How do you choose the RFID fixed asset management software?
Select RFID's fixed asset management software, with three hard conditions: the identification program will match your asset type (more or less metal, more distance), the core function will run through the "Pardon-Access-Account-Disposal" process, and the system will be able to connect to your existing financial or ERP. Consider these three things first, comparing the manufacturer’s implementation experience, and then make a lot less of pitfalls.
What are the RFID's programmes for identifying fixed asset management software?
RFID systems are usually classified by frequency. UHF (860–960 MHz) offers long range and bulk reads of hundreds of tags, making it the standard choice for fixed assets. HF (13.56 MHz) is short-range and inexpensive, suited to small, cost-sensitive deployments. LF (125 kHz) is used almost exclusively in specialized industrial settings and is not generally needed for asset counts.
Specifically, the identification device is usually a "fixed reader + handheld terminal" combination. The fixed reading and writing device is installed at the machine room entrance/exit or shelf pass, automatically identifying the assets entering and leaving; the handheld terminal is taken by the inventory officer to the warehouse, and the office area is scand. Data on both devices are sent back to the same backstage software, where the asset is, who takes it, and the account is clearly located.
What about passive and active labels?
Most fixed assets are used with passive labels (unactive tags), low-cost, long life (5-10 years of normal) and no pipe. Active labels (source labels) carry their own batteries, which can give a signal, far away, but at unit cost, change batteries for several years, only large containers, and assets like vehicles that require remote tracking are counted. Ordinary tables and chairs, instruments, devices, passive labels are enough.
What fixed assets fit on RFID?
The criteria for judging are simple: large, high value, variable location and error by hand. These categories deserve priority:
- IT equipment: servers, notebooks, printers, network equipment, high unit cost, easy to move
- Production equipment: machine floors, detection instruments, moulds, frequent redeployment across workshops
- Office furniture and laboratory equipment: large number of and scattered on different floors
- Medical equipment: cost per unit, high supervision requirements
Conversely, a small number of fixed-positioned assets (e.g. building-affiliated air conditioners, fixed plant facilities) would be sufficient with bar code or even manual billings without RFID for the purpose of going on RFID.
What about the RFID tag? Should I put on the metal tag?
If you have more metal in your assets (e.g., cabinets, equipment case, metal tools), you must use a metal-resistant label. The normal RFID tag is disturbed on the surface of the metal, and the reading and writing distance can shrink from a few metres to a few centimetres, which is not readable. There's a suction material inside the anti-metallic label that re-utilizes the radio frequency energy of the metal, at a price 2-5 times higher than the normal label, but it's the money that RFID has to spend on the metal asset.
The other parameters are also to be seen:
- Read-write distance: The conventional URF label is 3-8 metres in air and is depreciated in the metal environment
- Storage capacity: 96bit from EPC area, 512bit-2KB in user area, sufficient asset number and small amount of information
- Seal: paper-free (suitable for office furniture), ABS shell (fit for outdoors or bad environment), PCB hard mark (suited for internal equipment)
- Protection level: The label used in the outdoor or workshop is subject to IP grade, and above IP65 is more secure
What should be the core functionality of RFID fixed asset management software?
A qualified RFID fixed asset software, covering at least the following links, is incomplete:
- Asset builder: Enter name, number, category, value, use department, date of purchase, volume import to Excel
- Label encoding and binding: matching the EPC code with asset number one, so that you can see "which labels are tied to which asset" in the software
- Access and return: employee scrutinizing equipment, system automatic write-off when returned, record responsible persons and time
- Inventory: Supports hand-held terminal offline, fixed automatic inventory, automatic matching of results and system accounts, with differences shown separately
- Asset redeployment: Division A moved to Section B, with the transfer being carried out by the routing of the accounts of both parties updated simultaneously
- Depreciation: Ability to automatically draw depreciation on a year- or workload-based basis, ease of reconciliation
- End-of-life disposal: Assets that are due or damaged follow the process of end-of-life write-off automatically from the general ledger
- Statement: idle, inventory differences, summary of departmental assets, exported on a monthly or as required basis
How do you run the count process?
The first step is to lock the accounts in front of the inventory, and only allow new or scrapable items during the count, so as to avoid any border disturbances. The second step is to scan them on site: the Clipmaster moves to each area with a handheld terminal, follows a loop by RFID, and the terminal automatically records the labels read. The third step is data matching: terminal data back to software, system automatic and account-to-face, billing "discount" that does not appear in the account but cannot be cleaned up, "pad-over" that is not found on the account, and the CDI has confirmed it twice at the scene.
Manually counting the assets in an office building can take three to five days. With a handheld RFID reader, one person can usually finish in a day. The efficiency gains are substantial. On similar projects, we normally recommend piloting the workflow in one building or warehouse before rolling it out fully.
How does the system interface with existing ERP or finance software?
There are two main ways to connect. One is the direct connection of databases, RFID directly reads and writes ERP asset tables, real time syncs, data consistency but high alignment, and ERP upgrades on both sides. The second intermediate interface, the transfer of assets changes by API or WebService at a time, the presence of ERP, RFID only handles tags and Zinventory counting, and the high degree of flexibility that business data write back through interfaces is the current mainstream approach.
Before you go to IT, you have three things to confirm: whether ERP provides a standard asset interface, what are the norms for field mapping, how historical data is imported. If there is an older ERP, without a standard interface, the RFID software manufacturer will write into the contract if it can provide customized development.
How do you judge implementation when selecting a manufacturer?
See three points. First, there are no similar industry cases -- manufacturing and school experience is different, so they can provide a real, searchable client scene. Second, the implementation team is self-employed or outsourced, the self-employed team is familiar with the product, and the problem is quick. Third, after-sale terms -- how long does the label printer work, the software responds in hours of trouble, remote support must go to the door, and all this is written into service agreements.
Shanghai-based Selective Technologies has done several different projects in the direction of RFID fixed asset management, previous label selection, site surveying, and re-entry to ERP systems, usually to get a clear classification and inventory of assets with clients, then implement programmes, and avoid pushing products at once.
What are the types of pits that can be easily stepped on when choosing?
Several high-frequency pits are pre-empted: one is the price of a label that ignores the cost of reading and writing, and software, which is less than half the average budget, and the software and implementation is the big deal; two is the cheap voter label, which takes place six months after the de-marking of the workshop or outdoor environment; and three is the difficulty of ignoring and existing ERPs, with the cost of re-interfacing laterally well ahead of schedule.
The idea is to start by identifying how many types of assets you have, what kind of materials, how many times you take an inventory, and go to the manufacturer with these questions, so that each other can offer a program and offer, which is more effective than the direct price. The RFID fixed asset management is not a one-time input, labels, readers, long-term maintenance and upgrade of software, and it is more stable to select a supplier that can run with the least offered.

Ms. Lei
Mr. Pang