Fixed RFID Reader Deployment at Portals and Workstations
The same fixed RFID reader, which is installed in the store door, usually determines whether a shipment has passed through the specified entrance. It is installed at the working slot, and it is used to identify which material is involved in the current process. The former serves the access library and batch transfer, the latter serves single-formulation, miscalculated verification and processing. When you select deployment, you clearly find what the label will record after the tag, and which link will be affected by missing one time.
Push identification point backwards from business records
For example, a consignment is sent from the warehouse to the line of production. The warehouse needs only to know if it is passing through the platform, and can read the tray label at the gate, and then follow the checked and continuously maintained loading relationship-linked box. If you open the connection halfway through, change the box or spell-up, the original loading link is rechecked. Only when you actually read the list and cross-check it, there is a basis for recording that each box has been passed.
When you get to the assembly position, it is a matter of when a finished product with a certain serial number is used. Here you need to link the material label, the product serial number, the work place and current worksheets, and confirm them when the input or process is completed. You can only get a record, and the process attachment requires a post signal and operational verification.
| Business facts requiring confirmation | Priority deployment locations | Focus on the field |
|---|---|---|
| A consignment passed the designated platform. | Coop or platform passage | Passing directions, mission attribution, adjacent door interference |
| The whole box is on the shipping manifest. | Access or designated review points | Toner mask, label density, missing patches |
| A product uses specified materials. | Actual feed or assembly positions | Lines tied, miscalculation processed, signal connections |
| The batch and assembly process can be traced back. | KUMONGA KEY WORK | Distinguishing between two events, each retaining a point of time and responsibility |
The door must recognize the movement and exclude the goods outside the door.
A physical error is that when the forklift passes through the A door, the A door reads the undisclosed tray. For a reader, both labels can be real radio-frequency responses. For a warehouse management system (WMS), only those who meet current gate levels, direction and mission conditions can enter the list to be checked. If you first record the read label directly, then heavy it backstage, so that you can reduce duplication of records, and not solve the problem of keeping other items on this vehicle.
- Define reading areas and trigger conditions.When you have a two-way traffic requirement, you can determine the direction by the order of two sets of sensors and test the reverse, turn over and stop inside the door separately.
- Align antennas with full load.View the four corners of the tray along the real route, the inner and bottom layers. When labels are moving towards instability, compare antenna position and polarization. Metal surfaces verify anti-metallic labels or actual installation intervals, and liquid goods are tested with full-load samples. When power is increased, it should be checked whether goods outside the door and adjacent corridors are brought in.
- Let the anomaly have a clear exit.Record the corresponding label list that triggers this time, and compare it to the tasksheet. If you find missing items, additional tags or directions are not known, keep the original records, which are either swiped or checked by the person at the given location. Update the list with the same business event number after completion, and avoid re-entrying.
The continuous overload also requires verification of the incident stratification of two steps. When the identification range is long, the time of the two stages overlaps, and the single-threading window combines the two-trail labels. By adding a split signal or line beat control to the fixed distance, then comparing processing times and anomalies.
The position deployment will bind the tag to the current operation.
For example, the programming logic controller (PLC) can detect a workload when it is in place, verify current worksheets, product identification and material coding, and back-check and process results to the manufacturing implementation system (MES). If the material shelf is close to the site, read only one label that may be the prefill area. The debugging should allow the material to appear at the same time as the last remaining material and the material in operation, check who was finally bound by the system.
Angles, distance, local shielding and power control narrow reading areas are installed first through antennas, then put in place to fix the time when a lock-in or process command is activated. When you share a multiend mouth reader, verify whether two jobs can be activated at the same time as the device fails, and how many jobs will affect if you need to write a label. If you want to, you should also lock the target label, finish reading back and check the results. The device locking and security protection is covered by the appropriate control system, and the result can be used for operational confirmation.
Do not count the number of repeats as recognition, by recipient.
Before the pilot, prepare a list of real values checked on-site for each pass or workspace operation. Dozens of responses are received at the site with the same label, and only one label is counted when calculating. Recording the expected tag in turn, read the label, the final system account results and processing time to distinguish between missing reading, serial reading and business processing errors.
- Label Leak RateThe number of labels that should be read but not read divided by the total number of labels that should be read. The same label is included in the respective generics for different general tests.
- Complete completion rateThe number of traffics read in full by the expected label is divided by the number of times that the total number of traffics is tested. For example, 10 to each should read 100; if 5 to read less 1 each, the rate of access to the label is 99.5%, and the whole-to-do rate is only 50%. If business requires a complete-trail automatic release, the last caliber directly determines how much torts are manually reviewed.
- Misdirection rateAs agreed by the project, the number of events containing an erroneous account is divided by the total number of test events. The adjacent label is read by the device but stopped by the operating rules and counts separately in the original log to facilitate the assessment of the quality of the reading area.
- Process timedThe normal peak, network timeout, retest and manual review are counted separately.
The receiving and inspection sample should cover the most rapid actual traffic speed, maximum load, common packaging, labels heading in parallel with two doors. The workspaces are then added to misdemeanor, empty fittings, fast replacements and abnormal recovery. The threshold values for the above indicators are determined by operational risk and production rhythms, and test reports record sample numbers, cargo and label configurations, which can be easily retraced after changing batches or moving.
Leave a space in the budget for review and shutdown.
The input of the portal is usually concentrated on the shelf, antennas, trigger sensors, construction and business interface. The input for the workspace project is often spread over the assembly and retrofitting, wiring, and the slot application is linked to MES. The request price is estimated separately for equipment, installation, system integration and routine abnormalities. If a door often requires to be untraceed, manual review may become a continuing cost. If multiple sites are co-readers, the cutoff from the shared device should be included in the program.
The batch transfer of the warehouse can be done first by assessing the portal, process release and single-formation can be evaluated first. When you combine the two, you can record the chain of trace in a separate receipt and processing. The device selection can wait until the actual reading area is clearly validated on site, the antenna covers and the event time is spent.

Ms. Lei
Mr. Pang