How do you choose the RFID fixed asset management software?
RFID Knowledge

How do you choose the RFID fixed asset management software?

PublishedShanghai Zejie Smart Technology Co., Ltd.

Core judgement:The RFID fixed asset management software cannot read only "Reads Readable", the selection should verify the asset desk account, label code, inventory process, permission audit and on-site recognition. It is recommended that small-scale tests be done with real scenes, focusing on identification rates, missing reading rates, error rates, time-consuming count and data synchronization results.

Point 1: Identify the RFID by asset scenario

RFID is a radio wave recognition tag technology, and labels need not be scanned like bar codes. The most common programs in fixed asset management are the UHF and HF programs, which first confirm the material of the asset, the distance of the label, the inventory range and the live interference.

scene Focus. Test Method
Office, classrooms, general warehouse Batch counts, handheld mobile identification, offline use Number of labels, number of missing and time-consuming entries recorded by region
Metal equipment, cabinets, servers Anti-metal labels, tag placement, reflect interference Mark the equipment in different locations, and compare distance recognition and stability
Archives, tools, swing goods Small label size, close range recognition, loan back records Simulation of access, return, handover and check for repetition

The UHF program is suitable for regional inventory and mass identification, but the actual distance is influenced by the reading/writing power, antenna direction, label type, asset material and field layout. It cannot be judged solely on the basis of propaganda parameters. The technical specifications refer to the requirements of ISO/IEC 18000-63:2021 for air interfaces, which should still be based on actual field results.

Element 2: Checks whether the software covers the full life cycle of the asset

Software must at least be a series of “scan, label, access, transfer, loan, maintenance, storage, scrap, inventory, retroactive” to record. Only systems that support the entry and inventory may continue to rely on table supplements and are prone to discrepancies in accounts.

Select the type by taking a set of test data that contains new, transferred, maintained and scrap, and walk through the process in its entirety. Focus is on whether: to keep the original record after the asset has changed position, to have a hint for re-import, or whether the end-of-life asset can be miscalculated into the asset in use.

Element 3: Validation of identification capability by field testing, not only equipment parameters

The recognition capability should be broken down into four indicators: Identification rate, Leak rate, Error rate and Repeated Read control. The following calculation can be used: Identification rate = Number of labels at the site for actual identification tag numbers x 100%; Leak rate = Number of labels for unrecognized tag numbers = 100% at the site. Tests must be based on fixed people, routes, speed of movement and antenna direction, ensuring that results from different software programs are comparable.

  1. Prepare a real set of assets covering plastics, boxes, metals, proximity to liquids and intensive stacking.
  2. Establish an accurate list of each asset, recording the tag code, the asset code, its location and the material of the asset.
  3. Individually test individual reading, bulk reading, mobile inventory, wall or cabinet reading and performance in a strongly disturbed environment.
  4. Repeat the test at least three times. Record how many tags were correctly identified, which were missed or read in error, and how long each run took.
  5. Matches the read data with the task list to confirm whether the software automatically marks anomalies, rather than showing only a string of labels.

Software should also handle double reading. When the handheld stays in the same area, the same label may be read many times; the system needs to weigh by time window or task rule and keep original reading records. For high-value devices, closeness confirmation can be increased, photo verification or liability confirmation reduced the risk of mistasking and error.

Point 4: Focus on data, authority and equipment compatibility

The RFID project does not purchase a single scrutinizing tool, and the software is to be matched with handheld equipment, reading and writing devices, printing equipment and existing asset data.

Check items Elements to be confirmed
Device Connection Supported handheld terminals, reader connections, offline caches, breakwire reconnections and data transfer mechanisms
Data interfaces Whether basic desktop accounts can be imported through standard interfaces and whether field mapping, incremental synchronization and failure records are supported
Permission Control Access to view, edit, inventory and clearance by organizational, departmental, location and role limitations
Operational audit Whether to record login, re-send, remarking, transfer, end-of-life and export operations and check for pre- and post-modification content
Unusual treatment Is there a clear hint when network disruption, duplicate labels, assets are non-existent, tags have been cancelled and inventory conflicts are counted

Shanghai-based Selecting Tech, when combing out the needs of such systems, usually separates "functional presence" from "in situ availability" for receiving and inspection: the former checks menus and processes, while the latter tests real assets, real routes and real network environments. This way makes it easier to detect detached inventory, label re-advertising and actual problems with changing location.

Element 5: Setting up test run acceptances with quantifiable indicators

Before the official deployment, it is recommended that a department, a warehouse or one-tier office area be selected for commissioning, with the number of assets set to the actual size, without covering all locations at first. The acceptance and inspection indicators are determined before testing, so as not to be subjectively judged after testing.

The test run report should preferably also maintain the original inventory list, the equipment log, an anomaly screen and manual review results. For areas where the recognition rate does not meet internal requirements, a check of label type, installation location and antenna configuration should be made before determining whether the software process needs to be adjusted. Many identification problems are not caused by single software functions, and must be combined with tags, equipment and field environment analysis.

Point 6: Finish software selection according to this list

You can place the candidate software in the same score sheet, setting weights according to business importance. It is recommended that asset life cycle management, on-site recognition capability, data interface, rights audit and implementation maintenance be rated separately, and each requires evidence of demonstration or testing.

  1. Collating the number, type, material, distribution location and inventory cycle of existing assets.
  2. Identify the type of labels, handheld equipment and network environment to be used.
  3. List the functions that must be performed, distinguishing between “necessary” and “subsequent configuration”.
  4. Prepare test sets with normal and abnormal data.
  5. On-site inventory testing is done along a single route, recording recognition, leakage, time-consuming and data synchronization results.
  6. Check interfaces, privileges, logs, reports and subsequent transport arrangements to re-evaluate the overall input.

When selecting RFID fixed asset management software, the number of functions is not a basis for judgement. The more practical criteria are: whether assets can be properly archived, whether labels can be identified in a stable manner, whether anomalies can be detected in time, whether the flow can be recorded and whether the inventory results can be returned to management decision-making. First, small field measurements are done, then deployment ranges are determined by data, usually more secure than purchasing directly on the promotional page.