How do you select the fixed asset management inventory software? Inventory efficiency and data accuracy assurance
A lot of people think it's easy to take an inventory.
A lot of colleagues in asset management came up and asked, "There's no clean-up inventory software," as if just a clean phone, which is not the same thing. In fact, an inventory is only one link in the life cycle of asset data -- really deciding efficiency and accuracy, buying into the library, taking over, moving, repairing, getting out of these day-to-day operations.If the source data is per se messy, a yearly count is just a copy of the error.It doesn't make sense to be fast.
So, before you take an inventory of the software, let's get this straight: it's not "how fast to sweep," but "how long-term to keep the books and the objects in line." Here, we're breaking down one level.
The bottleneck of efficiency in the inventory is not at that point.
Those who did the big inventory know that efficiency bottlenecks tend to be concentrated at both the back and the back ends:
Data preparation phase
The inventory is to be exported before the count, and the inventory is to clear out those that are obsolete but not sold, and adjust the records of the change in attribution. Manually, this step takes two or three days for a medium-sized enterprise (with 500-1000) to select software: whether it can generate an inventory list by department, by location; whether it can automatically reset and verify coding rules when importing a new list.
Site inventory phase
With paper-based stocktaking, a team of three takes about five to seven working days to count 800 assets. Scanning with PDAs, or industrial handheld scanners, cuts that to two days or less. The key is whether the software supportsOffline• Many warehouses, underground rooms and trans-storey plant networks are weak and cannot run without local caches.
Discrepancies processing phase
The result of the rollout is a gain, loss, abnormal state, change of location, etc. This part of the report is saved by manual filing, and the time saved is fully compensated. The spectral inventory software should automatically generate the discrepancy report and directly generate an asset status adjustment bill, which returns the data to the main account.
Data is based on mechanisms, not "caution."
The three words "data is accurate" are easy to say, and it's done by the mechanism rather than by the self-conscious. We open up a few key points:
Unique ID
Each asset needs a unique code, usually a barcode or QR code. RFID tags cost more and are mainly used for valuable equipment or metal surfaces. Keep in mind thatThe material and the printing of the label directly affect survival– The normal non-dry tape is placed on a metal cabinet or outdoor equipment, which will rise and fall in two to three months.
Double-way check
The two-way check is a physical (book-based) and physical (physical) reconciliation, with the results being double-rounded against the three types of problem that can be detected. The one-direction check usually has a 3-5% leakage rate, which can be pressed within 1%.
Operation Left Marks
Each change in the asset status is recorded by the operator, time, and value. The audit or accountability is clear and can be traced back quickly to which point when the discrepancy is taken into account. This is based on a background log, not on user self-consciousness.
Reconciliation with the financial system
The software is selected on the basis of a standard financial interface or an intermediate table import template.
The real dimensions to see when choosing a type
There is little point checking off a feature list item by item. Every vendor can produce 20 slides saying its product has everything. A more practical evaluation method:
- Level of business process alignment:Ask frontline asset managers, finance, and audit to each choose three common scenarios. Check whether the software handles them out of the box or needs custom development.
- Flexibility of the inventory approach:In addition to PDA scans, at least the number of mobile phones is supported: App, small programs, single-counting by department or floor, multi-organizational inter-territorial inventories.
- Data migration costs:Ask if the import from Excel or the old system is charged separately, and map who does it. A medium-sized enterprise migrates data once, with a reasonable budget of between several thousand and ten thousand dollars.
- Authority and approval flow:Asset acquisition, transfer and end-of-life require approval nodes, and it is critical that the software be able to define the approving authority and trigger conditions.
- Statements and self-help queries:Management is not concerned with the list of software functionality, but "can I find out at any time which department or office, how much is left in idle and how much is depreciated?"
When Shanghai Select Technologies, when it serves its clients, they usually ask each other to export the existing asset desk account for a data check -- see the field's missing rate, repetition rate, state field confusion. This is more of a test of whether the software is suitable than a manufacturer's demonstration, and it gives the client his own mind about the problems that need to be solved.
Two details that can easily be ignored.
One is the data consolidation strategy in offline mode.Multiple PDAs are counted simultaneously, how the data will be consolidated and who will cover it. Otherwise, there is a risk of confusion about "the same asset being changed twice in different inventory forms."
The second is to synchronize the inventory with the asset photos.If the unit price exceeds a certain amount (e.g. $2,000), the inventory is made to require that the photograph be kept and filed by name of asset number.
Landing advice: three steps in a more stable way
First, run through a department or class of assets.For example, to start with R & D experiments or the company-wide laptop. It's hard to tell whether it's a process or software problem without just coming up and laying out all of the company's assets.
Step two, get front-line people to be deeply involved in the selection.The real users of software are the warehousekeeper, the equipment manager, the asset commissioner, not management. It's much more useful to let them try and advise them than the manufacturer's demonstration. A front-line software employee is in conflict and the best functionality is not needed.
Step three, inventory systems and technical means are online in tandem.The software is perfect, without a system of "who takes responsibility, regularly counts, changes in status and updates" or data that's just gonna be slowly broken. Technology is the skeleton, the system is muscle, it's not going to work.
And back to the question at the beginning: How do you choose the inventory software? The answer is not "who's got a lot of functionality," but "who's gonna keep your asset data accurate for long?" Efficiency increases naturally with skill, but once the data are dirty, the best tools can't be saved. See what the asset data in your hands is, and then look at the software, which is the easiest way to go on the curve.

Ms. Lei
Mr. Pang