About Zirgy
[+]
sales@shzjsmart.cn
Address
3F, Building 1, 875 Qiuxing Road, Pudong New District, Shanghai
I Product introduction
Name: Ultra-high frequency card issuer ZJ401
The ultra-high frequency card issuer ZJ401 is designed with the company's independent intellectual property rights and fully supports the EPC C1G2 (ISO18000-6C) protocol. The operating frequency is 840-960MHz (which can be adjusted according to the requirements of different countries with independent intellectual property rights design). It fully supports the EPC C1G2 (ISO18000-6C) protocol. The operating frequency is 902-928MHz or 865-868MHz (which can be adjusted according to the requirements of different countries or regions). It supports fixed-frequency or frequency-hopping transmission working modes. The reading distance ranges from 10 to 300CM (which can be adjusted according to the needs of different scenarios). The multi-tag identification performance is greater than 50 tags. The tag identification speed is greater than 50 tags per second. The tag cache capacity is 370 tags @ up to 128 bits EPC or 120 tags @ up to 496 bits EPC. It has a low-power consumption design and supports power supply via the USB interface or an external single +9V power supply. It supports RSSI. There are 2 GPIO general output interfaces. It supports USB (virtual serial port), RS232 serial communication, Wiegand (optional), and USB HID emulated keyboard (optional) interfaces. It has high stability and will not generate heat even when working continuously under full load at room temperature for a long time. It can work 24 hours a day, 365 days a year. It supports online firmware upgrade. It can be widely applied to personal identification, conference check-in systems, access control systems, anti-counterfeiting, and production.
II Product parameters
- Electrical features
| Extrreme parameters | |||
| Items | Symbols | Values | Units |
| Power supply voltage | VCC (USB power supply) | 6 | V |
| VCC (external power supply) | 12 | V | |
| Operating temperature | TOPR | -10～+70 | ℃ |
| Storage temperature | TSTR | -20～+85 | ℃ |
| Specification | |||
| Items | Symbols | Values | Units |
| Power supply voltage | VCC (USB power supply) | 4.5～5.5 (5 typical) | V |
| VCC (external power supply) | 7～12 (9 typical) | V | |
| Operating current | IC | 180～200 | mA |
| Operating frequency | FREQ | 902～928 | MHz |
| RF Power | PRF | 0～26 | dBm |
| RF power accuracy | AP | +/-1 | dB |
| RF power flatness | FP | +/-0.2 | dB |
| Reception sensitivity | SR | -70 | dBm |
| Dimension | L×W×H | 122.4*84*20 | mm |
- Technical parameters
| Operating frequecy: 902-928MHz |
| Operating current: 180-200mA |
| RF power: 180-200mA |
| RF power accuracy: +/-1dB |
| Product dimension: 122.4*84*20mm |
| Operating temperature: -10～+70℃ |
| Storage temperature: -20～+85℃ |
| Power supply voltage: 6V (USB power supply) 、12V (external power supply) |
| Power consumption: It features a low-power consumption design and supports power supply via the USB interface or an external single +9V power supply. |
| Interfaces: It supports USB (virtual serial port), RS232 serial communication, Wiegand (optional), and USB HID emulated keyboard (optional) interfaces. |
III Product display
Real-shot display
