How is the RFID fixed asset inventory system deployed? Implementation step resolution
Most of the projects are suitable for a combination of “fixed spot capture + hand-held patches”: first asset coding and field testing, then sector deployment, test operation, acceptance, and avoiding large-scale procurement from the outset.
Cost: Handheld, fixed and combined deployment options
The costs of the RFID fixed asset inventory system are usually composed of labels, reading and writing devices, software interfaces, network adaptation and implementation services. The number of labels is easily estimated, and what is really over-budgeted is where the equipment is installed, the metallic or liquid environment fit, and the data interface with existing asset management systems.
| Deployment pattern | Suitable | Cost component | Implementation focus |
|---|---|---|---|
| Handheld Count | Asset dispersion, larger floors and frequent changes in inventory routes | Handheld terminals, labels, software authorizations and staff training | Planning of routes, control of leakages and treatment of barriers |
| Fixed collection | Fixed access points, high movement of assets and the need for automatic recording of incoming and outgoings | Fixed reading and writing, antennas, construction of restricted areas and network power | Control the reading range and reduce error in the vicinity |
| Portfolio deployment | It takes a periodic inventory and manages the in- and out of assets. | Fixed spot and handheld terminal parallel | Harmonized label coding, privileges and inventory rules |
The budget measure allows for the split of “Assets x Label unit price plus Regional Equipment + Unit cost of implementation and interface costs”. The label is not to be purchased only in terms of existing assets, but may set aside a provision of approximately 5-10 per cent based on new assets and damage replacement requirements; this proportion is a reference to the project budget and needs to be adjusted for changes in assets and for the durability of the label, not industry statistics.
When Shanghai-based Selecting Tech Ltd. designs the program, it usually detachs the purchase into a test, pilot and expands three stages. This allows for first verification of the recognition of different materials such as labels on metal cabinets, machine room equipment, office furniture, and then decides whether to increase fixed reading and writing points and reduce the risk of one-time input selection.
Effects: Whether the system is able to inventory assets depends on data and on field rules
RFID can only identify labels and cannot automatically judge whether the asset is accounted for. To achieve its usable effect, the system requires that the owner data, tag encoding, location, responsible person, inventory status and cause of anomalies be matched. The inventory results should at least distinguish between " Accumulated, not arrived, an abnormal location, read again, to be verified " .
Implementation step I: Inventory of asset master data
The old asset desk account, the unified asset number, name, specification, use department, responsible person, place of deposit and status of assets are exported before you go online. Repeating numbers, empty locations and undiscounted data are shown separately and not appropriate for direct tagging. It is recommended to extract an area for data cleansing, confirm fields and then import lots.
Implementation step two: on-site survey and tagging
The label paste should avoid large areas of metal and strong cover areas; the metal asset uses a label for suitable metal surfaces, and normal paper labels do not necessarily achieve the same recognition.
The test records should contain the equipment model, label type, location, distance, angle and result as a basis for subsequent acceptance.
Implementation step three: code and operating rules
Creates non-repeated tag codes for each asset, and binds them to the number of the asset. The inventory rules are determined in advance, e.g. if the assets are recorded as " anomalous" after they leave their original location or enter "to be redeployed"; loaned, maintained, whether the end-of-life and storage assets are included in this inventory, and also establish clear conditions in the system.
Implementation step IV: Zone installation and system interface
Fixed-form equipment should be installed in the required route of assets, rather than simply averaged by room number. Handheld counts are configured to a list of areas, inventory routes and default alarms. The system interface is at least checked for new assets, redeployments, end-of-life, changes by responsible persons and results of inventories; the interface failed to keep an error record, so that " synchronized completion " cannot be shown.
Implementation step V: pilot, training and acceptance
It is recommended that a regional pilot of more types of assets, which managers are familiar with. After the pilot is completed, the results are compared to system results by manual random check, and are separately omitted, misread, mislabelled and duplicated. The acceptance indicators should be determined according to the asset mass and inventory counting in the test area, and it is not appropriate to directly apply other project data.
The training includes not only equipment switches, but also label subsidies, abnormal registrations, offline inventories, data uploading and review of the results. The system supports local temporary storage when the network is unstable, restores connection before uploading, and displays upload time and failure records.
Applicable scenario: different asset environments require different deployment combinations
The assets in the office building, such as computers, tables and chairs, and file cabinets, are usually suitable for hand-held inventories.
The storage area, the tool room and the equipment entry/exit is more suitable for a combination of deployment. The channel is fixed, and when assets are in or out of the facility, you can set a fixed reading point at the entrance; and when the vault is under close or cover, you can supplement the inventory with hand-held terminals. Fixed points record the flow, and hand-held devices verify the stock and location.
The server cabinet, metal instruments and dense cables affect label recognition, tag location, label type and reading angles. For assets of higher value or not allowed to move at will, they should be combined with manual review and permission records, which cannot rely on automatic reading results.
If the number of assets is small and location changes not very frequently, it may not be cost-effective to directly build a large number of fixed equipment. You can use tags and handheld devices, so as to count the frequency, and then you can add fixed collection points to the HF access point after the movement of assets and unusual types have stabilized.
Common pits: equipment purchased, projects still not working
- Read only distance, not field material:Read distance is affected by labels, antenna orientation, asset material, shielding and environmental disturbance.
- Import old desk accounts directly:The duplicate numbering, error location and historical end-of-life data in the desk account are brought into the system.
- The tag is all over and the deployment is complete:The label will also be tied to the asset number and confirmed by a disk.
- Installation of fixtures:The multiple-point reading ranges overlap, which may lead to misreading of the neighbourhood.
- Ignore offline scenes:Handheld terminals should support offline preservation, time recording and back-up verification.
- Only equipment, no business processes:The equipment is not representative of the correct processing of asset transfers, end-of-life and inventory differences.
The deployment of the RFID fixed asset inventory system can be carried out in the order of data cleansing, field testing, small-scale piloting, zoning expansion, continuous review. The player is holding or fixed, depending on whether assets are centralized, access is fixed, and the frequency of the count and the site cover. First, the test results determine the labels and equipment, then the size of the construction is determined, usually more secure than purchasing them directly by the number of assets.

Ms. Lei
Mr. Pang