Type of UHF readers: broken down by frequency band and form
In warehousing, manufacturing and retail scenes, UHF readers usually refer to equipment used to identify passive UHF RFID tags, often referred to as UHF readers. The procurement can be classified from two dimensions. The frequency band determines which area the device is set up, where the device forms the antenna, who initiates reading, how the data is handed over to the operating system. One handheld and one channel device can use the same label, but each has different tasks and acceptance conditions.
Check the use site, then fix the frequency band and regional version
The term "860-960 MHz" on a reader's information usually indicates the coverage of a hardware series or label product. When you fall into a specific project, you need to confirm the regional configuration of the equipment actually enabled, the antenna support range and the sensitivity of the label in the target frequency band. Common deployment bands can be used as a starting point for queries, and ultimately check the specifications of the area where they are used and the delivery type document.
| Land of use | Common range of inquiries | Information required for vendor confirmation |
|---|---|---|
| mainland China | 920–925 MHz | The radio type approval information for the delivery model, regional solids and associated antennas can be checked against the Ministry of Industry and Communications Radio Management Requirements for 900 MHz band frequency frequency recognition (RFID) equipment. |
| Europe | 865-868 MHz is a common deployment frequency | Deliver configuration and conformity documentation. When using a higher frequency segment, check the channel and conditions of use allowed in the target country. |
| United States | 902–928 MHz | FCC ID of equipment, authorized frequency, approved antennas and related installation conditions. |
| Japan | Check with local 920 MHz device configuration | Models, practical channels, equipment types and local authentication information for Japanese sales. |
For example, a group of clothing is domestically marked and then shipped to a European warehouse. If two warehouses follow the same item code, the code code rules can continue to be used. The radio frequency performance is verified in two areas. Antenna gain changes with frequency, labels are affected by materials, packaging thickness and labelling direction when they are posted on the goods. Cross-border projects can take the same object, each two-part configuration to test the remote end, side-posting and stacking samples, confirming that the same label will stabilize into business processes at both ends.
If the device has an external antenna, it should also specify whether the specifications are for reading and writing port output power or a radiation indicator that takes into account the antenna gain and feeder loss. When changing the antenna, both coverage and compliance configuration may change. The request for quotations can directly require the supplier to indicate the host model, antenna number and configuration file actually delivered in each area.
How do you distinguish the six device forms?
Fixed external antenna reader
Readers are installed in the cabinet or fixed point, and can be used to connect the antennas in different directions with a feeder. The location suitable for the delivery line, the production space and the storage door need to be adjusted to the site.
One-List
Antenna and RF modules are integrated in the same shell, and can be installed. They fit a centralised area of identification such as counters, card-card slots, small garments, and a compact space. The selection is based on actual installation postures, antenna cover angles, frame-regulated space and adjacent areas. When you cover several different directions, you need to evaluate the location set.
Handheld Reader
The sample is checked on a continuous, short-time and waiting scale, as well as checking the connection to the business application, offline storage and back-up, and how many people count.
Channel Read-write Device
The gate or tunnel is the carrier, which normally consists of a reader, antenna, sensor and control interface. It is suitable for transport to a package, whole box or whole-to-place. The request should also provide the width of the channel, the height of the goods, the maximum speed and the maximum number of labels, and the delivery party is required to indicate how the abnormal goods are reviewed.
Embedded reading and writing module
For printer, smart cabinet, self-help devices, etc., the whole machine is integrated, usually controlled by a module command or SDK. The integration equation handles power supply, heat dispersion, antenna layout, event resolution and the whole machine authentication border. When the module is replaced, the command version should be checked, and the working temperature increases and the wrong return method.
Car-borne readers
Mounted on forklifts, AGVs, or other mobile equipment for tasks such as verifying loads or identifying checkpoints as the vehicle passes. During a trial installation, check how vehicle power fluctuations, vibration, antenna mounts, and the metal structure of the vehicle affect the read zone. If reads must be linked to a specific vehicle and a loading or unloading action, provide the vehicle ID, trigger signals, timestamps, and offline buffering rules. Projects that need position data should separately confirm the positioning source and accuracy.
These names cross. The "fixed" description describes the installation, "one" describes the structure of the host and antenna, "channel" describes the application of the whole set of equipment. A single machine can be fixed to a working slot, and a fixed host inside a channel may also be used for external antennas. It is best to write in the technical agreement that the device consists of an antenna and sensors, and who completes the business integration.
Two procurement scenarios. How should the specifications be changed?
The clothing door stock and receipt.When you need people to move around the shelf at night, you need to check your inventory more closely and hand-held operating path. The receiving point has a fixed position to identify the whole box label, but to verify the stacking with actual packaging during the season and to check it with the receipt order. The application of both types of equipment requires a consistent resolution of the same tag code, indicating which end the data is uploaded, and how to handle duplicate submissions.
The production line contains a reader into the label device.If each label is written into a serial number, the test focuses on success in writing, rereading the same, the failure to remove the missing and whether the next blank label is miswritten. Space and temperature are clear, and can be used to evaluate embedded modules when the whole machine is developed. The workspace is sufficient, the interface is ready and needs rapid deployment. The sample machine is compared with the test results at the distance between the actual delivery rate and the working space.
Four of the first things on the quotations.
- The label and command match.Checks the support of EPC UHF Gen2 or ISO/IEC 18000-63. Reads the EPC, read other storage areas, write, lock and so on, and then separates them, to be verified with the actual label of the project and the software.
- How do you get the data to the top system?Confirms the physical interface of a gateway, a serial or USB, and the application layer protocol, the platform and event fields supported by SDK. The automated site also confirms the electrical conditions of the GPS, enters an output direction and trigger to determine whether PLC can be directly connected or isolated.
- (c) Under which conditions the prototype indicator is measured.The working temperature, shell protection or anti-resilient indicators are also checked for the cold storage, outdoor or mobile environment.
- How to maintain compatibility with software upgrades.Requires that the hardware type, area settings, solidware and SDK versions delivered be written. Rereading, triggering, offline recovery and abnormal return when the system or device version is changed.
An Quoted Demand can be written as "Equipment for use in mainland China, a position to process a metal suit, real tags on the side, a PLC trigger when it is in place, Business Systems Receive Work Number, EPC and Read Results, which require on-site validation of a string reading with the adjacent waiting area". Such a description allows different suppliers to give configuration and acceptance under the same conditions, and also enables teams to judge before purchasing whether more antenna ports or further distance are really needed.

Ms. Lei
Mr. Pang