How much is the end price range for rfid, configuration and analysis of the main points of procurement volume
RFID Knowledge

How much is the end price range for rfid, configuration and analysis of the main points of procurement volume

PublishedShanghai Zejie Smart Technology Co., Ltd.

The price range of the RFID handheld terminals is quite wide, with more than a thousand entry payments available, and the industry model is very large. Buyers who first come in contact with this type of equipment are often puzzled: can they use low prices? Where are high prices? The criteria for judging are not complicated -- first, to use the scene to read and write distance, to protect levels, to clear the needs of operating systems and frequency modules, and then to match the demand, the price ranges are clearly clear.

Price ranges: where do cost differences come from?

Based on the actual market transactions in recent years, RFID holds a total of three price segments:

Four main factors account for cost differences: chip modules (UHF costs considerably more than HF), protective housings (IP67 costs about 30%-50% more than IP54), battery capacity (prices rise noticeably at 6,000 mAh and above), and brand and after-sales support. Prices can vary widely between brands even in the same tier, so allow for reseller and brand premiums.

Configure differences: parameters determine actual use experience

Beyond the price, the real impact on the use experience is in several core configurations:

When Shanghai selects its programmes for customers, it aligns these parameters to the use scene, avoiding that the clients spend their industrial-grade money on a mid-level configuration.

Volume and method of procurement: how to calculate volume

The volume of the procurement directly affects unit prices:

The test list phase recommends that the goods be obtained from locally supported sources, and that bulk purchases be considered for direct re-entry to the manufacturer or large agent.

Application scenario: how different industries choose

The demand for RFID handheld terminals varies widely from industry to industry, and no other programme can be replicated:

Different sub-species in the same industry may vary significantly - for example, by repositioning storage, choosing cryogenic batteries in cold storage environments and selecting corrosion resistant casings in chemical compounds.

Common pits: easily ignored issues in the selection of models

In the context of practical project experience, several types of issues are easily overlooked:

  1. It's just a unit price, not protection.: Cheap equipment is in an outdoor or wet environment, with a significant increase in failure rates during the six months and higher overall costs.
  2. Ignore SDK and secondary development support: The different brands of the RFID module development interface vary widely, and pre-confirming SDK documents and illustrative code quality saves a large amount of late debugging time.
  3. Compatibility of accessoriesThe cost of long-term use varies greatly from charger to backup battery, utility of protection kits to bulk purchasing.
  4. Real Read Distance vs nominal reading distance: Maximum read range is typically measured in a lab. Tag type, interference, and battery charge often cut real-world range to 50–70% of the stated figure.
  5. Respond speed after sale: When equipment fails, local availability and the length of the refurbishment cycle directly affect business continuity.

The core idea of the selection is to first identify the key constraints (distance, protection, re-carrying, secondary development) on the use of the scene, then match the equipment in the corresponding slot, and finally combine the amount of purchases with the cost of the channel for decision-making. After these steps, the figures on the quotations are no longer isolated numbers, but rather clearly comparable solutions.