What are the problems that can be solved by the asset RFID fixed asset management software? Efficiency and accuracy
For the first time, many people heard about RFID's fixed asset management, and the first reaction was: instead of scanning it by a swipe. This is a very common misconception. The RFID asset management software really addresses not the question of "not getting tired of counting" but the question of whether what is on the books and what is actually going on is right, whether it can be kept up with what happens after. Efficiency is the result, accuracy is at the core.
What does the asset RFID fixed asset management software really care about?
The software is understood by distinguishing between two concepts: the RFID hardware is "hand and eye" and the management software is "brain." Hardware is responsible for rapid identification of electronic labels on assets, and software is responsible for making each recognition a traceable record.
RFID (radio frequency recognition, in short, an electronic tag technique that does not touch, and can read information from a few centimetres to a few metres) makes it possible to identify hundreds of labels at a time. But identification is itself just an entry point. The real thing that management software does is tie the results to asset desk accounts (that is, the internal account of fixed assets), so that each asset has a "digital ID."
Functionally, a complete RFID fixed asset management software typically covers the entire process of asset entry, access, transfer, maintenance, inventory, end-of-life. Each change in status leaves time, operator, location, etc. The purpose is to get assets documented throughout their life cycle.
It's a bottom logic: recognition is just an entrance, and state-connection is the core.
The outsider looks at RFID asset management, and tends to focus on "sweeping fast." But what really determines whether the system can be used is a back-end state-connected logic.
For example, transferring a laptop from Beijing to Shanghai traditionally means filling out a transfer form and waiting for finance to update the books manually. It takes three to five working days on average, and a missed update anywhere in the process makes the register inaccurate.
What does the RFID-based system do? The moment when the label is read by a new location's reader, the system knows that the device is "arrival" in Shanghai. If the approval process and attribution rules are set up, the system automatically triggers the transfer confirmation, changing the status from "Peking in Beijing" to "Premote in Shanghai." This step puts the work of the previous days at a few seconds.
The essence of the state connection is to change the location of assets, use people, and "events" all changes. Each change is an event, software records events, pushes and counts. This is also the biggest difference between RFID asset management systems and traditional Excel accounts: the latter is dead, the former being alive.
Increased efficiency.
Efficiency is not an abstract indicator, but it is reflected in several specific links.
Count Link
Counting 5,000 assets manually usually takes four people about a week. With a handheld RFID terminal, a portable device that reads tags from a distance, or a fixed reader, the same work can often be done in one or two days. Batch RFID reads work through shelving without opening cabinets or moving items.
New asset register
Traditionally, after goods arrive, asset staff enter invoice models one by one, often taking half a day for 500 items. With RFID, print tags ahead of time, tag items on arrival, and activate them in bulk. Entry can be completed in one to two hours.
Asset Search
When you need to locate a device quickly, the traditional way is to find a description of the location in a desk account and go one at a time. You scan it in an area with RFID handheld, you can locate assets near the target label in seconds. This is particularly useful in emergency maintenance, asset inventory scenes.
Which are the key points?
The accuracy is more of a concern than efficiency, because the efficiency problem affects "fast or bad," and the accuracy problem is "right or wrong." RFID asset management is structural in several points about the improvement of accuracy.
Concordance
The discrepancy in the accounts (assets on the books, not actually available) is the most problematic problem in the management of fixed assets at an enterprise. It is often due to missing information in the middle: transfers are not recorded, repairs are not returned and scraps are not written off. Every change in status of the RFID system has an operational log, with a full chain traced back, and the differences can be automatically compared monthly by region. The net manual management before the reconciliation rate will improve significantly, not primarily by hardware, but by standardizing back-end processes. Shanghai-based Skill has validated this in several industry projects.
Data timeliness
The data from the traditional desk accounts are often "state of last month" because it relies on manual entry for updates. The RFID system updates the status in real time as long as the label is read.
Responsibility rests with the people.
Each adoption, transfer and end-of-life operation requires the binding of a specific operator and approving officer. This is software-level authority control, not self-conscious. This makes asset management "who can change" to "who is responsible for who does what."
It's a place that gets stuck when you land.
The RFID fixed asset management software has several common pits during the implementation phase.
Tab Selection and Paste Location
The distance from which RFID labels are read is very much influenced by different materials (metal, plastic, wood). Metal surfaces must be marked with a metal-resistant label, otherwise the reading distance will drop from a few metres to a few centimetres. Paste position also avoids shielding and metallic interference, otherwise the failure rate at count counts will increase significantly.
Interfacing of software and existing systems
Many enterprises already have ERP systems, which simply run the procurement, sales, inventory, finance-integrated software, or financial systems. The RFID asset management software cannot be isolated, and requires that the asset desk account be synchronized with the financial system. Otherwise, the accounting department has to make a manual reconciliation, and improves efficiency.
Use of habits
The first-line staff who do not want to scan with a handheld machine will be bypassed by the best systems. The landing phase must have clear operational specifications, such as a clear code of access, and then a clean code of repair. This requires administrative, IT, business departments to work together, not one-sided software solutions.
How do you judge this software is not for you?
Not all enterprises need RFID asset management.
If the total number of fixed assets is below 500, the traditional bar code plus a table account is almost sufficient, and RFID’s advantage cannot be realized. More than 1,000 pieces, spread over more than one region or more floors, are visible in the marginal gains of RFID (i.e., the extra return on each resource invested).
The annual inventory of an enterprise, the efficiency gains are limited. The quarterly or even monthly count is necessary for RFID to continue using.
Management claims. If an enterprise has a higher level of requirement for the accuracy of its assets, such as in relation to compliance audits (regular verification of accounts by external regulation), insurance settlement, accounting for depreciation of assets, then the RFID system’s status linkage and data traceability capability is just needed.
The selection suggests that priority be given to three points: the state-connectivity capability of software (can customize approval streams, can connect with existing systems), stability of labels and Zreader (reading distance and leakage rates) and implementation experience of suppliers. A supplier with full project experience in the area of RFID asset management can help you avoid most of the pits mentioned earlier.
Return to the original question: What problems can the asset RFID fixed asset management software solve? In essence, it solves the problem of "failure in books and things, and backwardness and inactivity." Efficiency is a by-product of water to canals, and accuracy is what it really is. Selecting the shape focuses on state connections and process standardization, more meaningful than simply comparing hardware parameters.

Ms. Lei
Mr. Pang