RFID Knowledge
(b) View the latest RFID knowledge content and learn about relevant technological advances, industry trends and application practices.
RFID Knowledge
1875 articles- RFID Knowledge
What are the types of fixed asset inventory scanners?
Select whether to take a fixed asset-scale sweeper, or usually to fix it in one dimension or two dimensions, wired or wireless, common scanner or handheld terminal with an operating system.
- RFID Knowledge
How are the gains and losses on asset counts treated?
The inventory of assets shows gains and losses, which do not allow for the physical count to be covered directly by bookings. The process of inventorying should be repeated, the reasons for discrepancies verified and approved, and the accounts adjusted for reasons: the excess and loss normally offset management costs, the losses due to normal wear and tear or management causes are usually charged to management costs, and liability compensation, residual materials and insurance claims are recognized separately.
- RFID Knowledge
How do we proceed with the detailed process of the fixed asset inventory? A step-by-step statement of operations
The fixed asset inventory is usually carried forward by “setting the scope, preparing the list, field verification, review of discrepancies, approval adjustments, filing and tracking”. The key is to match the bookings to the physical, recording the location, status and responsibility of assets and maintaining a basis for verifying each discrepancy.
- RFID Knowledge
How does the fixed asset inventory cycle be determined? Frequency is based on and spacing
The fixed assets count is monthly, quarterly or annual depending on the value of the asset, liquidity, risk of use and differences in last count.
- RFID Knowledge
What about the asset inventory software? Functional modules and recognition capability
The inventory of the warehouse is checked with a scrutinizing rifle, but the number of books still does not match in physical terms.
- RFID Knowledge
What are the technical routes for asset locator counts?
Whether the asset locator count selects RFID or UWB depends on whether you are going to address "Quick Identification and Inventory" or "Super-Access Location". The RFID is suitable for bulk reading of asset labels, and UWB is appropriate for tracking changes in location within the region; if both an inventory and a location are required, it can be used by reference to asset value, frequency update and field environment combination.
- RFID Knowledge
How to conduct periodic asset counts? Cycle management and data application
The key to a regular inventory of assets is not how many people are invested at one time, but the ability to get through "cycle management" and "data application" — a cycle that moves an inventory from reactive to controlled routines, with data allowing each count to be used as a basis for decision-making rather than an overstep.
- RFID Knowledge
Stockroom Asset Counts: Linking Storage Locations and Counting Inbound and Outbound Stock
The inventory of the stock is properly controlled. The key is to have a clear code and a fixed identification for each of the items, and to link the contents, transfer, exit and inventory records.
- RFID Knowledge
How are fixed asset counts implemented? Standard processes and frequency count arrangements
The inventory cannot be numbered, but the location, use status and responsible person are checked. The procedure is to establish a range and base date before the list is processed, differences are processed and approval records are maintained; the frequency is structured according to asset value, liquidity and risk-based use.
- RFID Knowledge
What are the content of the asset inventory services? Scope of services and delivery criteria
The most common card points at the inventory site are: assets in the form that cannot be found on the ground; equipment is still in use, and booking status shows idleness. Asset inventory services are not just counted, but also check location, status and account information and create a list of retroactive discrepancies, inventory reports and recommendations for follow-up.
- RFID Knowledge
How to use office asset counts? Lightweight programmes and mobile operations
The key to a smooth inventory of office assets is not to start with complex systems, but to link asset lists, on-site checks and differences processing.
- RFID Knowledge
How do you choose the asset count scanner? Model parameters and points of use
Many candidates are able to count the scanned guns at a speed or code distance; what really affects the efficiency of the inventory is often the type of bar code, the environment on the ground, the connection mode and system fit.
- RFID Knowledge
What are the fixed assets inventory methods? Manual, sweep and automatic identification
The stocking of fixed assets, which many in the business feel "at the end of each year is good enough to count", is often a reality: the card machine on the books has been in the corner of the warehouse for three years, hundreds of books are missing from the physical count, the team is exhausted by a round and the data are not yet available.
- RFID Knowledge
Two-dimensional code for asset counts or RFID?
The two-dimensional code is lighter, process visualized; RFID can be read in bulk under certain conditions, provided that reading and writing equipment is installed and field interference is handled.
- RFID Knowledge
How does the asset inventory service choose? The competency assessment and cooperation model.
The key to selecting an asset inventory service provider is not to be less expensive than the one that offers it, but rather to see whether the scope of services, on-site implementation capacity, data delivery quality and accountability boundaries match.
- RFID Knowledge
What steps are being taken in the fixed assets inventory process?
The finance manager of a manufacturing industry, Zinventory counting, first took over the fixed asset in late last year. I thought it was over by workshop with a bill, and then I turned over the car in the first day: equipment labels were off, physical positions moved long ago, several machines were on the books one night, even though they were dead.
- RFID Knowledge
How do you implement the fixed asset bar-coded inventory? The tag printing and collection programme
The fixed asset bar-code count is three things: the asset table account is organized, labels are printed on site conditions, and the differences are captured. The code is an asset identification, and whether or not it is calibrated depends on consistency in coding rules, tag locations and inventory processes. It is recommended that this be implemented with a small pilot scale and then extended to full assets.
- RFID Knowledge
What should be taken into account in the asset inventory? Data accuracy and process specifications
The inventory is not necessarily an error in number or a discrepancy in the booking deadline, asset tags are removed or the liability is changed to unregistered. The asset count requires clarity about scope, calibre, on-site verification and processing of differences, with a reviewable record to allow for accurate results and process discipline.
- RFID Knowledge
How is the asset inventory management approach developed?
The asset count is thought by many to be a periodic inventory of the amount and form. The management approach is designed in such a way as to provide an indication of the range, job responsibility, frequency of the inventory, and processing of discrepancies and retention of information.
- RFID Knowledge
How is the inventory and fixed asset inventory drawn up?
Many people think that inventory and fixed assets are to be counted in two sets. In practice, both types of asset can be captured on the same floor table for on-site information but are managed separately through asset class fields, discrepancy rules and a follow-up reconciliation process. The form is to record “what is on the books” and “where is on-site, what is actually on-site”.

Ms. Lei
Mr. Pang