News
Focusing on the progress of smart identification and industry digitization, sharing product technologies, industry trends and business dynamics.
Update
3144 articles- RFID Knowledge
How do you read the rfid tag: Readers, Industrial Handhelds and Cellular Modes
Open: Three routes, looking at your scenes first, in the RFID project, "What to read" is often the first issue to be filmed. Fixed readers, industrial handhelds, mobile phones, NFC or ultra-high frequency (UHF), three routes have a suitable set of scenes that cannot be simply described as better.
- RFID Knowledge
Is the rfid tag safe from theft?
The RFID tags are protected against theft, but only if the system is deployed. The essence of RFID's piracy is not "it will call itself," but rather an antenna at the exit that reads a "uncollected bill" label triggers alarm.
- RFID Knowledge
Technical rfid label reliability under harsh conditions requires a decomposition statement
The reliability of the technical RFID labels in a harsh condition depends on three things: the strength of the chip to connect to the antenna, the tolerance range of the sealed material, and the overall level of protection. Read-and-read distance is not significant. The real test is whether the labels are stablely identified under complex stress such as high temperature, metal, acid, vibration etc.
- RFID Knowledge
How to assess the technical services, customization and delivery capacity of the rfid labeler in Shanghai
When choosing a RFID labeler, many people are stuck at the "Who?": whether to go to big factories or to custom-made small and medium plants? On cheap or technical services? The criteria are not complicated -- see how much of your project is standard work and what percentage of it must be customized.
- RFID Knowledge
Application of flexible anti-metal rfid labels, installation and selected care
The most common question is: can't you read the RFID tag on the metal? For the first time many people have been exposed to the soft anti-metal RFID label, and the first reaction is "can't RFID not stick with the metal?" -- that impression is not bad.
- RFID Knowledge
Tray rfid electronic tag selection and cargo flow data acquisition program
Many people think that RFID electronics are similar, and can read it with one or more of these, but the label on the tray is to hold forklift crushes, fork bumps, condensed water, cold heat alternations, and be identified in a dense stack. The selection is not in place, and the data on cargo flow is empty.
- RFID Knowledge
How to assess the selection and continuation of rfid source electronic label module
Where should we start with assessing the source RFID label selection and re-launch? First, we put out three answers: the selected one looks at three things - frequency/agreements, interfaces and sealing, launch power and reception sensitivity; the renewal looks at the ratio of battery capacity to working currents, then calculates real life in conjunction with actual launch cycles.
- RFID Knowledge
Classification of rfid labels: by frequency band, mode of power supply and cover form
Conclusion: RFID labels do not have the "best" classification, but only the one that is best suited to the scene, and the most profound feeling of exposure in these years is that the first question that clients ask is which labels are best, but it's really up to the point of success, whether or not the frequency, power supply and cover patterns of the labels can match the specific scene.
- RFID Knowledge
Distinction resolution of nfc labels and rfid tags: frequency band differences and selection application recommendations
Many people think that NFC and RFID are different, but they're the opposite of the relationship, and many people first come across these two terms as parallel technologies.
- RFID Knowledge
rfid label selection guide: frequency band, material, process and situational relevance resolution
First, the conclusion: there is no "one size fits all" label, only the core of the "right" label RFID tag selection is to align the four things that are in your actual use.
- RFID Knowledge
NFC technology panorama resolution: from near-field communication principles to smart tag applications
The key to choosing whether NFC labels are close-to-interactive, battery free and replicability resistant is the need for a close-to-reach, cell-free, and replicability; choice of labels depends on storage capacity, reading/writing distance, metal environment, and useful life. The central advantage of NFC is 13.56 MHz communications, which are suitable for connecting physical items with mobile phones, door closures, and equipment management.
- RFID Knowledge
What's a nfc card?
What is a NFC card? First, it is a non-contact smart card working at 13.56 MHz high frequency, with reading and writing distance usually within 10 cm to power the metamagnetic field from a reader and transmits data.
- RFID Knowledge
nfc reader selection resolution: interface, power matching application
The choice of low-cost readers or high power, networked devices is not critical to the larger the parameters, but whether the label type, reading distance, interface, power supply conditions and co-productions match. Short-range single card identification gives priority to USB or UART; fixed equipment, metal environment and multilabel access are focused on checking antennas, radio power and intervention resistance.
- RFID Knowledge
nfcChip Total Parsing: Mainstream Model versus Selected Parameters
The selection of NFC chips cannot be limited to storage capacity: protocol type, reading-and-writing distance, antenna size, security capability and volume consistency are more critical. General information labels can be accessed from Type 2; Type 4 should be evaluated when large capacity or safe interaction is required; remote reading allows viewing of Type 5.
- RFID Knowledge
nfc tag common type and bulk procurement element resolution
The most easy place for NFC Tag to buy mass is to compare the "looks like label" as a product. Chip sizes vary, protocols differ, and seals vary, and compatibility and stability on a mobile phone or card reader can vary several slots.
- RFID Knowledge
nfc Technical options against metal labels and selected elements
The metal environment should give priority to the anti-metal structure with a magnetic compartment; non-metallic surfaces can select general labels, and costs and thickness are usually more manageable.
- RFID Knowledge
Application selection for nfc handheld in the inspection and inventory scene
The focus of the judgement on whether to "select a NFC handheld or a barcoded handheld" is not to read a single item of speed, but rather whether the label needs to be free of contact, if there is a mask, an inventory distance, data return and field protection requirements. The inspection tends to leave a mark on stable identification and process, while the count is selected in conjunction with label costs, reading range and missing review.
- RFID Knowledge
How is the equipment spare parts management programme prepared? Configuration and processes
The core of the equipment spare parts management programme is "the availability, non-possession and availability of the stock". The programme is usually organized in four blocks: the classification and coding of spare parts, stock quotas, the procurement supply process, and the management of the storage.
- RFID Knowledge
Elements of structure and mass application for nfc stickers
The NFC sticker is essentially a sandwich structure, and understands that the bulk application after the tier is followed by a large batch of the NFC sticker looks like a thin label, which actually consists of chips, antennas, three layers of base, with optional back-flips and surfaces.
- RFID Knowledge
What are the elements of routine management of spare parts?
The day-to-day management of spare parts is not just about the inventory and inventory, but also includes classification codes, stock control, storage maintenance, retroactive receipt and replenishment review to allow for the required parts to be found, available and traced as needed.

Ms. Lei
Mr. Pang