Application selection for nfc handheld in the inspection and inventory scene
RFID Knowledge

Application selection for nfc handheld in the inspection and inventory scene

PublishedShanghai Zejie Smart Technology Co., Ltd.

The focus of the judgement on whether to "select a NFC handheld or a barcoded handheld" is not to read a single item of speed, but rather whether the label needs to be free of contact, if there is a mask, an inventory distance, data return and field protection requirements. The inspection tends to leave a mark on stable identification and process, while the count is selected in conjunction with label costs, reading range and missing review.

Cost: Not to compare only the handheld purchase price

The cost of NFC handheld machines consists of equipment, labels, management software, communication and maintenance. The NFC's commonly used 13.56 MHz bands, which meet ISO/IEC 14443:2018 or ISO/IEC 15693:2018 labels, confirm the handheld support protocol before procurement, read distance and write permissions. The labels for barcoded schemes are usually easier to print but need to be kept clean in mirrors and visible in direction; the NFC labels may be more expensive, but reduce re-labeling and manual alignment.

Compare total costs over three years: device quantity × unit price + tag quantity × unit price + software and integration fees + batteries, repairs, and replacements. Suppose you count 800 items a day and handle each twice. If barcode users have to find a visible tag each time but NFC reads once the device is close, account for time per operation, number of rechecks, and time to enter missed reads, rather than comparing tag purchase prices alone.

Comparative NFC handheld Barcode handheld
Tab Input Need to procure compatible NFC labels, some tags support writing Print labels are available, and the production methods are more flexible
Operation on the ground Read by approaching the label, suitable for placement in a position that is not easily visible We need a camera or a scan to match the bar code.
Batch count Usually need to read in a piece by piece, and multi-label reading is supported depending on the device and protocol Usually, they scan each case, and some of the equipment supports continuous scanning.
Maintenance focus Focus on tags falling, chip damage, protocol compatibility and write permissions Focus on stains, reflections, wrinkles and print clarity

Effects: Inspections are retroactive, and efficiency and accuracy are measured

The inspection scene is more focused on "Man, Device, Time, Location, Results". It is possible to match the device numbering with NFC labels, read the tag after the inspector has reached the point, recorded the value, the photo and abnormality. It is recommended that at least the application layer record the tag UID, operator, device number, time stamp, position information and processing status; the NFC standard itself is responsible for close communications, cannot replace backstage permission, log and business validation.

The inventory scene is to distinguish between a single-size check and a batch count. In the individual check, the NFC reduces the handheld ' s actions against the bar code; when multiple labels are close, the shelf still has to be designed to read confirmation, repeat to read filters and missing hints. The actual process can be set as "Reading labels - Showing material and number of books - Recording the volume of the disk - Submit differences - Second Reviews " , avoiding changing inventories on the basis of one reading.

The reading effects are influenced by label material, installation position, equipment antenna and distance. NFC works at a frequency of 13.56 MHz; ISO/IEC 14443 is usually used for close-range card type applications, ISO/IEC 15693 for high-frequency tags with long read-distance applications, but the specific distance cannot be removed from the antenna, the size of the label and the field environment directly applied. The selection test should cover at least the metal surface, near liquid, plastic casings, gloves operation and weak web environment, and record success rates, average length of operation and missing number.

Applicable scene: task-based selection of equipment

Patrol points are dense and labels are not easy to look at

Inside the cabinet, side-section of room equipment, position such as a toolbox compartment, labels may be masked or inappropriate for printing large size bar codes. The NFC handheld can use "to-point reading" as part of the check-up, reducing error-checking. Equipment recommends IP protection, drop resistance, and replacement of batteries and offline caches; the level should be confirmed by field dust, spray and drop risk tests, and it is not appropriate to look at propaganda parameters alone.

Warehouse count is large, labels are visible.

If the overpacking of goods is flat, bar code location is uniform, light is stable, barcode handhelds are often more easily deployed. If an inventory is made for fixed assets, tools, instruments or high-value items, and requires a physical tie to the asset file, the NFC is better suited to carry identification. Two ways can be used in parallel: NFC for unique identity and key node confirmation, bar code for outside boxes, batch or fast entry.

Network instability or fragmentation of operations

Handheld should support offline task packages, stop-and-run and local operations logs. One of the performance indicators is: A break-up can still perform not less than one shift, a reboot, automatic upload, and a reminder for duplicate submission, time conflict, and unuploading. This indicator is an agreed project, not a NFC protocol hand-held capability, which needs to be independently validated in a software test.

When Shanghai Selecting Tech Ltd. does this sort of combo, it usually checks the inspection forms, asset desk accounts, tag coding rules and equipment management in the same flow chart to determine what business results are to be made after reading labels, then decides to use NFC, bar code or both to avoid the system not being able to receive key fields until the device is bought back.

Common pits: reading is not as good as being useful.

Landing proposal: small-scale testing before configuration

The following four steps can be taken: Select 20 to 50 real points or assets; test the general environment, metal surfaces, shielding and weak net status; record the success rate of continuous reading, single-part operation, missing read and duplicate; use the NFC individually, using bar code or mixed numbers, based on a three-year total cost decision. The inspection is focused on identification and process marks, the count is re-examined for mass efficiency and differences, and equipment selection should be built around these two results.

If labels need to be read free of contact, the location is not visible and the system requires that each operation binds a specific asset, the NFC handheld is more targeted; if the label is large, the location is uniform, the budget focuses more on printing and replacement facilities, and bar-code options can be compared; when field missions include both asset recognition and off-site inventory, it is usually easier for NFC and bar-code combinations to balance accuracy with operational efficiency.