What about the RFID fixed asset inventory software? Functional and equipment-appropriate
Selecting RFID's fixed asset inventory software, which really determines how to use it, is often the two most fundamental questions: first, whether handheld terminals or fixed readers can stabilize reading of your labels on site; and second, if read data can be easily matched to the record in the asset number, financial depreciation or ERP. The first two steps are not working, and then the back functions are empty.
First persecute: handheld does not sweep the label on metal equipment
A client who made a lease of equipment, had thousands of machines in the warehouse that were to be rented, and had been fitted with normal non-dry tape code. After RFID, they purchased some ultra-high frequency tags and two similar handhelds. The first count turned over: handhelds were above their heads, labels were not even 60% readable, metal casings blocked out a half of the signal.
And then the problem was two things: one is that handheld antennas are Circumpolar, less-breeding general use, more suitable for costumes, and a scene like books, which looks like a workout when it's in a warehouse full of metal equipment; and the other is that labels themselves do not have special treatment for the metal environment, so they are placed on the metal surface as to "block" the antenna.
The lesson is straightforward: Before selecting software, you have to make sure that hardware can read labels in your specific asset scenario. Metals use metal-resistant labels, and long reading distances change handheld machines with high value or direction antennas, so that the software does not cure a problem that the hardware cannot read at the level of the machine.
The real function of the inventory software is not just "cleaning out the results."
Many people think very simply of the RFID inventory -- just sweep out an asset card and write a name number. It's not gonna work much.
We can focus on these:
- Batch collection and weightingDozens of labels at a time, software is able to re-order and sort the EPC codes, and then submit them in bulk. There are thousands of pieces left when the handheld is locally unconnected, and it is automatically uploaded back into the office area, which is critical for the location of the warehouse's poor signal.
- Unusual Asset Identification. A non-book label appears suddenly during the inventory, and the software will be able to mark it; those that are on the account but cannot be cleaned on site will also be listed separately. These two types of anomalies are precisely the core value of the inventory.
- Synchronize data backwriting with the desk account. The inventory results are not just a source of Excel, but can be directly rewritten into the existing asset management system or finance module. Back-up supports field mapping, status change records, and financial and audit is only useful.
- Multi-Scenes Count Mode. The same software, where the warehouse is a handheld mobile disk, reaches a small, secret space such as room and office, which can be replaced by a precise location or small range trigger, and no reloading is required for the mode switch.
The equipment isn't "just connect."
Software to identify RFID readers is only the first step, and more details are available for depth.
First, look.Openness of communication protocols and interfaces. Many readers provide drivers for their own software only. A third-party stocktaking application may fail to connect or may read only some of the data. Check for support for standards such as LLRP and EPC Class 1 Gen 2, comprehensive development interfaces, and whether firmware upgrades preserve existing features.
Second, look.Real speed of batch reading and writing. The device, also called 200 labels per second, is marked with different materials and various density assets, which vary widely. Whether the software level supports power reconciliation, filters labels, sets inventory time, and these parameters directly affect the amount that eventually stabilizes reading.
Third, look.Unified management of different forms of equipment. More and more scenes are used with handheld + fixed-readers + desktop haircards, and the inventory software is best managed in one workstation with multiple devices, grouping and scheduling, rather than cutting each one by a client.
How do you verify that the manufacturer is telling the truth?
Any manufacturer will say that his software is fully functional and well-suited.
- Requires a demonstration on real assets. Bring the three or five most difficult-to-read objects (metals, liquid packaging, dense shelves) in the warehouse and let the other party walk through the whole process. The reference value is limited if shown only on whiteboard or plastic samples.
- Ask after the sale.. There's a problem with the software, is it a direct interface from the original plant or a layer of subcontracting? The solidware upgrade, additional tag purchase, and the channel is smooth? Half the problems with the RFID project are in the maintenance period of the equipment, not at the time of the procurement.
- Industry experience, not number of clients. What industries have been used are often more convincing than how many. Again, the requirements for software are far from good in terms of RFID, clothing logistics and machine and equipment.
Select the actual path
Take all the above, and suggest that we proceed in this order: first, a small-scale field test to confirm that with your asset mass and placement, the RFID labels and the reader combination will get the desired reading rate and range; then you can try the software with the EPC code for testing, see how heavy it is, the anomaly mark, whether the desk account returns these functions; and finally, talk about the amount of the purchase, the price, the deployment cycle.
When we do the RFID fixed asset program for our clients, we're used to synchronize hardware testing and software validation -- reading a few labels that determine data volumes, which in turn determine whether the software should be batch-processing, or not, or retrofitting or batch-up. Hardware software is held back, and it is easy to separate selections. If you have a similar pit in your project, or are at a comparison stage, you can leave a specific scene, and we see how it will be.
The RFID fixed asset inventory is not "sale-to-soft" -- it's a chain project from labels, readers to software billboards. The core of the software selection is whether it can get the data that you need in this chain and get it to where you need it.

Ms. Lei
Mr. Pang