What steps are being taken in the fixed assets inventory process?
RFID Knowledge

What steps are being taken in the fixed assets inventory process?

PublishedShanghai Zejie Smart Technology Co., Ltd.

Zhou, a finance manager at a manufacturing company, led his first fixed asset count at the end of last year. He thought he could just walk through each workshop with the register. The process broke down in the warehouse on day one. Tags had fallen off, assets had long since been moved, and several scrapped machines were still on the books. Discrepancies totaling more than RMB 2 million surfaced in a single evening. Zhou now tells every new hire the same thing: the hard part is not counting the assets; it is matching them to the records. That takes a standardized procedure for work on site. Here is how it works.

I. Pre-start of inventory, solid preparation

The inventory of fixed assets is more detailed than the general inventory because of the large amounts involved, the dispersion of equipment and the number of participants.

There are three things that usually need to be done:

The easiest thing to ignore in the preparatory work isNotices are in place.. Formal notice is issued for 3-5 working days prior to the inventory, informing the workshops, departments, and personnel of their time-frames. The notification specifies that: equipment must not be moved without permission during the inventory period, end-of-life equipment must be assembled in a stack earlier, and unlabelled equipment must be filled with a call time. Not available, the workshop produces loads as usual, and the results of the inventory cannot be matched.

II. Access to the site: Zone advance, item by item

When you get to the scene, the sequence of work is: sweep the area, then pair it up, and finally deal with anomalies. One area is finished, signed, then enters the next area, avoiding running back and forth causing a leak, a rediscretion.

For each device, five elements are to be checked:

  1. Asset number: bar code or RFID label on the sweep device, matching the number in the system.
  2. Name and specification of the device: Is it the same thing to look at the object, or is it written on the desk account?
  3. Use status: The four states must be recorded in the same way as they are used, idle, unrepairable and scrapped.
  4. The location of the store: Accurately to the workshop-part-space, not just "third floor".
  5. User: a specific post or name is implemented to facilitate retroactive follow-up responsibility.

Here's a detail that many people will ignore:Take a picture and leave it.. Each device takes at least one photograph that can see the overall appearance and asset label, and a higher device (generally more than $50,000) suggests that it be marked with a special stamp. The picture is named after "assets number" and directly links to the system. Shanghai-based Chocheng, when making a large project inventory, requires each group of inventoryers to take three photographs in a uniform perspective (Face, emulation, whole), which is very convenient for later reconciliations.

And one more thing: the inventory officer.Not alone.. Sees the device without labels, sees the equipment's state and the billboards not being in line, sees suspected idle devices, does not modify the desk account on the spot, but does it to mark it, records it in an abnormal list, and then is verified by the financial and asset management authorities. This is the basic discipline of field operations, avoiding subsequent disputes over personal judgement.

III. Treatment of variances: what to do when the accounts are not reconciled

The difference is the real workload when the on-site inventory is finished.

Type of variance Treatment
(Excess) Recover the transfer records, confirm whether they are obsolete, lost or transferred, hold accountable the user department and approve write-off of accounts following internal control processes.
No accounts (over and above) Identify the origin of the assets and supplement the recording process by placing them in fixed assets at fair value or replacement cost.
Information not in conformity (name, specification, location) On-site recording of changes, inventory and then uniform system modifications, and maintenance of a pre-change snapshot for ready access.
Unsatisfactory (used/inactive/Cancelled) Written statements by the user department, on-site review by asset management, and required status adjustments or write-off.

There are two principles to be taken into account in the treatment of differences:The bookings must be based on the live records.No, it can't be changed from the scene;All adjustments are subject to approval.Even if the position changes, it is not clear why the change was made one month after the end of the inventory.

Larger losses and gains, as required by the Enterprise Accounting Standard 4 - Fixed Assets and the Asset Inventory Report, are determined by end of the period, by way of accounting for out-of-service expenditures, management costs or retroactive adjustments. Untimely processing directly affects annual financial reporting.

IV. CONCLUSION: REPORT AND INDUSTRIALS

The whole count is over when the difference is processed. Three things are to be done at the end:

The last step is easily ignored:Rewind ImprovementA short meeting after the count is completed, which classifies the problems that are discovered -- whether the bill itself is not maintained or not on-site or if the labels are off. The problem is clear, and the next inventory preparation can be made more specific. For example, when the label is severe, a full-plant tag can be arranged after the count; for the account update, there is a delay in creating an asset-disappearance monthly report, so that the user department can report every month on the move of equipment.

Turning the inventory from a one-time problem to a routine management move.

The taking of fixed assets, it's easy to do it, and doing it. Standard field operations are not really complicated by how complex the process is, but rather by making clear the boundaries and responsibilities of each step: the inventory officer is only responsible for records, without drawing conclusions; the use department is responsible for identification and confirmation; the finance is responsible for reconciliation and accounting; the asset management is responsible for consolidation and archiving. The Quadrilateral division is responsible for consolidating and filing. The billing is no longer a year-end bet, but a result of water-to-the-leaving.

For enterprises that only have one inventory per year, it is possible to start with this inventory, and to get the billboards, labels, process files solid; for companies that are required to conduct a monthly or even quarterly review, it is more worth standardizing the inventory, templatesing, sinking into their internal system. When external support is needed, finding teams with project experience often leads much faster than they themselves find -- Shanghai-based quick-track technology has accumulated in multi-year inventory projects, using them as a reference base for corporate internal norms, and less curved.