How does the RFID Asset Positioning Management System choose?
RFID Knowledge

How does the RFID Asset Positioning Management System choose?

PublishedShanghai Zejie Smart Technology Co., Ltd.

Last winter, a precision spare parts factory called in the middle of the night: imported gear was lost and production lines stopped for six hours. The RFID asset locator system is turning "searching" into "checking." The key is not so much more functionality, but rather positioning accuracy matching scenes, label compatible asset materials, and platforms that connect to existing systems.

The emergency call that the device couldn't find.

The phone was the plant manager Zhou. He said the package was numbered, but the same number was scattered in three different locations in the workshop, some in the tool cabinets, some by the processing centre, and several were seconded to the next branch of the factory without anyone keeping it. The inventory account was written on the warehouse, but it wasn't found at the scene, and finally the technicians were able to dump it in a pile in the corner of the warehouse.

Assets that are on the books but cannot be found are not uncommon in discrete manufacturing. Assets pass through several processes and shifts, and manual recordkeeping can easily miss a handoff. When reviewing inventory procedures for businesses, we found that the time required in such cases is often three to five times what the register would suggest, with count cycles stretching from a week to a month.

The more accurate the RFID is, the better it is.

Many clients come up and ask, "Can we get a ambivalent-level positioning?" Technically, one or two metres of precision can be achieved by the high frequency active RFID (a built-in battery, electronic tag that can launch a signal) or UWB (superbroadband, a wireless technology with very narrow pulse ranging), but costs are multiplied. Extrication is common to selection error.

There are three common levels of RFID positioning accuracy: zone level (1–5 m), for distinguishing warehouse rack or processing zones; room level (3–10 m), for locating assets across workshop floors; and high precision (0.1–1 m), for distinguishing modules within large equipment or cabinets. Zone positioning can use passive UHF tags powered by the reader's RF energy and reader antennas. A tag can cost as little as 0.20–0.30 yuan. High precision needs more exciters, fixed devices that transmit signals, or Bluetooth AoA, which derives location from the angle of arrival. The overall cost is an order of magnitude higher.

Four dimensions that cannot be bypassed in the assessment of programmes

The first consideration is whether positioning accuracy fits the application, as discussed above. The second is battery life and interference resistance. Active RFID tags generally last two to five years on a battery. Metal surfaces or liquids can significantly shorten read range. Metal assets need on-metal tags, which cost three to five times as much as ordinary tags.

The three dimensions are data interfaces. The system can move positioning data to existing ERP (Enterprise Resource Plan System), MES (Producing Implementation System) or WMS (Desk Management System). If the manufacturer provides a closed private agreement, late docking is very difficult. The platform provides standard API and database interface documents, deciding whether the system will actually be used.

The four dimensions are deployment and transportation costs. Apart from one-time procurement of tags and readers, antenna deployment, cable laying, software debugging is a hidden cost. Ten thousand square meters of workshops, the passive UHF program usually requires 20 to 40 reader antennas, each with a radius of about 5 to 8 metres. Active programs are expensive, but the antenna density can drop to one tenth.

Why don't you pick the tags and the readers?

The first step in choosing a label is to look at the material of the asset. The label on the metal case must be anti-metal, and the normal UHF label will drop from 5 m to less than 0.5 m, which is almost equivalent to being invalid. The liquid-rich environment (e.g. water treatment workshops) should choose an anti-liquid label or place it outside the container.

Check the reader frequency as well. Chinese national standard GB/T 29768-2013 defines requirements for the 800/900 MHz bands. Most UHF readers on the market operate in this range, offering a balance of read distance and penetration. If the plant has a particularly dense metal structure, fit the reader with a directional antenna to focus the signal on the required area.

The point that is often ignored is the number of times a label is written. Ordinary RFID tags usually have a writing life of over 100,000, but if business requires an update on asset status or location every day, selecting an industrial label is more stable.

The easiest point to cross at the implementation stage.

One common mistake is not surveying the site thoroughly. On one project, a provider planned 30 antennas from a drawing, only to discover on site that three load-bearing walls interfered with the RF signal and four antenna positions had to change. An RF survey beforehand can avoid about 30% in rework costs.

The second point of turn is the pacing with the existing system. There are no uniform rules for asset numbers and RFID tags on some enterprises, and the data that are read out cannot be identified by the scan. The code map is clearly stated at the selection stage, and it is best to run through the file flow during the pilot phase and spread them over large scales.

The three points of the rollover are that people are not trained in operation. The RFID positioning system is not installed automatically, assets are added, transfers are cancelled and all require a code-checking register. The training costs are usually not listed separately in the budget, with at least two weeks of adaptation time being set aside for practical operations. Shanghai-based Sieux Tech Ltd. usually delivers the project in two stages: the first for equipment managers, and the second for line team leaders.

Ask yourself a few questions before you choose the type.

Think of these questions and look at the options, it's much more efficient to communicate. The RFID asset positioning system is not about a technological stack, but about making it transparent: who's using it, where it is, how long it takes, when it's returned. Clear on these things, save time for finding something, and then it's just natural that productivity will go up.