Home > Devices

I Product overview


Name: NFC handheld terminal ZJ5003
The ZJ5003 is a lightweight, ultra-thin and high-performance industrial-grade intelligent handheld terminal meticulously crafted by our company. Developed based on the Android 12 system, it is equipped with an 8-core high-performance processor. With its configuration, it runs quickly. This device is widely applicable to multiple industries and fields, such as express delivery, logistics, warehousing, manufacturing, retail, etc. It helps users rapidly achieve informatized management and improve work efficiency.

II Performance parameters


● Standard version
CPU: Cortex-A53 2.0 GHz octa-core
RAM+ROM: 3GB +32GB
Expanded memory: MicroSD (TF) card can be expanded to 128 GB
Operating system:Android 12; Support Soti MobiControl, SafeUEM, etc.

● High-end version
CPU:Cortex-A53 2.0 GHz Octa-core
RAM+ROM:4GB +64GB
Expanded memory: MicroSD (TF) card can be expanded to 128 GB
Operating system: Android 12; Support Soti MobiControl, SafeUEM, etc.

III Data communication


● Octa-core
WLAN: Support IEEE802.11 a/b/g/n/ac protocol (2.4 G/ 5 G, dual-frequency) , built-in antenna
WWAN: 2G: 900/1800 MHz
         3G: 900/1900/2000/2100MHz
         4G: TDD-LTB:B38/B39/B40/B41
                FDD-LTE:B1/B3/B5
Bluetooth: Bluetooth 4.0/5.0;BLE
GNSS: Integrated with GPS, GLONASS and Beidou; built-in antenna, support AGPS

IV physical dimension


Overall dimensions: 179 mm x 80.0 mm x 17.2 mm
Overall weight: <242 g(depends on module configuration)
Display screen: 5.7-inch IPS FHD screen with a resolution of 1440 x 720
Touch screen: Corning Gorilla Glass, supporting multi-touch, and also supporting operation with gloves or wet hands.
Battery capacity: Chargeable lithium polymer battery 4300 mAh; The battery capacity in the optional handle mode is 10,000 mAh.
Standby time: > 300 hours
Operating time: > 12 hours (depending on usage conditions and the network environment) 
Charging time: 3 hours (using the standard power adapter and data cable) 
Expanded card slots: 1 SIM card slot, one slot for either a SIM card or a TF card (selectable)
Communication interface: USB 2.0 Type-C, OTG
Audio: Speaker, 1 microphone, supporting voice calls
Keyboard: 1 power button, 2 scanning buttons, 2 volume buttons, 3 TP buttons
Sensors: Gravity sensor, proximity sensor, ambient light sensor, vibration moto

V Development environment


SDK: Terminal software development kit
Development language: Java
Development kit: Unknown

 

VI Utilization environment


Operating temperature: -20 °C to 50 °C (Low-temperature batteries can be provided optionally when the minimum order quantity is met.) 
Operating temperature: -40 °C to 70 °C
Environment humidity: 5% RH - 95% RH (no condensation) 
Falling specification: Within the operating temperature range, each of the six sides can endure the impact of falling from a height of 1.8 meters to a concrete ground for ≥ 20 times.
Rolling test: Continuously roll 1000 times, with each roll being 0.5 meters. After rolling on the six contact surfaces, it can still operate stably and meets the IEC rolling specification.
Protection rating: IP65/IP67, meeting the IEC sealing standard.
Electrostatic protection: ±15 kV air discharge, ±8 kV contact discharge

VII Other parameters


Data collection
● Camera: 
Rear camera: 13-megapixel color camera, supporting autofocus and flash.
Front camera (optional): 5-megapixel color camera.

● NFC
 Operating frequency: 13.56MHz
Protocol standard: ISO14443A/B,ISO15693,NFC-IP1,NFC-IP2, etc.
Tag standard: M1 card (s50, s70); CPU card, NFC tag, etc.
Read-write distance: 2-4cm

Barcode collection (optional configuration)
Two-dimensional scanning engine:Zebra: SE4710; Honeywell: N6603
Supported types of one-dimensional barcode: UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, 
Chinese 2 of 5, Codabar, MSI, RSS, etc.
Supported types of two-dimensional barcode: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, MicroQRcode, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, DutchPostal (KIX), etc.

Accessories
Standard configuration: Adapter, data cable, anti-drop rope, screen protector, etc.
Optional configuration: Base, sheath, etc

 

VIII Product display


NFC handheld ZJ5003 product display
NFC handheld ZJ5003 product display Figure 3

 

sales@shzjsmart.com
sales@shzjsmart.com
Back top
position 2 Shanghai Zirgy Intelligent Technology Co., Ltd. position32 Shanghai Zirgy Intelligent Technology Co., Ltd.