Four-Port UHF RFID Readers for Multi-Lane Inventory and Sortation
RFID Knowledge

Four-Port UHF RFID Readers for Multi-Lane Inventory and Sortation

PublishedShanghai Zejie Smart Technology Co., Ltd.

The 4-channel UHF readers usually provide four radio frequency ports that can connect to the UHF RFID antenna. In a multi-cargo project, these antennas can be distributed to different cargo positions or can be used to cover difficult-to-read locations with a side-sided cover. On the sorting line, multiple ports are often used to cover different label positions in the same conveyance. A machine using a wheeled query divides reading time to each port, and is designed to check the equipment switchup strategy, one end presence time and operationally permitted waiting times.

Multi-track DMV is a first-spectrum test of where the antenna is going to cover.

If you have three adjacent lanes each with one antenna, the fourth is used to cover the second channel's depth. The port number can only determine which antenna is received. The tag in the second track may also be read by the first or third antenna. If you apply the port number as a position, the system will assign the inventory to the wrong location, even though the entire liner label has been read.

When deployed, you can prepare a set of items identified by a number for each course, first to release them in one channel, then to rotate all antennas, and to write the logs that are read at each port into the table. To another track repeats, then to test the adjacent lane full of loads, with the edges marked and the target lane empty. Here is a set of hypothetical data, showing how this table is used to locate the string.

Actual place of release Port1 Port2 Port3 Port4
Route 1, 20 units 20 3 0 0
Route 2, 20 units 2 17 0 6
Route 3, 20 units 0 1 19 0

For lane 2, take the union of the EPCs from ports 2 and 4 and check whether the fourth antenna captured the three missing items. Adding the two port totals counts duplicate tags. Port 2 picked up three items in lane 1. Adjust antenna direction, mounting position, or effective power, then verify that tags on the boundary can be assigned consistently. Metal shelving creates reflections and obstructions that alter the read zone. Retest after changing dividers, stock density, or antenna placement. Received signal strength can help with troubleshooting, but location assignment should also use actual test results and business trigger conditions.

The sorting line is then pushed to the antenna with the goods' stay.

The length of the label that you read is measured on the delivery line. The length of this active reading area divided by the speed of the line, and estimates the time the label leaves to the reader. The most difficult position of a user label to find boundaries is that the distance from which the label can be read from a distance to a distance is suitable for initial reference.

Assuming that the active reading is 0.40 m long, the label is approximately 250 ms per second, with a delivery speed of 1.6 mm, and the labels remain in the reading area. The four ports are rotated, with an inventory of 70 ms per port, each time costing 5 ms, and a round of about 300 ms. If the label is only reliably identified by the fourth sub-axis and enters the reading area just as soon as the fourth end of the portal ends, it will be able to wait for about 230 ms to be re-enabled again, leaving only 20 ms to be identified. If two sub-lines can cover the required attitude, then the same parameter is rotated, the target port will be re-engineered at a maximum of 80 ms, using the full 70 ms inventory time at this stage. Actual reading is also affected by trigger bias, label density and read-area fluctuations. The field data test is required. The parameter is used to show how the calculation was made.

You can first have a package passed at the actual speed, recording the first reading time of each top, side or bottom mark. Then you can let two items go through in consecutive intervals with a minimum permissible distance, and see if the latter label will enter the previous reading window. If all four antennas are necessary, you can compare the order of different ports, then you can set the port on the sensor, expand the active reading area or configure an independent reader for competitive workspaces, and select the option by the performance of the hardest sample.

Link the reading to the one on the line.

On a traceable device line, when the package triggers an entry PV sensor, PLC (programmable logical controller) or the transmission control system generates this item's tracking number and records its location. Readers return to the EPC and available ports within the associated window, time information. The collector arranges readings by a tracker, then hands over the confirmation of the item and the sorting target to the delivery control system. When the speed is subject to change, you can follow the signal with encoder slots or subsequent sensors.

If two items are close together, both valid EPCs may appear in the same read window. If the workflow requires one tag per item, send multiple codes, missing codes, and timeouts to separate review paths. When an item reaches the decision point before sorting, the controller should already have an actionable result. Record separately when the source reads the tag, when the application determines the destination, and when the controller receives the result. These timestamps reveal whether the bottleneck is in tag inventory, network transmission, or decision processing.

Distinguishing reading areas, inventory and reporting problems in case of leakage

  1. Only one port is missing.Keep the same sample and postage, exchange two validated feeders or two antennas, and observe whether the failure moves with the component on a case-by-case basis. Check the output of each port, the loss of the feeder under the actual frequency and the connexion status.
  2. Low density is normal and fails when the goods are large or fast.The Q-parameter of Gen2 inventory influences the range of random tab responses. When a small Q is involved in the inventory labels, it may increase collisions and larger Qs may have more space. When equipment supports adaptation from configuration, it can be shown by low density and two groups of samples. When adjacent multiple readers run simultaneously, separate inter-rewriter interference should be tested.
  3. Reader records. Control end result error.The focus is on close access, stopline re-entry, time outback and repeat reporting to see which product was eventually bound.

Equipment acceptance and inspection is subject to two types of business results.

Multi-track pallets should record the expected labels, identify the completeness and number of wrong landing lanes, and also detect how the karates are affected by the adjacent full load. The sorting lines should be measured by the appropriate diversion of the package, the misdirection, the failure to enter review and the number of times later than the decision point, and the results reported separately at the highest beat and the minimum range. Before sharing a host, you must account for whether each port can be read in time for the trigger requirements and the scope of operations that the main gate is being shut down. These results can be used to determine whether to continue sharing the four-end hosts or to deploy the high-lighted reading areas on its own.

References