How do RFID asset locator counts work?
When many people hear about the RFID count, the first reaction is "Replace bar code with electronic labels, and it's clear." This idea narrows the RFID. The real pain in asset management is never "Finding," not "Sixing." Combining the count action and location data, making each count from a table to a searchable map of assets, is why RFID was needed at the enterprise.
Why can't we get a hold of the count?
The traditional inventory tells you that there are 120 trays in the warehouse, but it doesn't answer "where is the tray that came to Guangzhou?" The difference in this word determines the real value of the inventory. In manufacturing, leasing, medical equipment, IT equipment, these areas, assets spread across regions and even cities, often the source of the discrepancy is not a few fewer, but a few of them are "unknown."
Once position data are tied to the number, the count is no longer a static report, but a dynamic view that can be screened by location, type, status: which equipment is pending in ACZB, which packages are not moving within three days, and which inspection devices last appear at Workshop 3 -- this information is the starting point for subsequent decision.
How did RFID get the numbers and bits at the same time?
"The number" is good. Each asset is labelled with a RFID label (which can be understood as an electronic tag with a unique number), the reader sends a radio frequency signal, the labels reflect their own ID back, and the reader reads the full ID at once. The usual UHF segment works between 860-960 MHz, reading 100-200 labels in one second, which is why RFID is several steps faster than the manual disk count.
"bits" are more complex. RFID does not directly export coordinates, but estimates its location by several indirect amounts.
- Signal strength method (RSSI)The closer the label to the reader antenna, the more powerful the reflecting back signal, which reverses a rough distance, with a positioning accuracy of 2-5 metres, and is suitable for the Area+ shelf level.
- Phase Difference: The position of the label is calculated by combining distance using a phase change from a radio frequency signal to an angle of an antenna array, and accuracy can be achieved at the equivocation level, but higher requirements for antenna configuration and algorithms.
- Time difference for arrival (TDOA)Multiple readers receive the same label signal inverted distance, multi-point GPS positioning thinking with high accuracy but also high deployment costs.
In the actual project, the regional-level positioning and handheld machine inspection is the highest value for money and requires a cm-scale precision to be superseded with fine-positioning programmes.
Three steps to locate accuracy
Select which sort of positioning option, and figure out what you're going to answer. If you just want to distinguish between "assets in A or B" -- that is, the RFID portal (door-ban readers antenna); if you want to answer "specifically which shelf or floor," you need a handheld machine to do a spot scan with the antenna; if you want to "open the system to see the real-time location of each label on the map", you have to put a fixed reader at the site to keep it located.
The rough correspond to data: walkways + room-level positioning, with relatively low hardware input, requires about 4-6 fixed readers for a warehouse covering approximately 2,000 square metres; and fine-positioning at the Amy level requires more antennas and field calibration (i.e. benchmarking by labels of known locations), hardware costs one step at a time. So positioning accuracy is not as high as possible, but rather alignment of business needs.
A running inventory process.
The most important thing to combine "number" and "bits" is not hardware, but process. Here's a basic step that has been validated in several projects:
- Asset encoding and tag binding: A unique number (usually using the fixed asset code available in the enterprise) is given to each asset, it is entered in the labeled EPC storage area (which can be understood as a tag "ID") and a corresponding relationship is established in the back-office system.
- Tab Selection & PasteThe metal surface is labelled as resistant to metals, plastic or wood assets are labelled with normal paper and a special anti-liquid label is used in the vicinity of liquid containers.
- Reader and antennaAccess to and from the entrances are provided by the deployment of access gates; the shelf area is equipped with fixed readers or handheld signal sources in accordance with positioning accuracy requirements; and the office area can be located on a small scale with desktop readers if assets are of high value.
- Backstage system docking: The flow of events read out by RFID (data bridge connecting readers and business systems) is pushed to EAM (Equipment Asset Management) or WMS (Stockhouse Management) system, trigger position updates, inventory statements, business logic such as an anomaly alarm.
- Manual Reassembly and Unusual Treatment: Handheld to site verification of assets that are determined by the system as "due to miss" or "unusual". This appears to be a simple step, and is key to the continued credibility of the system data.
Shanghai-based Selective Technologies, when they do programs for some firms that lease equipment and make it sophisticated, usually put a high level of step 4 -- many companies are stuck at this point, not with RFID hardware, but with intermediates and existing ERP or EAM systems in the enterprise, and events are broken. With standardized data interfaces and light quantification of intermediates, the transition cycle can be pushed from months to weeks.
A few holes common in the ground.
The first pit is...Metal and liquid interference. The metal reflects the frequency signal, the liquid absorbs it, and the reading rate is significantly reduced. The solution is to use anti-metallic labels or to avoid direct contact with the surface of the metal by raising the tag cushion 5-10 mm; the liquid environment must be labelled with a special liquid label, which can hardly be read by a normal label.
The second pit is...Label direction.. The RFID antenna is directional (the best signal when the label parallels the antenna, the weakest if it is vertical) and is either left out of the curve or covered by hand. The sticker is set at the start of the project, preferably with a graphic description.
The third pit is...Error and missingIf the door is not too tight, it may read in the next room; the antenna is over-powered and reads areas that should not be read. The solution is to do a field modulation -- set a reasonable launch power and trigger threshold (that is, less than this signal strength is ignored), and shield readers if necessary.
The fourth pit is...Data Refresh Frequency. The positioning system can't eat backstage and network if it updates all labels every second. The actual project uses the "event drive plus time-time check" hybrid mode: real time triggers when assets are in or out, every 10-30 minutes of normal time, balancing real time and system load.
How do you judge that this is not a good plan for yourself?
Before making a physical procurement, three questions can be answered:
- Is the asset ' s value high? If an asset is worth more than several thousand dollars, lost or misdirected at significant cost, RFID ' s input is considered to be a good one; conversely, bar code plus manual inspection of the value of the value is higher.
- The frequency of asset flows is small? The higher the frequency, the greater the value of location data; if assets remain unaltered almost once a year, the return-on-input cycle for positioning will increase.
- Whether the existing system is compatible? This is often underestimated. Without an ERP or EAM system to carry it downstream, RFID data simply piles in a middle sheet and does not add value.
And there are at least two of the three questions that are positive, so you can start a phased RFID inventory project, piloting from one warehouse or type of asset, and running "location plus number" in a joint, then extending to other scenes. The count is never just an count; it's from "clear" to "positioning," that RFID is moving out of homogenous watersheds in asset management.

Ms. Lei
Mr. Pang