How do fixed asset real-time counts work? State synchronization and positioning drives.
RFID Knowledge

How do fixed asset real-time counts work? State synchronization and positioning drives.

PublishedShanghai Zejie Smart Technology Co., Ltd.

Real-time inventory of fixed assets, key to keeping the asset desk account, status change record and site location information synchronized; it applies to larger asset volumes, across floors or warehouses. This is achieved by harmonizing asset coding and calibration, selecting appropriate identification methods, and using change processes and anomalies to process data deviations. Real-time is not continuous scanning, but timely updating after changes occur, and can be traced.

Rewind one: define "real time" first

The error that is easily encountered in the inventory system is not that the device is not fast enough to identify it, but that different positions have inconsistent understanding of the state "in use, idleness, maintenance, loan, end-of-life" status. The status definition should be clear before going online, and action and responsibility for the changes that can be performed. For example, when assets are transferred from office to warehouse, records should also update the custodian, location and status of the repository; if only changed, the billing may still be shown as an asset in use by the original user department.

It is recommended that a stable unique code be created for each asset, and that names, categories, serial numbers, use departments, custodians, locations, status and most recent update be set on the base field. The code should be placed on the asset to avoid directly coding the easily changed department or room number. State changes keep the operation time and operator, and then track when and where information changes.

Rediscretion II: Select the identification and location according to field conditions

Barcodes and QR codes suit item-by-item scanning and have relatively straightforward equipment and maintenance requirements, but staff need to get close and scan each asset individually. Radio frequency identification (RFID) reads tags within a given range and works well where tags can be fitted and read conditions have been verified on site. Metal surfaces, nearby liquids, and dense storage can affect performance, so start with a small test. Indoor positioning can help identify the area where an asset is located, but positioning results alone are not proof that a specific item was counted.

The accuracy of the positioning should be matched with management action: If it is sufficient to confirm that the asset is located in a building or area, information at the regional level can be used; if you are required to implement it in a room or cargo position, a more detailed field marking and location layout is required. The receipt and inspection should be done on the actual floor, under condition of putting the shelf and equipment, by testing for error, misreading and mislocation, and adjusting the label position accordingly, reading point locations and reviewing rules.

Rediscretion III: Update status into daily business processes

Real-time synchronization cannot be counted on a regular basis. Acquire, return, transfer, repair, loan and write-off actions should trigger record updating when they occur; if business systems are separated from asset desk accounts, it is necessary to specify which end the data is generated, how it is synchronized through interfaces or manual reviews, and how it is rerecorded after failure. Each change at least retains the asset code, changes the state before and after, time, handles the person and the necessary approval records.

Shanghai-based Select-Technology Ltd., when combing such processes, separates the "on-site identification" and "business recognition": scan to label only indicates that the asset is marked, not equal to custodian, for the correct purpose and state. For a transfer, loaning a high frequency action can set the required field in line with pending confirmation; if sync fails, keep cause of error and avoid system silent loss.

Redisposal IV: Replace the total number of inventory counts with an abnormal list

The inventory results should be classified as differences rather than comparing the number of books to the quantity of objects. Common situations include a lack of books, an absence of accounts, an incorrect location, an inconsistent status and a non-readable label. Each discrepancy should relate to asset code, registration location, site location, verifier and treatment results; it involves assets that are temporarily unidentifiable, which can be marked for verification and review, and should not cover the original record directly.

The frequency of verification can be set at risk and operational tempo: high value, higher random inspection frequency for mobile or frequently maintained assets, fixed installation, and periodic verification of less variable assets. Frequency is not uniform in all units, and should be determined by reference to asset size, moving frequency, management requirements and on-site manpower. Regularly check the rate of error, duplicate records, location inconsistent with unprocessed differences, and determine whether the system has really improved the quality of the count.

Round five: First small-scale validation, then extended coverage

You can select a floor or class of asset to run on a test basis, check whether the code is repeated, the label is readable and synchronized, and the anomaly is processed. After the trial is completed, adjust the field, according to actual error, the location and operation steps of the label, and then extend them to other regions. The acceptance criteria should be written in advance, such as mandatory information integrity, time limits for handling differences and on-site review, so that only "the device reads the label" is used as the completion criterion.

The core of real-time inventory of fixed assets is that each asset is recorded, each one is located in a position of responsibility and on site, and it is exceptionally reversible. First, the calibration of calibres and processes, then the selection of identification and positioning techniques by environment, and finally, continuous correction with differential data, usually solves problems of unsynchronizing the table with the physical.