How do you choose the asset count scanner? Model parameters and points of use
Many candidates are able to count the scanned guns at a speed or code distance; what really affects the efficiency of the inventory is often the type of bar code, the environment on the ground, the connection mode and system fit.
Start of selection: look at asset tags and the inventory environment first
A scanner reads the barcode printed on a tag. Readability depends first on the symbology and the tag's condition. Code 128 and Code 39 are common 1D symbologies; QR codes are 2D. For asset tags with both types, choose equipment that supports both and verify with your actual tags rather than judging by specifications alone.
The field conditions change the choice: office counts are usually light, easy to connect; a warehouse or workshop may need to read distance more far, more durable shell, or adapt to dust, wet protection. If the label is placed in a narrow position, the surface is reflecting or worn out, it is recommended that the search be done at different angles and in light, to confirm the readability.
Key parameters: read and understand scanning engines, distance and connection
- Scan engine:One-dimensional engines are suitable for reading one-dimensional codes; two-dimensional video engines can read one-dimensional and two-dimensional codes, which are usually more widely applied. If asset labels contain two-dimensional codes, confirm that the device explicitly supports the corresponding code.
- Read distance:When you view parameters, distinguish between close and remote reading.
- Interfaces and Connections:Wireless equipment is often connected through USB and suitable for fixed workspaces; wireless equipment needs to check the bluetooth or wireless reception, effective working distance and matching process.
- Re-entry and anthropology:The mobile count should focus on the time of single charge availability, battery replacement, unit weight and comfort.
- Protection level:View the outer shell's dustproof, waterproof and fall resistant parameters, judged in conjunction with the risk on the ground. The parameters represent a test capability under specified conditions that is not equal to and will not be damaged in any environment.
Landing: let scanning data into the correct inventory process
Scanners usually simulate through keyboard simulations, serial or accompanying programs to the computer, and move data to the end. Prior to selection, you must confirm how the inventory system supports input, field formats and equipment compatibility requirements; if the system requires bulk import, check the prefixes in the scan results, return carcards and duplicate record-keeping rules.
Shanghai-based Selecting Tech, when combing the need for asset inventory equipment, checks a label sample, working distance, terminal type and data entry process together. The actual test is done in the order of "selecting commonly used labels - covering remote proximity and different angles - continuously scanning an asset set - checking system records", focusing on missing reading, misreading, re-logged and broken data.
Make the decision by scene: close with test results
For fixed workstations with clear tags close to the scanner, compare the interfaces and handling of wired devices first. For mobile stocktaking, tags with QR codes, or larger work areas, focus on 2D read capability, wireless connectivity, battery life, and ruggedness. Do not choose based on one specification. Run a trial with the actual tags and terminals and base the decision on read stability, data transfer, and comfort over long periods of use.

Ms. Lei
Mr. Pang