Ⅰ Product introduction

     The ZJ413 tag converter is a high-performance ultra-high frequency tablet interrogator. It is a high-performance desktop card writing device independently developed by Zirgy. It supports mainstream UHF RFID air interface protocols such as EPC C1G2 and ISO/IEC 18000-6C/6B. This card issuer is a professional interrogator specifically designed and developed for tag information entry. It has excellent protection performance and reading and writing performance, and can achieve automatic group writing and single writing, quickly reading and writing tags in batches. Moreover, the software provided with this interrogator can also quickly import and export Excel spreadsheets, intelligently perform automatic data entry, achieve the rapid binding and association of tags with data information, reduce cumbersome manual entry, and thus improve work efficiency.



Ⅱ Application scenarios

• Book management
• Jewellery management
• Automated settlement management
• Multi-tag issuing management

​

Ⅲ Product features

• Designed with independent intellectual property rights;
• Fully support electronic tags compliant with the UHF EPC Gen2 (ISO18000 - 6C) protocol;
• Operating frequency range

        GB：920MHz~925MHz

        GB：840MHz~845MHz

        FCC：902MHz~928MHz

        ETSI：865MHz~868MHz  (optional)

• Interface output power: 27dBm (configurabe)
• It supports the active mode, command mode, trigger mode, and password working mode.
• Card reading rate: >300 times per second.
• Read and write cards through USB communication.

​

Ⅳ Performance parameters

• Communication interface: USB2.0 (TYPE-C)

• Power supply method: Powered by USB (power capacity not less than 5W)

• Card reading distance: 0-30CM (depending on the power level and the performance of the tag)

Ⅴ Environmental parameters

•  Operating temperature -25℃~70℃

•  Storage temperature -40℃~85℃

•  Relative humidity 5% RH~95%RH(In a non-coagulated state)

•  Atmospheric pressure 86kPa~108kPa

Ⅵ Interface definiton

• TYPE-C interface: USB communication interface (power supply and USB communication)

• Definition of Indicator Lights:

• Power: The power indicator light. It remains constantly red when powered on.

• Operation: When the interrogator is in operation, the operation indicator light remains constantly red.

• Identification: When the interrogator identifies an RFID tag, the indicator light blinks blue. When it fails to identify a tag, the light remains off.

Ⅶ Physical features

• Overall dimension: 400mm x 300mm x 35mm

• Indetification area: 304 x 260mm

• Colour: black

• Materials: Aviation aluminum + Acrylic

Ⅷ Product dimension diagram