How much for a rfid tag: Quote quote by frequency segment and process
The price of RFID labels varies from a few cents to several dozen dollars, and the difference is mainly from frequency bands, chips, sealing processes and purchases. Ordinary UHF (ultra-high frequency) non-dry tape tag batch procurement can be around 0.5 yuan, anti-metals, special envelopes or small batch customizations may go up to a dozen or even tens of dollars.
Point 1: Low-frequency and low-frequency (HF) HF, with the widest UHF slot
The labels of different frequency bands (i.e., radio frequency segments used for tagging and card readers communications) vary in structure and application and are priced out significantly.
- LF (low frequency, 125-134kHz): Common in animal earmarks, door-barrel cards. Glass tubes are sealed at about $1.5-5/map, plastic case amounting to $3-10 and bulk purchasing can be pressed to the top of $1.
- HF (HF, 13.56 MHz)NFC (near-to-time communication) label, library ridge tag, member Cardo in this box. Naked inlay (only semi-finished chips and antennas) is about 0.4–1.5 yuan, PET (polymer film) is not dry for 0.6–2 yuan, PVC card blank card 0.5–1.2 yuan.
- UHF (UHF, 860-960 MHz)Logistics, retailing, and asset management. The largest slotting ranges - normal paper labels of 0.5-2 yuan, anti-metal tags of 5-25 yuan, ABS (engineered plastic) shell hard mark of 8-30 yuan, with special industrial grade levels of over 40 yuan.
If the project requires low distance and does not require a bulk inventory, HF is the preferred value for money; to be read in the whole tray, long-range identification is basically only UHF.
Element 2: Split by encapsulation process, with the cheapest finished product and priced on the shell
The unit price may increase several times over the same chip, in exchange for a covert process.
- Fuckinlay.: Only chips and carving antennas, with no glue on the back. The unit price is 0.3 to 0.8 dollars, which suits the customer that you post.
- Wet inlay: Ionized paper and back-flips can be labeled like normal labels. The unit price is 0.2 to 0.5 yuan higher than dryinlay.
- Non-dry glue tags: Printed layer (copper or PET) based on wet inlay. The normal UHF paper label is $0.6-2 and the flash film or synthetic paper is added 0.3 to 0.8.
- Anti-Metallic Tags: The bottom is a magnetosphere to avoid the "eat" signal from the metal surface. This is the largest range, ranging from $5 to $25, and the bigger it is, the more far it is from reading and writing.
- Hardshell/Industry labelABS, PC (polycarbonate) or ceramic casings can carry high temperature, corrosive, and impact. The average is $10-40, which is the only scenario for automobiles, metal containers and so on.
In short, you bought not a RFID label, but a combination of chips + antennas + sealing mode + shell, each extra floor.
Point 3: Chip determines the price floor, with a difference of 1-3 times between domestic production and imports
In the same size and process, the change of chips is often the largest variable. The reading and writing properties of imported chips (NXP, Impinj, Alien etc.) are stable, compatible, and single chips are purchased at a price that is 1 to 3 times more expensive than national production. National chips have matured in recent years in the UHF segment, read and write in general, and bulk count is fully produced in the country; if they are exported to Europe and America, they have systems that are preferred for import.
The price is also influenced by the chip memory. 96bit EPC (product electronic code, storage area for only marked items) is a small-capacity slot that is commonly available in retail; 256bit, 512bit is used more for industrial scenarios requiring more business data, plus 0.1 to 0.3 dollars in single pieces.
Element 4: Batch and customization are key to price containment
The same SKU (specific specification model), 10,000 and 1 million offers may be 40% different, because the price of a model is open, it is cut, and printing has set a threshold. Below are several cost points that are often overlooked:
- Start Quantification: The factory generally requires a single unit of 5,000 to 10,000 units, less than double the direct unit price of that number.
- Print Custom: Adding a logo, QR code, or serial number usually costs an extra 0.05–0.30 yuan per tag, depending on printing method and quantity.
- Encoding Writing: The factory prewritten the EPC data with 0.02 per 0.1 and wrote it on its own without spending money.
- Term of submissionRegular 7-15 days, 3-5 days of possible increase 10%-30%.
When we choose to give a client, we usually ask three numbers: annual usage, single-down volume, need for printing and pre-coding — these three questions are clear before the offer falls into a meaningful small area.
Element 5: Several pits that can easily be stepped on when choosing a model
The price is only part of the selection, and the following are best recognized before signing the contract:
- Read distance by scene: Not just 10 meters, but 2-3 metres in the metallic and liquid environment.
- Consistency of protocols: UHF label is to confirm compliance with EPC Class 1 Gen 2 (Air Interface Protocol for Industry), otherwise the old card reader may not read it.
- Environmental sustainabilityOutside, high temperature and acid scenes must select industrial-grade shell, with no ordinary non-dry glue for the savings of a few dollars.
- Sample testing: Take 50-100 samples first, run a lot of the count in the real environment.
In general, the RFID label does not have a "standard price" but "a certain frequency, process, reference price under a certain scale." To get a ration, you better give the user-based scenario, a tablet, three times a year. The more complete the information, the more the offer is, the harder it gets for you to get caught later.

Ms. Lei
Mr. Pang