About Zirgy
[+]
sales@shzjsmart.cn
Address
3F, Building 1, 875 Qiuxing Road, Pudong New District, Shanghai
I Product introduction
Name: Ultra-high frequency card issuer ZJ402
The ultra-high frequency card issuer ZJ402 is a high-performance multi-protocol electronic tag interrogator for UHF band ISO18000-6C (EPC C1G2) and ISO18000-6B. It is designed with independent intellectual property rights. Combining with the proprietary and efficient electronic tag anti-collision algorithm, it can achieve fast reading and writing of electronic tags while maintaining a high reading rate. Designed with independent intellectual property rights, it fully supports electronic tags compliant with UHF EPC Gen2 (ISO18000-6C) and ISO18000-6B protocols. With an advanced tag anti-collision algorithm, it has a high reading rate. The operating frequency is 902-928MHz (which can be adjusted according to the requirements of different countries or regions). It works in the frequency-hopping spread spectrum (FHSS) or fixed-frequency transmission mode. The output power is 10dBm (adjustable). It has a built-in transmitting and receiving antenna. The reading distance is >180mm, and the writing distance is >80mm. It gets power from the USB interface, so there is no need for an external power supply. It supports the USB1.1 interface, and the working modes of virtual serial port, driver-free USB, and driver-free USB emulating keyboard are optional. The output format and parameters in the emulating keyboard mode can be customized. With a slim and sleek design, it provides a dynamic-link library (DLL) to support secondary development. It can be widely used in various radio-frequency identification (RFID) systems, such as logistics, personal identification, intelligent parking lots, access control systems, anti-counterfeiting systems, and production process control.
II Technical parameters
| Extreme parameters | |||
| Items | Symbols | Values | Units |
| Power supply voltage | VCC | 16 | v |
| Operating temperature | TOPR | -10～+60 | ℃ |
| Storage temperature | TSTR | -25～+80 | ℃ |
| Specifications (Unless otherwise specified, the indicated specifications are based on the operating conditions of TA = 25°C and VCC = +5V) | |||
| Items | Symbols | Values | Units |
| Power supply voltage | VCC | 4.5～5.5 (5 typical) | V |
| Operating current | IC | 90～150 (90 typical) | mA |
| Operating frequency | FREQ | 902～928 | MHz |
| Effective distance | DIS | 0～180 (120 typical) | mm |
- The parameters and functions of this card issuer may vary depending on the standards of different countries or regions and different environments, and no further notice will be given.
III Product display
Real-shot display
