What determines the price of rfid electronic labels: the analysis of chips, envelopes and volume factors
RFID labels are priced by chip selection, form of encapsulation, order volume three core costs, antenna design, frequency, use of the environment, surface process, and these additional items also allow prices to float up or down. The normal UHF nudity inlay can press a large unit price (over 100,000) at around $0.3, and the single price for industrial finished labels with ABS shell usually falls between $3 and $10 or higher.
Why do the chip costs weigh most on RFID labels?
The chip is labeled "brain", which determines storage capacity, protocol support and security levels, where the difference starts to rise.
- Agreement differences: ISO 14443, ISO 15693 more for NFC or gate cards, and EPC Class 1 Gen2 more for UHF logistics and storage, with price differentials in the different protocol chips.
- The capacity ladder: from 64bit Universal ID to 2Kbit, 4Kbit and even 64Kbit, the larger the unit price. Most common applications select chips below 1Kbit.
- Encryption capability: Security chips that support algorithms such as SM7 and AES are usually 20 to 50 per cent more expensive than generic chips, and must be used only in closed settings such as door-to-door, payment, documentation etc.
- Brand price differentials: Different chip-based plants, different regions of the country, have differences in their distribution of capacity and will eventually be reflected in label prices.
How does the sealing affect the unit price of the label?
The seal refers to the process of turning chips and antennas into a "workable label" with very different forms of price.
- Dryinlay: Chip+ antenna+matrix, without back-flips, is the lowest cost form with a large unit price of approximately 0.15 to 0.5.
- Wet inlay: Rewind and ionized paper on a dryinlay basis, easily marked at a unit price of 0.2 to 0.8.
- Paper label/PET face layer: with printing and modulation, it is directly attached to the goods or packaging at a unit price of 0.4 to 1.5.
- PVC card seal: HF card is in common form, with a unit price of $1.5-3 and is mainly expensive in the card base and layer-pressure process.
- Industrial-grade shell envelopes: ABS, PC or epoxy encapsulation, which are resistant to high temperatures, metal resistance and water protection at a unit price of $3 and can be in special form up to $10.
The "special seal" of high-temperature laundry labels, metal surface tags and windshield labels for vehicles often fall between 5 and 50 yuan at hard costs mainly on the material and process difficulties of the outer shell.
How low can the order load keep the price?
Order volume is the biggest lever in RFID tag price negotiations. Moving from an order in the thousands to one in the millions can result in a two- to threefold difference in unit price.
- The highest unit price, and the supplier usually charges for the engine or work, suitable for sample and test production.
- 10,000 to 100,000: Entering the standard step price is a common scale for medium-sized projects.
- More than 100,000: it's possible to talk about the price of a plant near hard cost, and it's easier to get a chip-side direct support.
If the project requires a million units of volume, the nudist play phase usually uses the chip lock price to maintain the same price band with subsequent and stable supplements. Shanghai-based Chettech, while co-opting large projects, will split the volume order from the subsequent supplement, using a large bill to press the chip cost, and secure the priority of the delivery by using a stable patch.
What other factors would make the same label offer different?
These details also cause differences in the final offer once chips, seals and batches are excluded.
- Working frequency: The antenna size of the three bands LF(125kHz), HF (13.56 MHz) and UHF (860 to 960 MHz) is completely different, as are the electrical circuits.
- Read distance: When it is required to read more than 10 metres, more complex antenna designs, such as an insect, a segment antenna or an anti-metal antenna, are often needed.
- Use of the environment: High temperature tolerance above 200°C, water resistance against IP67/IP68 and metal interference, which require direct impact on sealed materials and antenna structures.
- Initialization of data: Whether EPC code, TID code or user area data need to be written before the plant is released is relevant for inclusion in equipment and working hours.
- The surface is personalized: laser engraving, UID spray code, serial number labelling, colour printing increases the cost of single process.
- Industry certification: Medical, food contact, blast prevention etc. require additional certification costs and must be allocated to a single cost.
What should be done when purchasing RFID labels to control their overall cost?
By making these elements clear, the negotiations have been set to a bottom. The following lessons have been validated in most projects.
- Write the application re-selecting, and avoid "overperformance." Without a remote reading of the project, hard UHF sensitivity chip doubles costs.
- As much as possible, harmonize specifications and reduce SKU. The bargaining space at the time of production is diluted if the labels of five or six different chip options appear in the same project.
- A compatible alternative to the provider ' s identification of the chip selection, which would be able to reach option two when the chip was missing without affecting the overall structure.
- The orders are as concentrated as possible, rather than being divided into dozens of small bills, so that the supplier will give you a price on the discharge.
- (b) Preferred and volume batch pricing: A slightly higher unit price is acceptable at the sample stage, followed by a chaining to the ladder price at the volume stage.
In general, the price of RFID labels is not what suppliers say, but chips, caps, lots of three hard costs plus frequencies, environment, personalization of these soft options one layer at a time. These are often cross-checked before the procurement, and the overall cost is pushed down. If the project involves multiple containment forms or higher requirements for chip compatibility, the supplier can make the alternative clear at the selection stage, avoiding subsequent situations where the single chip is missing and forced to re-design.

Ms. Lei
Mr. Pang