc., which are best listed once in a while when asking for proposals, saving later additions.

Applicable scene: what needs to be configured

Select RFID, which is not a dry glue label, essentially balances "performance, cost, use." The following common scenarios can be used as a reference for configuration:

There is no need to pay for over-configuration if the scenes are not rigid to read distance, durability and safety.

A few holes that are common to the offer.

A few times, RFID buyers find that the price offers contain a lot of traps.

The key to avoiding these pits is to give the demand (chip schemes, antennas, face, dimensions, reading distance, reader type, batch, delivery, environment) once to the supplier, and to get the other side to present a full offer instead of a single blank label.

Proposals for action

Before you get the RFID non-dry tape label offer, you answer three questions: what's the scene, how much is the amount of the existing reader? These three questions are clear, and the offers are comparable. The same specification, the same volume, is more spectrometric than a single offer for two or three suppliers, and the larger the lot, the more it is worth writing in front of the print, the code, the sample, the more it is written in the contract.