How do you operate the fixed asset sweep? Use and process of the scanner.
Point 1: Three things before the count - labels, data, people.
The core of the fixed asset sweeps is to read bar code labels on assets with a scrutinizing gun, and then aggregate data into the system to check for differences. It sounds simple, but the field rollers are often out of preparation. Set up the tags, data, people, and this whole count goes in half.
Tag: Give every asset a unique barcode or QR code tag. Apply it where it is easy to see and unlikely to wear, such as the upper-right corner of the front panel or the inside of a table leg. Print on matte synthetic paper or PET. Ordinary A4 paper will deteriorate after two months. If assets are spread across several floors or sites, use area prefixes, such as A3 for the third floor of Building A, to make assets easier to locate later.
Data: The inventory was sent a day before to an asset management system with a bill, preferably in the form of Excel or CSV, containing the asset number, name, specification, place of deposit, custodian, original value. If the account itself is missing, the result of the cleanup is inevitable, so we clean up the book in a round.
PersonnelAt least two persons, one person to code, one person to review, avoid leakage and repeat sweeps. Large enterprises are counted across the plant area in parallel by regional grouping, which can compress their activities for days to half a day.
Point 2: The choice of a pair of scaffolds is more important than I thought.
The scaffold isn't as expensive as possible. The key is to match your use scene.
- Warehouse shelf class countCloseness, clear labels, common laser scaffolds are enough for several hundred dollars and read a dimension bar code (the most common black and white vertical stripes).
- Office equipment inventory: For computers, printers, and furniture, use a 2D scanner. Many asset tags use QR codes because 1D barcodes do not hold enough data.
- Large equipment or outdoor assetsFor example, machine-beds, vehicles, outdoor meters, which may be more than 1 m, long view or bluetooth-based wireless sweepers, and long-range identification by easy mobility.
If you have thousands of asset sizes, it is recommended that the scrutinizer (known as a batch counter) be loaded directly on and then stored in the machine, then then the data is stored in the office and then integrated into the system, without having to carry the laptop around. When Shanghai does its project for clients, it asks first about the number and distribution of assets, then recommends the corresponding model, so as not to buy back.
Point 3: Standard process for site sweep
Follow the following order, and it's almost non-existent:
- Arrival area(b) Scanning the regional code, if any, at the entrance to the region or in front of the first asset, which is equivalent to a point of departure for the card entry.
- Scan by Case: When each asset is labelled, the swipe gun is 5 to 15 centimetres away from the tag, press the trigger and hears a drip.
- Abnormal TagsIf the tags are not scanned or broken, take a picture of the location and appearance with your mobile phone and then deal with it separately.
- On-site check: To clear a region and go back quickly, to confirm that there are no big ones left out.
The entire workflow takes about five to ten seconds per asset. An experienced operator can scan 200–300 items an hour. Two people working together can finish 500 assets in half a day.
Element 4: Data reconciliation and processing of discrepancies after cleanup
The only thing that is done is half the time, and it's the reconciliation that is sent back to the system.
The system automatically compares the two types of anomalies: "Accounted but not cleaned up on site", "Scanning on site but not on account". The average difference is within 1%, and over 3% is reviewed back.
- Assets were scrapped or disposed of, but the desk accounts were not updated in a timely manner.
- Cross-sectional redeployment of assets, without the original custodian informing the financial statements.
- Newly acquired assets were not promptly accounted for.
- The tags are dropped or masked, resulting in a leak.
Each difference must be stated and processed, without ambiguity. After processing, adjustments are made in the system to allow real and physical alignment of the book.
Element 5: How the inventory report will be useful
The report is not a flood of water, but focuses on three types of information:
- Inventory Overview: time of inventory start-up and start-up, participants, total assets, success rate of scanning.
- List of variancesDetails of assets not accounted for in the actual quantities, including numbering, name, type of variance (over/under), cause and result of disposal.
- Suggested improvementsFor example, the regional label is severe and it is recommended to be carved or nailed; the sector is frequently allocated and additional approvals are proposed.
The report is completed and copied to the finance, use and management departments so that information can be synchronized with those who need it.
A little lesson.
The fixed asset sweep inventory is itself a familiar thing, first time it gets in trouble, then tags, processes, templates are set down, and every time the subsequent inventory is copied, it's recommended that at least once a year, a full inventory be made, with a sample of large businesses. The actual asset data are audited, depreciation is made, and significant communication costs are saved when assets are redeployed.

Ms. Lei
Mr. Pang