RFID Knowledge
(b) View the latest RFID knowledge content and learn about relevant technological advances, industry trends and application practices.
RFID Knowledge
1875 articles- RFID Knowledge
What Is an RFID Reader? From Tag Read to Inventory Record
The RFID reader is a device for communicating through antennas and electronic labels. It answers with the agreed radio frequency protocol to search for tags, decode tags and then hand them over to a computer, controller or business system.
- RFID Knowledge
Four-Port UHF RFID Readers for Multi-Lane Inventory and Sortation
A four-channel UHF reader typically has four RF ports for UHF RFID antennas. In a multi-lane installation, the antennas can cover different locations or provide side coverage for harder-to-read positions. On a sorting line, multiple ports are often used to read different tag orientations on the same conveyor.
- RFID Knowledge
Fixed RFID Reader Deployment at Portals and Workstations
The same fixed RFID reader, which is installed in a warehouse door, usually determines whether a shipment has passed the specified entrance or exit. The other is placed at the working space to identify which material is involved in the current process. The former serves the access library and the batch transfer, while the latter serves the single binding, miscalculation and tracking of the process.
- RFID Knowledge
Type of UHF readers: broken down by frequency band and form
In storage, manufacturing and retail settings, UHF readers usually refer to equipment used to identify passive MHF RFID tags, often referred to as UHF readers. The procurement can be classified from two dimensions. The frequency band determines which area the device works by what set up, where the antenna is installed, who initiates reading, how the data is handed over to the operating system.
- RFID Knowledge
HF vs. UHF RFID Readers: How to Choose and Test Each Option
The selection asks: What is this identification to prove? A factory may need two types of RFID at the same time: a post confirmation of the material box in front of it, and a check-out of the cargo. The former wants the next-door box not to be selected, and the latter wants the vehicle to read as much as possible when it passes.
- RFID Knowledge
High frequency readers should apply the resolution of products and scenes in the 13.56 MHz band
A 13.56 MHz high-frequency reader reads cards on the table, and then puts them in the cabinet, but it is good and bad; the presentation is successful, with “interface success and labels still being old data” appearing occasionally on the production line. These two types of problems are often not solved by replacing a larger device. What really needs to be checked is the antenna environment, the time schedule of the mission and the writing of the confirmation link.
- RFID Knowledge
Ultra-high frequency rfid reader assessment: product line capacity and reading performance test
The most valuable question for the UHF RFID writer is not “how many metres you can read at most”, but “how to prove that performance will remain unchanged from this prototype to the next delivery.” The former can obtain a good demonstration under a set of favourable conditions, and the latter needs to share evidence after research and development, manufacture, testing, version management and sale.
- RFID Knowledge
Industrial reader selection resolution: frequency band, channel and condition matching
The industrial reader type should start with “the window at which time, identifying which thing and the range allowed to read”. The single check of the transmission line, batch identification of the tray out of the library and the location of the metal knife confirmation are available using RFID, but not the same requirements for a reader.
- RFID Knowledge
How do you upgrade the smart warehouse management system?
The common error areas for upgrading smart warehouses are first to procure a reader or AGV, then to require that the existing system be “connected”. A more secure sequence is to identify which nodes of business data are distorted or delayed before deciding what additional sensory capabilities are needed, what actions are worth automating and how the system continues to operate in case of anomalies.
- RFID Knowledge
How do you design the RFID hardware for the storage management system of wms?
WMS and RFID hardware are designed to be synergistic, first of all to avoid the direct interpretation of "labels read" as "stock changes." Readers produce label observations at a given time and within the reading area; WMS handles business matters related to documents, owner, batch, storage position and stock status.
- RFID Knowledge
What's the choice of warehouse management software? RFID capture module and hardware adaptation assessment points
The warehouse management software, which assesses the capacity of RFID to gather, recommends that candidate manufacturers first run a real business: collect, process and submit under representative loading conditions, with labels and readers planned for purchase, and intentionally cut off the net and re-transmit.
- RFID Knowledge
How do you choose logistics warehouse software?
A car has entered the park, while purchase orders still show “in transit”; warehouses have been received and transport systems have not yet completed their transportation; pallet labels are read at the door, but the number of boxes does not match the consignment order. These issues appear to be data incoherent and relate to four different facts: location, transport, physical handover and inventory.
- RFID Knowledge
How do you assess the storage software?
In the storage software demonstration, a line of labels was removed from the reader, and the inventory on the screen changed with it, which appeared to have been automatically managed.
- RFID Knowledge
How does the smart storage management platform fit?
The difficulty of the smart storage management platform often arises after the device is “connected”: the tray passes through a channel, the reader is a normal flash, but WMS does not enter the library; the re-establishment of the network leads to a repetition of inventory; and replacement of an equipment model with modifications to top operating procedures.
- RFID Knowledge
How does the warehouse material management system bind the RFID logo? From primary data, from EPC to inventory.
The RFID binding in the warehouse material management system is essentially an identity governance: the system needs to know what this label represents, which batch it belongs to, which packaging level it is at and whether the current relationship remains valid.
- RFID Knowledge
What about the warehouse management system manufacturer? RFID fit, pilot acceptance and delivery liability list.
The key to selecting a warehouse management system manufacturer is not who can demonstrate more pages, but who can provide a verifiable approach to “physical, collection events, and inconsistent systems inventory.” In particular, when accessing RFID, the reader is connected, the interface displays labels, and neither can it be consistent with access to the library.
- RFID Knowledge
What about the warehouse management software? The division of labour between ERP, WMS and RFID collections and selection methods.
The software used for warehouse management is to be determined by “insolved inventory” or “unmanageable on-site operations”. The former requires the preparation of documents, materials and inventory calibres; the latter also manages storage space, tasks, batches and unusual handling.
- RFID Knowledge
How do you choose a warehouse bar code management system?
The warehouse bar code management system should be selected not from the conclusion that “barcodes are backward, RFID advanced”, but rather from the point of view of finding operational bottlenecks: is staff looking for goods, flipping boxes, scanning or waiting for system confirmation? Barcodes are appropriate for low-cost, visualized individual confirmation, RFID is suitable for identifying multiple objects in a field-tested area of non-contact, but neither can replace...
- RFID Knowledge
How to build a smart warehouse management system, an online awareness and automated data acquisition programme
A forklift moves the tray from the platform to the warehouse, and RFID reads numbers, weights at the lbs, or tracks on the positioning system. No. The system does not know whether this move is a receipt, a return, temporary hold, or whether the same tray is passed again.
- RFID Knowledge
How to build a storage logistics system: planning pathways and data design for integration of RFID in the library with on-track tracking
The key to building a warehouse logistics system for real access in the management of storage and tracking in transit is not how many readers are bought, but three things: goods are always coded from the time they enter to the time of receipt; they are entered into, mounted, out of and loaded, arrived, signed up to form a continuous chain of events; each point of contact between the warehouse and the vehicle, the vehicle and the client has a clear record and a clear allocation of responsibilities...

Ms. Lei
Mr. Pang