How does the fixed asset inventory cycle be determined? Frequency is based on and spacing
RFID Knowledge

How does the fixed asset inventory cycle be determined? Frequency is based on and spacing

PublishedShanghai Zejie Smart Technology Co., Ltd.

The fixed asset count is monthly, quarterly or annual depending on the value of the asset, liquidity, risk of use and difference in last count. High value, assets that are easily moved or borrowed frequently are suitable for shorter spacing; fixed location, lower value assets can reduce full inventory frequency. The practical approach is to conduct regular comprehensive inventory counts, which are checked against priority assets, and take a temporary count when people change, move or account abnormality.

Cost: How to select a full and batch count

A full inventory can be checked at a time against the booking, physical, use department and location, but it requires coordination of personnel, arrange for decommissioning or co-operation with on-site verification, and organizational costs are higher when larger. A batch count breaks assets by department, location or category, reconciles them at different times, and spreads the workload, but ensures that the batch is covered in complete form and aggregates the differences in a timely manner.

When a frequency is determined, the number of participants multiplied by the number of hours worked on the site, plus the time spent on review and processing differences. If a full monthly inventory has a clear impact on production, it can be changed to a quarterly wheel drive, with a monthly spot check of high-risk assets; if the number of assets is small and distributed centrally, the annual comprehensive inventory may be more appropriate for the event trigger count.

Effects: How the time interval of the count affects the accuracy of the accounts

The longer the interval, the more likely it is to accumulate, the more likely that assets will be transferred, maintenance, and the less registered will be possible to trace the time when differences are discovered. The shorter the interval, the problem will be easier to locate, but repeated verification will increase the workload. The difference type and change time-to-time adjustment cycle can be combined with the past count rate of discrepancies: fewer different cycles over a period and the process is stable, the lengthening interval can be assessed; the discrepancy occurs, the difference to the unknown or the recording lag, and the review cycle for the asset should be shortened.

It is proposed to divide assets into high, medium, low risk three tranches as internal management tools rather than a uniform term. High risks typically include higher unit prices, easy to carry, equipment that is regularly borrowed or affects production; medium-risk assets are checked quarterly or semi-annually; and low-risk, fixed-positioned assets can be included in the annual comprehensive inventory. The specific cycle should be based on an enterprise system, the size of the asset and the operational arrangements.

Applicable scenario: life cycle by asset characteristics

Tools for storage or production sites, which detect equipment that is frequently used across regions, can be checked on a monthly basis, and quarterly batch counts; assets with relatively fixed positions such as office furniture can be verified annually and filled when the department moves. Information equipment involving people who have received or frequently change users should be identified simultaneously at the time of receipt, return and post transfer, without waiting until the annual count.

When you comb the fixed asset management process, Shanghai Select Tech will consider the inventory arrangements together with the maintenance of the asset desk, and take the transfer and write-off approval. The inventory should at least record the asset number, name, responsible department, location, state of use and reconciliation results to ensure that the difference corresponds to the specific asset and responsibility chain.

Common pits: exceptions when the cycle is fixed

You can group up an asset risk, set a full annual inventory and monthly period, focus on a quarterly spot-check, and review the cycle once a year based on differences. If there are continuing problems, check access, transfer and write-off processes are updated in a timely manner, and decide whether to increase the number of counts.