How much for a rfid tag: Quote quote by frequency segment and process
RFID Knowledge

How much for a rfid tag: Quote quote by frequency segment and process

PublishedShanghai Zejie Smart Technology Co., Ltd.

The price of RFID labels varies from a few cents to several dozen dollars, and the difference is mainly from frequency bands, chips, sealing processes and purchases. Ordinary UHF (ultra-high frequency) non-dry tape tag batch procurement can be around 0.5 yuan, anti-metals, special envelopes or small batch customizations may go up to a dozen or even tens of dollars.

Point 1: Low-frequency and low-frequency (HF) HF, with the widest UHF slot

The labels of different frequency bands (i.e., radio frequency segments used for tagging and card readers communications) vary in structure and application and are priced out significantly.

If the project requires low distance and does not require a bulk inventory, HF is the preferred value for money; to be read in the whole tray, long-range identification is basically only UHF.

Element 2: Split by encapsulation process, with the cheapest finished product and priced on the shell

The unit price may increase several times over the same chip, in exchange for a covert process.

  1. Fuckinlay.: Only chips and carving antennas, with no glue on the back. The unit price is 0.3 to 0.8 dollars, which suits the customer that you post.
  2. Wet inlay: Ionized paper and back-flips can be labeled like normal labels. The unit price is 0.2 to 0.5 yuan higher than dryinlay.
  3. Non-dry glue tags: Printed layer (copper or PET) based on wet inlay. The normal UHF paper label is $0.6-2 and the flash film or synthetic paper is added 0.3 to 0.8.
  4. Anti-Metallic Tags: The bottom is a magnetosphere to avoid the "eat" signal from the metal surface. This is the largest range, ranging from $5 to $25, and the bigger it is, the more far it is from reading and writing.
  5. Hardshell/Industry labelABS, PC (polycarbonate) or ceramic casings can carry high temperature, corrosive, and impact. The average is $10-40, which is the only scenario for automobiles, metal containers and so on.

In short, you bought not a RFID label, but a combination of chips + antennas + sealing mode + shell, each extra floor.

Point 3: Chip determines the price floor, with a difference of 1-3 times between domestic production and imports

In the same size and process, the change of chips is often the largest variable. The reading and writing properties of imported chips (NXP, Impinj, Alien etc.) are stable, compatible, and single chips are purchased at a price that is 1 to 3 times more expensive than national production. National chips have matured in recent years in the UHF segment, read and write in general, and bulk count is fully produced in the country; if they are exported to Europe and America, they have systems that are preferred for import.

The price is also influenced by the chip memory. 96bit EPC (product electronic code, storage area for only marked items) is a small-capacity slot that is commonly available in retail; 256bit, 512bit is used more for industrial scenarios requiring more business data, plus 0.1 to 0.3 dollars in single pieces.

Element 4: Batch and customization are key to price containment

The same SKU (specific specification model), 10,000 and 1 million offers may be 40% different, because the price of a model is open, it is cut, and printing has set a threshold. Below are several cost points that are often overlooked:

When we choose to give a client, we usually ask three numbers: annual usage, single-down volume, need for printing and pre-coding — these three questions are clear before the offer falls into a meaningful small area.

Element 5: Several pits that can easily be stepped on when choosing a model

The price is only part of the selection, and the following are best recognized before signing the contract:

In general, the RFID label does not have a "standard price" but "a certain frequency, process, reference price under a certain scale." To get a ration, you better give the user-based scenario, a tablet, three times a year. The more complete the information, the more the offer is, the harder it gets for you to get caught later.