What are the types of fixed asset inventory scanners?
Select whether to take a fixed asset-scale sweeper, or usually to fix it in one dimension or two dimensions, wired or wireless, common scanner or handheld terminal with an operating system.
Cost: How to choose common sweeper, wireless sweeper and handheld terminal
Wire-screened.Usually, a computer is connected by cable, the equipment is simple and suitable for situations where assets are concentrated in offices or warehouses, and labels are brought to the computer on an inventory basis. Its limitations are influenced by the length of the cable, which does not allow for cross-story or side sweeps.
Wireless SweeperThe receiving equipment may be communicated to a certain extent, suitable for moving the inventory on the shelf, workshop or office area; the communication distance, the time of renewal and the interference at the site are checked when selected.Handheld TerminalUsually you can run an inventory application on the device, support on-site viewing of asset information, record status or temporary data, and be more functional, but procurement and system suitability costs are also higher. Shanghai-based & Cheeky Way Technologies can then divide equipment by "Whether to leave a computer, check on site, check off a line" instead of just comparing sweep speeds.
Effect: One-dimensional and two-dimensional scrutinizing differences
One-dimensional scaffold.Reads barcodes for a common linear bar code, which is more stable in the sweep environment, and is suitable for a list of tasks on the label.Two-dimensional scaffold.Can read two-dimensional codes such as QR codes. If asset tags use QR codes or carry a large amount of encoded information, choose a model that supports the relevant code format. Actual scanning performance also depends on tag size, print clarity, glare, dirt or damage, and scan distance. Do not rely solely on device specifications.
Applicable scene: Matching devices by the inventory environment
For offices where desks, chairs, computers, and other assets are clustered, codes are clear, and corded scanning is acceptable, consider corded 1D or 2D scanners depending on the code format. Wireless scanners or handheld terminals are more convenient in warehouses, workshops, or multistory sites where staff need to move and record scans as they go. If the network is unreliable, check offline storage, how data syncs after reconnection, and how duplicate scans are flagged before deciding whether you need a smart terminal.
Common pits: check the labels and systems, then look at parameters
Checks the existing asset labels, identifies bar code type, size and clarity; then uses a candidate device to scan the actual light, distance and angle. Then checks whether the inventory software supports the equipment, whether data can match the asset number, how the leak drive and double-check count are handled. Confirms that batteries continue, charge, interface and spare parts supply. If you read only the bar codes, you do not have to default on choosing more complex devices; if you need to check and register the status of an on-site search, then you should not just use the scanter for price decisions. When selecting the model, you check the label, the inventory process and system compatibility together, which is usually more reliable than looking at the name of the device on a single basis.

Ms. Lei
Mr. Pang