What about the RFID fixed asset inventory software? Equipment adaptability
Industry News

What about the RFID fixed asset inventory software? Equipment adaptability

PublishedShanghai Zejie Smart Technology Co., Ltd.

What should RFID fixed asset inventory software look at? Why is equipment fit first?

Select the RFID fixed asset inventory software, which is not a small number of features, but an interface that looks good, but it does not look at whether you can handle the equipment in your hand. The RFID system (radio frequency recognition, simply understanding is to use radio to put "electronic ID" on the asset), software, readers, electronic labels are three sets, and compatibility between them determines the accuracy of the count directly. Poor matchability, even if the software is fully loaded, cannot read labels on the spot, has a high rate of leakage, and the whole package is useless. That is why most people who have actually done the project place their equipment fit to the top of the selection list.

What are the hardware parameters to be followed by for a reader?

Reader (also called "reader" "reader" -- the essence of which is a small box that sends, receives signals) is the throat of the whole package. The determination of whether a software really supports your reader depends on at least three lower-level details.

Frequency and working bands

In China, 99% of RFID fixed asset counts use UHF, in the 860–960 MHz range. Chinese radio regulations allocate 840–845 MHz and 920–925 MHz to RFID, so your reader must be able to operate in the allocated bands and the software must recognize its channel. Some imported readers default to US frequencies across 902–928 MHz. Check that their software can switch to the Chinese bands, or reads may be slow and limited in range.

Interface type and connection mode

Handheld dot guns usually go through blue teeth or WiFi, fixed-style readers are common RJ45 portals, RS232 series, USB interfaces. Software is required to drive these interfaces directly, not to require you to install a bunch of additional intermediate drivers. When we do the project, we use "Software is ready to plug in and drive mainstream" as the first filter item, and it is much less efficient to connect to an unwieldy layer.

Multiple labels read together

The last thing you want during a stocktake is to read only one tag at a time. With dozens of asset tags throughout a warehouse, a single round can take half an hour on foot. If the software supports anti-collision under EPC C1G2, an international RFID tag communication protocol, tags can take turns responding without talking over each other. In theory, more than 100 tags can be read in one pass. At one warehouse operation, a standard handheld reader consistently picked up on-metal tags on 60-80 shelving units in one pass, making stocktakes more than ten times as fast as manual counting.

How do you choose not to step on a pit?

The label (the "electronic ID" on the asset) is the one most neglected by people, but the easiest to get into. Selecting the tag isn't about price, it's about where it is.

Normal Paper Label

It's low cost, suitable for a desk, file cabinet, plastic shell. But it's shielded on the metal surface, and reading can be reduced from 3 metres to dozens of centimetres, which is almost impossible to read. This is something that many people find wrong when they buy back.

Anti-Metallic Tags

Specially designed for metal assets, such as server cabinets, machine beds, steel shelf, power supply. Inside you you have a suction material (a special medium that can change the direction of an electromagnetic wave) that allows the signal to be read by interference. Reading distances are usually between 1-8 meters, looking at label size and power.

Special Environment Tag

Outdoor assets, cryogenic cold banks, oil-contaminated workshops need to select high temperature (up to 200°C for high temperature PEI materials), waterproofing (IP67 and above) and special labels of acid-resistant alkali. For example, an outdoor transformer at a power plant, the chemical plant's reaction is wide open, and the label must be carried to the environment.

What is the combination of different asset types, labels and readers?

In practice, the type of asset determines the hardware mix and no one set of programmes can feed all the scenes.

IT room and server scene: Server cabinets are very dense, metal-rich, small metal-resistant labels (sized to approximate the size of a coin), medium power handheld guns (between 1W-2W) with a gap in the cabinet. Fixed disc points fit for antenna arrays on the cabinet channel, and sweep one line at a time.

Office asset scene: desk, chair, file cabinets, such assets are not properly shaped, spread out, and suggest a common label + hand-held manual inspection to be pushed from office to office. Read the distance 3-5 meters is sufficient, without high frequency power.

Production line equipment scene: machine beds, flow lines, large man-loading packages, large numbers, fixed positions, more suitable for a combination of fixed-style readers + large anti-metallic labels. Load antennas at key locations, automatic recording of assets in and out, almost without manual intervention.

Shanghai-based Skill Co. Ltd. usually allows clients to list first the top 20 high frequency (HF) inventory objects, then push back the hardware mix, which is less easy than directly reporting a full set of lists.

What steps are the most likely to be made in actual deployment of software systems?

The hardware is right, the software is not wrong, it's a shell.

One is that the tag data is in conflict. The same EPC number (the only identity number in the label) is written several times, leading to two assets being identified at the time of inventory, and the data is confused if the software is not re-engineered. The compliance software should be uniquely checked at the writing link.

The second is that the protocol version does not match the one between a reader and software. For example, the firmware of a reader goes up to a new version, the package fails, the handshake fails (the "not matching the code"), the device cannot be identified in the system. The type must be selected by asking for the solidware compatible list of the software.

Three are environmental interference. Wi-Fi routers in the warehouse, and to walkers, electric forklifts are all sources of interference by RFID (the devices send electromagnetic waves and RFID signals "crash.") When field debugging, software is able to switch channels, power, read sensitivity, and respond to different levels of disturbance. This is a key rating that differentiates between "capable" and "good" use.

How do you quickly verify that a RFID inventory is not suitable for you?

Three actions suggest you do it:

First, the supplier is asked to provide a sample of field tests that match your asset type. Take your typical 10 types of asset and get the vendor labeled, read them in their software, and record the rate of error (the percentage of failure to read) and error (the percentage of error). The rate of error exceeds 5 per cent, and the one-tier scenario with an error rate of over 1 per cent is recommended for immediate abandonment.

Second, look at the equipment compatibility list of software. See if it contains a specific reader type, solid version, interface protocol.

Third, ask whether hardware should be replaced when software upgrades follow. A mature system should be a software upgrade that is compatible with old hardware, rather than an upgrade that allows users to change their readers.

The equipment adaptability thing, which is not judged by the information, must be on the scene, using your assets, running your processes, knowing if it fits. Shanghai-based technology usually arranges a live trial in the early stages of the project, running the actual assets, equipment, environmental disturbances, talking with data, much more than verbal promises.