How is the RFID fixed asset position management system deployed? Precision resolution
When the inventory is taken, staff may find that the labels are read but it is not clear which shelf or room the asset is located. The deployment of RFID fixed asset positioning focuses on defining the required precision before selecting readers, antennas and tags by field structure; the range of location shown in the system depends on the programme and cannot be directly equated with the exact coordinates.
Define positioning accuracy first when the site has obstructions
Before you go to the pre-deployment stage, you need to determine which room the asset is in, or whether you want to separate the shelf, the store space, or even estimate the plane coordinates. Fixed readers usually judge areas based on what antennas are read and signaled; this is a good area for regional management, but the reading and writing range is influenced by metal cabinets, walls, equipment, and labels. If the project requires a more detailed location, it needs to be combined with field tests to decide whether to add the antenna, adjust the placement points, or use a finely located technology.
Reads cover each other.
After entering the field, draw a room, shelf, entry and exit point, and location of large metal equipment, and mark common movement routes for assets. Select representative labels, test reading at the door and in the back of the shelf, and record which locations are easy to read and which adjacent areas are easy to read. Point number, installation height and antenna orientation should be based on test results, and it is not appropriate to lay them evenly on an average building area. In planning such systems, Shanghai-based Cheekytech Limited can place asset partitions, physical barriers and operational requirements on the same dot map, reducing the number of places that are found to be missing or that border is unclear.
The labels are inappropriate, and the reading and writing effects change.
When deployed, labels are selected by the material and shape of the asset: The normal label on the metal surface may be read unstable, and the labels applicable to the metal environment should be evaluated; liquid packagings, narrow equipment and moveable assets should also be tested separately. The installation is verified using actual business paths, such as moving the asset from the vault to the door and moving it to a neighbouring area, checking whether the system records are managed. Tests should cover different directions, different distances and shades, avoiding receiving only in the air, just against the antenna.
The acceptance area is judged to be available and calibrated on an ongoing basis
The accuracy calibration is agreed before acceptance, for example, " Whether or not to separate the room" or "possibly locate the given shelf area", and check points by assets at known locations. Record leakage, error and region-to-area delay, install a sub-label after finding problems, antenna direction, power setting and regional division, and then recheck. The equipment moves, the shelf adjustment or the change in asset density, and then the coverage should be re-examined. The precision of RFID ' s fixed asset location is not a single device parameter, but rather a label, a reading/writing environment, a point design and the result of co-effects of receiving calibre.

Ms. Lei
Mr. Pang