How do you judge the rfid printer? Label specification and print accuracy resolution
RFID Knowledge

How do you judge the rfid printer? Label specification and print accuracy resolution

PublishedShanghai Zejie Smart Technology Co., Ltd.

Two unsolved bills behind a printer's return.

Last year I helped a friend who warehouses auto parts look into a return. The print position on his RFID tag printer was consistently about 3 mm off from the chip antenna. It seemed minor, but once the tags were on reusable bins, the reader missed 40% of them. Switching printers finally resolved it. The original selection failed to account for both tag specifications and print accuracy.

The difference between RFID printers and regular bar-code printers is that, while printing bar code or text, it also has to write data into the chip (equivalent to a "electronic ID" of the label) in the label, and the print position must be aligned with the chip antenna. There's a mistake at both links, the tag comes out of the sticker. So when you select the type, you can't just look at the printer's brand and price, the label specification and the print accuracy are the key to determining whether it works.

First, look at the label: chip, size, antenna position. Make sure the printer can "feat."

The RFID labels vary from one industry to another, but several core parameters must be identified before they are selected.

Chip Type and ProtocolCommon is ISO 14443A (HF 13.56 MHz, suitable for close identification, such as payment cards, books) and ISO 18000-6C/EPC Class 1 Gen 2 (UHF 860-960 MHz, suitable for long-range mass reading, such as warehouse, logistics). The former usually has a read-written distance of less than 10 centimetres, the latter can reach 3-10 metres or more. Printers need to see which label you write, and modules match.

Tag Size and Inlay PositionInlay is an antenna model that is embedded in the label, and has dimensions ranging from 30 mmx30mm to 100mmx50mm. Printed content must be outside of Inlay, usually leaving a margin of at least 2-3 mm. If the label itself is only 30 mm wide, Inlay has 20 mm, it is very narrow for printing space, and the machine must support the tension control of small size labels, otherwise it can run off on paper.

Base and surface materialsPET (polymer film) is more inclusive, suitable for industrial conditions; paper is cheap but susceptible to tide and is used in the outdoors or in cold storage. Printing also has a choice -- hot sensitivity is to heat paper with printed hair, which is coloured without carbon belts, but easily fades; thermal printing is by graft, which is printed on ink, which is more durability. RFID labels are usually printed in heat because the data written on the chip requires a long-term label.

We did a costume business project, and the client started with paper chandeliers, and the store was wet, the label was so hot, the head was so bad. And then we changed to PET, the heat printout, and the reading and writing rate was over 99.5% after a year of arrival.

Read print accuracy: 203 dpi is enough to determine the complexity of printing

The accuracy of the print is usually measured by dpi (dots per inch, or points per inch), and most commonly there are 203dpi, 300dpi, 600dpi. The higher the dpi, the more the point can be struck in a unit area, the more fine the words and the drawings, but the cost and the speed of printing will also be affected.

203dpiis the industry's entry-level resolution, at about eight dots per millimeter. It is sufficient for linear barcodes such as Code 128 but struggles with QR codes using 0.25 mm minimum modules and very small characters. It suits tags more than 50 mm wide with standard barcode sizes and simple print content, such as shipping carton labels.

300dpiIt's about 12 points per millimeter, and it clearly strikes two-dimensional modules as small as 0.2 mm. The RFID label often requires simultaneous bar code, two-dimensional code, three sets of text information, 300dpi being a more balanced option in most scenarios. Under the same conditions, it costs about 30% more than 203 dpi, 10-15% slower.

600dpiIt's mainly for precision, e.g. electronics, medicine vials, about 24 points per millimetre. The RFID scene is not used much, unless you have to line up high-resolution Logo and micro-series numbers on a 25 mm square label.

I'm not sure if you're going to be able to do that.Print Location PrecisionIt's also critical. This is a location deviation for each drop point of the header, which is generally between ± 0.2 mm and ± 0.5 mm. The difference is as low as possible in line with Inlay ' s position. The selection suggests that suppliers provide real data and require that they include a tolerance deviation in their contract.

Some of the machines also have RFID calibration tools, automatically detecting Inlay positions on startup, feedback print deviations to user interfaces, and saves manual cross-references. This is a very practical feature in bulk production, which can push waste rates from 3% to less than 0.5%.

The pits that are easily stepped on at the scene: labels fluctuate, reading and writing are missing

The selection phase is clear, and it's possible to flip over at the scene. Two pits are most common.

The first pit is a label that doesn't match.. Inlay position can vary by 1–2 mm between batches, particularly when orders come from different suppliers. Tags that print correctly today could show widespread misalignment tomorrow. Specify tolerances in the contract, such as ±1 mm for the inlay center position, and require an inspection report with each batch. If a batch has no report, test-print samples before putting it into production.

The second pit is a lack of reading and writing.. Many of the RFID printers are only responsible for writing, and there is no automatic validation after writing. They are not read on the product until they are posted downstream, and they return to work in bulk. A qualified machine should read the chip while printing, confirm that the data is written successfully and verify the print location. When Shanghai-based RFID Ltd. recommends a program for customers, it usually proposes to add this checkout as a hard indicator for equipment acceptance, rather than discovering that data is empty afterwards.

There are also small problems that can be ignored: matching carbon bands (thermal tatters). Carbon belts, hybrids, resin-based types, the most durable, industrially viable; wax-baseds are cheap but easy to grind. With the wrong carbon belts, labels are just clear and they're broken in a few days. The RFID labels are read over and over again, and it is recommended to start from the resin base.

Selective end: three tables to put decision-making on paper

Compress the aforementioned into three lists so that the selection is not carried by sales.

If the supplier is willing to sign these three forms and give them, it is probably more cooperative; if you don't talk about the price, you can look at two more. The cost of a single RFID label is not low, and once the scrap is printed out in bulk, the loss is often one out of every amount of equipment saved.