What about the RFID fixed asset management software? Functionality and recognition capability?
The RFID fixed asset management software cannot read labels only, but should focus on three types of capabilities: the stability of tag identification, the integrity of asset operations and the traceability of unusual data.
What core functions would the RFID fixed asset management software require?
The core of the fixed assets software is not simply a substitute for paper registration, but a traceable record of “assets build-up, labeling, access, redeployment, inventory, maintenance, end-of-life”. It is recommended that at least the following functions be reconciled:
| Function Module | Elements to be addressed |
|---|---|
| Asset builder | Asset number, name, specifications, date of acquisition, original value, liable person, location of deposit, status of use, photo and attachment |
| Label Management | Label encoding generation, batch printing, patching, binding verification, tag cancellation and re-linking |
| Assets flow | Treasury, access, return, assignment, loan, maintenance, storage and end-of-life records |
| Inventory Management | Tasks generated by department, region, responsible person or asset class, recording inventory, unasset, surplus, loss and location anomalies |
| Authority and audit | View and operate the range by job control, keep the operator, time, change and content |
| Data interfaces | Support Excel import and export, and preset data interfaces with finance, personnel, warehousing or identification systems |
The software also distinguishes between " asset status " and " inventory results " . For example, a device may be in " service " , but this inventory shows " location abnormality " ; if the system retains only one status field, it is difficult to determine whether the asset changes are not registered or the label is misread.
What parameters should the RFID's ability to identify be based on?
Identification is determined mainly by the frequency band, label type, reader/writing, antenna setting, on-site environment and software anti-duplication mechanisms, and cannot be judged solely by the distance of reading in the campaign.
- UHF:Common work bands are about 860-960 MHz, and the associated air interface is ISO/IEC 18000-63:2021. It is suitable for long range, multilabel recognition, but metal, liquid, dense stacking can affect reading effects.
- HF HF:The usual working frequency is 13.56 MHz, and the relevant label criteria include ISO/IEC 15693 and ISO/IEC 14443.
- Source tag:Inline batteries, identifying distance and reporting capacity are usually more robust, but label costs, maintenance and battery lifetime need to be assessed separately.
The selection should allow the supplier to provide a record of the field test, rather than only theoretical parameters. The test contains at least an open environment, by the metal cabinet, by the liquid container, a dense set of files and people passing through the same scenes, and records the number of labels, effectively read quantities, repeat reading numbers, missing numbers and time of completion.
For example, if you place 100 tags for a task and get 98 reads, that does not necessarily mean a 98% read rate. Check that all 98 are from the target area and that none came from adjacent shelves. Calculate the effective read rate as the number of target tags correctly read divided by the total number of target tags, and record the false read rate separately. Note the test date, tag model, reader model, antenna position, and site conditions.
How should labels and equipment be selected for different fixed asset scenarios?
| Applications | Appropriate means of identification | Selector Focus |
|---|---|---|
| Office computers, tables and chairs, printing equipment | HF close-range verification or UHF area inventory | The labels are strong and acceptable, avoiding error in reading of walls or adjacent rooms |
| Warehouse racks and spare parts | UHF Bulk Inventory | Control of antenna direction and power, handling metal shelves, intensive positioning and regional boundaries |
| Machine room equipment | Close-range verification is the main one, and if necessary, UHF | Focus on metal cabinet reflection, equipment operation safety, labels for temperature and grinding |
| Archives, vouchers and file boxes | UF label for HF or paper-appropriate media | Controls the overlapping effects of label thickness, reading distance and batch count |
| Outside or production area | Responsive labels with handheld | Water, dust, oil-resistant, friction-resistant, confirmation of equipment sustainability and offline |
Metal assets cannot be directly labelled with normal non-dry glue. The labels with a shield or dedicated anti-metal structure are needed and tested on the actual asset surface. Liquid equipment, glass containers and electric generators are also subject to separate verification because of changes in labeling positions that may lead to differences in reading effects.
How does software judge whether an asset is correctly identified?
A qualified system should not only show “read a code” but also compare the read results with the rules of operation.
- Assets acquired:The label code exists and is in the area allowed by this task.
- Unassetled assets:Assets are on the list of tasks, but not read within the specified time frame.
- Location anomaly:The label is read, but the area does not match the system ' s registration.
- Status anomaly:Assets are scrapped, stored or borrowed and read at the site.
- Repeat or illegal label:Repeated, uncodified or disabled.
- The blogger says:Signals are short-lived, too far away or do not meet regional border rules and require manual review.
The inventory process can be set to "mandate generation -- asset range confirmation -- read on-site -- review of results -- audit of discrepancies. Handheld terminals are best used to support off-line caches, and then network back-up before uploading; stationary devices should support reading logs, timetamps, device numbers and antenna information. This can be traced back to the change in assets themselves, to the label problem or to the differences caused by the environment.
How can we judge whether the RFID fixed asset software is really suitable for this unit?
A small set of pilots can be used to replace simple presentations. Select 20-50 representative items, covering office equipment, metal equipment, documentation and warehousing materials, to complete the build-up in real process, labelling, access, transfer and inventory. The pilot cycle is set at a practical management rhythm, with the following indicators recorded:
| Evaluation projects | Results of the recommendations recorded |
|---|---|
| Scanner efficiency | Time-consuming individual asset build, batch import success rate, number of duplicates |
| Identification of performance | Effective recognition rate, number of missing, quantity misreaded, differences under different materials |
| Inventory Efficiency | Time taken to complete designated areas, number of manual reviews, and time spent on unusual disposal |
| Data accuracy | Aligning asset codes, locations, duty-bearers and status with actual situation |
| System fit | Mobile-end operating steps, offline capability, privileges settings, interfaces and export formats |
When designing such a management process, Shanghai-based Sieger Tech Ltd. is better placed to assess the software rules and on-site identification tests together: whether labels can read only as basis, and also to confirm that they can be automatically classified after reading, to detect location differences and to establish an auditable inventory record. For larger assets, regional complex units, it is recommended to identify labels and equipment combinations before formal deployment ranges.
What are the issues to be identified with software service providers before procurement?
- The system supports frequency bands, label protocols and type of reader and allows access to existing equipment.
- Whether the batch slotting, lot labelling, tagging and asset code rules are supported as self-defined.
- Whether to distinguish between leaks, draw margins, location anomalies, duplicate labels and illegal tags when taking an inventory.
- Whether the handheld supports offline operations and how data are saved and uploaded during a break-off.
- Whether or not to maintain a complete operational log and whether the change in the record of changes can be viewed with the modification of the asset key field.
- The ability to generate statements by department, region, duty-bearer, asset class and time frame.
- The field tests are conducted by whom, and the assets, test indicators and acceptance calibrations are pre-cleared.
- If the system is to be redeveloped following the addition of labels, readers or management areas.
Select the RFID fixed asset management software, and suggest that "business functions, recognition capabilities, data traceability, field fit and expansion costs" be placed in the same assessment form. First, you validate the effects of identification with real assets, then you confirm whether the software can turn the results of the inventory into a processable anomaly record, usually closer to actual use than a single-read list of functionality.

Ms. Lei
Mr. Pang