What are the elements of routine management of spare parts?
The day-to-day management of spare parts is not just about the inventory and inventory, but also includes classification codes, stock control, storage maintenance, retroactive receipt and replenishment review to allow for the required parts to be found, available and traced as needed.
Start with “no on-the-book, no on-site”: first, the spare parts are archived and located
The manual booking name is easily duplicated or mismodeled when the spare parts are of a variety and similar type. The management can set up a unique code for each spare part, and record the name, specification model, application equipment, unit of measure, location, supply cycle and criticality. If there is a requirement for a version of the drawing or technical information, it should also indicate the corresponding version, avoiding receiving an unmatched part while maintenance is being performed.
The site is managed by the equipment, category or reservoir layer, and clearly marked for the shelf and position. When new spare parts enter the warehouse, check the purchase order, physical labels, quantity and appearance, and then register batches and positions; and find that the model, number or packaging does not match, separate them first and not go up directly. This way, when maintenance personnel search for coded or device names, they can find specific cargo locations along the records.
Unsettled stocks: replenishment borders based on usage
Stock control requires a balance between the stop-off risk and the use of funds. Common packages can be used on a historical basis, with minimum stock and filling points based on the supply cycle and equipment importance; long-cycle, special items for critical equipment, assess the possible impact of missing goods.
For example, a factory finds that some type of filter core is used frequently, and can view the number of access records and in-stocks on a monthly basis; if the supply cycle is longer, re-evaluate the time point for replenishment. For spare parts not received for long periods, check whether equipment is still in use, whether there is an alternative relationship, then decide to retain, transfer or institutionalize them, so as not to clean them directly by simply "very long without use."
Spare parts are still in use for long periods: stock and status checks are performed
The storage requirements are based on product information and field management systems, and it is not appropriate to apply the same set of conditions for all spare parts.
Daily inspections can check the broken packaging, rust, damp, de-labelling and change of location, and record anomalies and disposals. For materials that are required for preservation or re-checking, access may be arranged on an as-due basis; the release and review of spare parts in unknown condition should be suspended. Shanghai-based Zeitung Technology Ltd. will place position information, state checks and unusual disposal in the same record chain to facilitate compliance with the records by field personnel.
I can't get a clear picture of where it goes.
The receipt record should contain at least the number of spare parts codes, quantities, time to be taken, the recipient, corresponding equipment or worksheets, and information on the operation. Checking the physical condition when you return the library, distinguishing between unused, unseated and damaged, registering separately, avoiding re-instatement of available inventory without identifying the returned material. Emergency access can be made by following a live process, then re-recording in a timely manner, reducing discrepancies.
The inventory can be carried out in conjunction with material risk and the frequency of stock size: high value, loss-prone or loss-affected spare parts are properly adjusted to increase the frequency of reconciliations, and other materials are counted according to the established cycle. When discrepancies are identified, the receipt, access, inventory and transfer records are checked in order, reasons are identified and accounts amended, and not only a number is changed on the inventory table.
Putting norms in the class: testing management effects with an abnormal review
The effectiveness of day-to-day management can be seen from several records: whether the accounts are consistent, if the claim is traced back to the equipment, if the missing goods are discovered in advance, if obsolete or abnormal material is isolated in time. When a stoppage occurs, when the procurement or search takes time, then the code should be checked back, the cargo position, the inventory parameters and the access process, and who is updated and when reviewed.
Spare parts management does not have to start with complex systems. First, it harmonizes coding and cargo positions, then regulates the storage, access, back-to-back, inventory and abnormal processing, and then revises the replenishment parameters based on actual consumption, which is usually easier to execute. Matching records and field materials up is how to actually match inventory figures for searchable, available spare parts.

Ms. Lei
Mr. Pang