RFID Knowledge
(b) View the latest RFID knowledge content and learn about relevant technological advances, industry trends and application practices.
RFID Knowledge
1875 articles- RFID Knowledge
How do you apply the rfid frequency technology?
Many people think that RFID can be identified by putting a label on it and opening the reader. The actual effect depends on frequency bands, labels and objects, antenna setting, power control and the field electromagnetic environment.
- RFID Knowledge
How do you judge the rfid printer? Label specification and print accuracy resolution
A Returned Printer and Two Costs We Overlooked. Last year I helped a friend who warehouses auto parts look into a return. The print position on his RFID tag printer was consistently about 3 mm off from the chip antenna. It seemed minor, but once the tags were on reusable bins, the reader missed 40% of them. Switching printers finally resolved it.
- RFID Knowledge
What parts of the rfid device system are in place, whole composition and analysis of selected thinking
A complete RFID system is usually divided into four layers: electronic tags (Tag), readers (Reader), antennas (Antenna), and backstage software and intermediates. Together with the transmission networks and power systems that connect all layers, we often call RFID equipment.
- RFID Knowledge
Portable rfid printers suitable for which sites, re-carrying and label specifications
The core application of portable RFID printers is the site where "screw and print" labels are required - warehouse receipt, municipal power inspection, large engineering material marking, temporary exhibition asset labelling.
- RFID Knowledge
Handheld pda is different from Andre's phone, configuration selection and industry adaptation
What difference does it make between a handheld PDA and an Android phone? Although both the handheld PDA (Personal Digital Assistant, Personal Digital Assistant) and Anjo mobile phones run the Android system, they are completely different in location, design logic, and use.
- RFID Knowledge
How do you select the uhf handheld?
Many understand the “UHF handheld” as being more frequent and more powerful than possible, with actual selections to see whether the frequency band is in compliance and then overlay distance, building environment, call numbers and equipment durability.
- RFID Knowledge
What difference does it make between handheld terminals and handhelds? Model selection and configuration resolution.
A short answer: In most trades, the term "handheld terminal" and "handheld" refers to the same type of equipment – Industrial Data Collection Terminal (PDA). The two terms are often used in a mix, mainly in customary terms, without any difference as to their nature.
- RFID Knowledge
Type of handheld terminal equipment, parameter configuration and procurement acceptance resolution
First, there are three categories of use-based scenarios, with no rush to look at the parameters. Hand-held terminals are many in a way that can be described by operating system, morphologically, functionally. We are more accustomed to projecting in three categories, which is the first step in an opting-out pattern and a prerequisite for clear procurement lists.
- RFID Knowledge
Handheld pda is what, main type and industrial application scene resolution
In the face of the “selection of ordinary mobile phones, industrial PDAs or RFID hand-held terminals”, the focus is not on appearance but rather on swipe distances, network environments, protection levels, hours of continuous work and system interfaces.
- RFID Knowledge
What form of rfid handheld terminals is, and the manufacturer assesses and selects the dimensions
RFID handhelds fall into roughly five form factors: gun-style readers with a grip and trigger, phone-style handhelds with a consumer design, rugged industrial PDAs, tablet-style terminals, and wearables or modular read heads. Form factor determines grip, space for the battery, and suitable applications. Define the use case before matching it to supplier capabilities instead of focusing on the brand.
- RFID Knowledge
Rfid's handheld is far from perceptible, and antenna power and environmental impact are analysed
The handheld parameter table says "as far as 10 meters", and it is often only stable to read between 3 and 6 metres in a warehouse. This gap is not about the equipment shrinking, but about the distance that never determines a single parameter.
- RFID Knowledge
What are the requirements for an industrial rfid reader, protection level and resistance resolution?
The biggest gap between an industrial RFID reader and a normal writer is not the distance, but whether it can hold up to the field. The core requirements can be summarized as three: sufficiently high IP protection levels, wide-temperature tolerance, and mechanical reliability against vibrational shocks.
- RFID Knowledge
How much is the rfid hand-held terminal?
The RFID holds terminals ranging from several thousand to tens of thousands, and the buyers are often struggling with "buy cheap or expensive" but "can this configuration hold up their own use?" The test is based on four variables: frequency bands, reading-writing distance, protection grade, and the cost of software system integration.
- RFID Knowledge
What forms of rfid mobile readers, how to install and apply points
Element 1: First, the three types of device to be separated - handheld terminals, tablet/cell phone overlays, embedded module RFID mobile readers (also known as portable readers) are generally those that are not fixed to work and are carried by people around.
- RFID Knowledge
Fixed rfid reader installation specifications, antenna layout and contour circumventor elements
The Shanghai Alternatives Project team adapted the URF RFID in a tri-logistics warehouse in Jiangsu last winter: four alleys each have a fixed reader and four-mouth antenna that should be covered by design, while the failure rate on the line is over 8%. The two days of screening revealed that the problem was not with the readers themselves, but rather with the adjacent antennas reading at the same time, overlapping over the area, and the label response to the crash.
- RFID Knowledge
Industrial rfid reader selection guide, points for channel number and frequency band configuration
The industrial RFID reader type, the number of channels and frequency band configurations are two parameters that can be easily ignored but have a significant impact on subsequent use. The frequency band determines the type of penetrating, anti-disruption and fit label, and the number of channels (i.e. the number of antenna ports that read and write at the same time) directly determines the coverage and failure rate of the area.
- RFID Knowledge
How much for rfid set, configuration and overall cost elements
What exactly is a RFID system made up of?
- RFID Knowledge
How much is the end price range for rfid, configuration and analysis of the main points of procurement volume
Handheld RFID terminals span a wide price range. Entry-level units start a little above RMB 1,000, while industrial-grade models generally cost more than RMB 10,000.
- RFID Knowledge
How does a handheld rfid read and write understand?
Assesses the readability of hand-held RFID readers, with three sets of parameters at core: reading distance, read rate (readable labels per second), and group reading and distribution. The key to determining whether data are credible is that test conditions - standard tags, fixed launch power, empty or controlled environments - are not possible. How each parameter is measured, read, and how, is it untraceed?
- RFID Knowledge
How do rfid handheld terminal manufacturers look at self-study capabilities and service networks?
Last week, at a customer site that was used as a car storage, they had just replaced a shipment of RFID handheld terminals (a device that automatically identifies electronic labeled items within metres), and the inventory efficiency did come up, but the procurement engineer initiated the selection process: seven or eight manufacturers were compared before and after, and the programme looked like it, and the gap was not small until it landed.

Ms. Lei
Mr. Pang