How do you choose a warehouse bar code management system?
RFID Knowledge

How do you choose a warehouse bar code management system?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The warehouse bar code management system should be selected, not from the conclusion that "barcodes are backward, RFID advanced" but rather from the operational bottlenecks: is it a staff member looking for goods, flipping boxes, scorching codes or waiting for confirmation of systems? The bar code is low-cost, can be identified on a case-by-case basis, and RFID is suitable to identify multiple objects in the field of access where they are validated, but neither of them can replace the inventory rules. This paper looks at "How long does it take to complete a correct inventory with the same shipment, how much time and cost it takes to get out of the vault or inventory counting to distinguish between whole-to-do identification, single-text review and integration with the bar code and RFID to help the warehouse identify which links are worth adaptation and which are more secure.

First-costing: not just the price of a scanner and a reader

First, a baseline of operations is created, not a list of equipment. For example, the swath itself is fast, but before each scan it is to remove the film labels, and what really is worth reducing is to flip and move, rather than just scan. On the contrary, if the cost comes mainly from pick-up routes or from waiting for refilling, then RFID does not necessarily improve overall efficiency.

The RFID program needs to match the individual labels, read and write with antennas, shield or area control, trigger sensors, construction wiring, edge software, interface development and field commissioning costs. The labels should be verified by objects such as normal cardboxes, metal appliances, liquid packaging, heat-resistant loads, etc. The same low price labels cannot be used for all materials separately. The one-off output labels are also counted separately from the recycled vehicle tag: Although the latter may have higher purchase prices, long-term costs depend on recovery rates, damage rates, clean methods and actual reuse times. Read distance must not be inferred only from label capacity or price, but must be combined with antennas, location and cargo status tests.

A hybrid solution usually means assigning different capture methods to steps in the same workflow, not buying two separate systems. Use RFID for pallets or totes and barcodes for individual items and exceptions, but budget for identity association, changes when pallets are broken down, and manual fallback. Compare economics over a common period: annual net benefit = achievable labor savings + verified reduction in losses from errors − added consumables, maintenance, and operating costs. Simple payback period = incremental investment ÷ annual net benefit. If incremental investment is RMB 120,000, achievable annual benefit is RMB 80,000, and added annual spending is RMB 20,000, payback is two years. This is an example, not a quote or a performance guarantee. Do not treat time saved as cash unless it cuts overtime, frees up positions, or creates capacity to take on new business.

How can efficiency be compared: from "read speed" to "finish a correct pass"

The bar code and RFID must be compared from the same point of view to the end: for example, starting with the entry of the tray into the review area, until the identification of the goods, quantity, batch checking with the inventory mission and obtaining WMS confirmation. The bar code is counted for searching for labels, adjusting direction, re-scaning, processing anomalies and time when the results are submitted; RFID is counted for access to the channel, reading windows, regional filters, missing supplements and time confirmed by the system. RFID batch recognition is usually also followed by a collision-proof protocol group label, not every label is read out at the same moment, so it cannot be directly considered as a warehouse swallowing rate.

Clearly labeled assumptions can show whether there is room to improve. If a batch has 80 items and each barcode scan averages 2.5 seconds, data capture alone takes about 200 seconds. If an RFID zone check takes 12 seconds and two items need rescanning at five seconds each on average, that step takes about 22 seconds. The difference shows the potential savings in capture time for that batch only. It excludes handling, queueing, and upstream waits and does not mean the whole warehouse will improve by the same proportion. Report completion times for normal batches, exceptions, and peak periods, paying particular attention to slower batches. If rescanning requires breaking down a pallet, a few missed reads can wipe out most of the benefit.

The RFID acceptance and inspection look at at at least three separate indicators: the initial reading rate for labels, correct business completion rates and manual intervention ratios. First reading rate = total number of readable tabs to read in first reading window; correct performance rate = identity, number of times matching the task. Only a higher first reading rate is not enough, a series of adjacent tags, repeated events or error of direction can cause an error. The number of serial readings should also be recorded, time spent on remedial reading, misleashing and recovery after network break. Metals and liquid effects, labels are directed, stacking and channel speed are tested separately, and no fixed reading rate exists for all warehouses.

How integration landed: complete, zero and special cargo design

Full Tray Management: Reading the tray identity does not mean that the consignment is identified on a case-by-case basis.If only a RFID label is placed on the tray, the system will have a tray or identity. The complete account requires an effective “tray-carrying” link in WMS and confirms that there are no unrecorded additions or reductions after sealing. It is appropriate to stabilize the batch, to complete the flow of the consignment, to transfer the border; to dismantle the tow, to switch to the reload. If the goal is to discover that one of the trays is missing, it is not enough for the tray tags, but only for the individual or box-level identification, which is called double verification, and to identify the anomalies that can be covered by the evidence.

Dismantling the selection: Prioritizes the operator to specify which product is selected.Many SKU, small quantities, a close-in zero-swing area, bar code provides intentional item-by-case confirmation at lower cost: scan storage space, goods, batches, and then commission verification. RFID is not natural because of more than SKU, but open remote reading can easily be accessed with multiple unrelated labels, which require the design of a nearby or controlled position, box binding and quantity checking. If the error root is similar to a similar look, the system's logic of protection is more important than how it is read; if there is no controlled access to borders, keeping the bar-code bottom is often more reliable.

Special goods and mixed processes: fit by object, not by industry.Metals need to verify anti-metal labels, installation gaps and direction, liquid packaging needs to verify the marked position, full box status and different batches; cold chains also need to focus on decomposition, frost, cryogenic battery performance, glue and label clean tolerance. There are both whole-streaming and swirling warehouses where RFID can be used to keep bar code in the zero-point or interface areas, all of which is fed into the same task and inventory rules. Whether a formula should be based on an unusual cost for field samples and not be directly determined by "metallic or liquid ratio above a certain value".

Pre-procurement authentication lists: identity binding, unusual treatment and pilot acceptance

Identity model: SKU, label and vehicle cannot be mixed into one number.SKU describes the type of commodity, label coded object or label, tray coded loader; the same SKU may have multiple objects and the same tray may also contain more SKU. When bar codes are used with RFID in the same object, they should be shown to the same business object, and record the time of binding, the state of failure, changing the label and re-use rules. The tray that is recovered after you leave the library must be delinked from the old goods; repeats the bar code, if you misspelled the label and multiple tags, there should be a check mechanism, otherwise the faster you read it, the faster the error spreads.

Inventory services: One observation cannot directly trigger a single stock increase or decrease.Readers report the same label continuously, and bar codes can be scanned again. The system should relate to the task, then verify the object, number, direction and storage area, and ensure that the same business event is valid only once by using the key buttons. Reading a label that does not belong to the current task should go into a queue pending review, rather than being attributed by a single threshold of signal strength; failure to read cannot be tacitly accepted as non-existent. Support for manual confirmation, rereading, cancellation and scrutinizing, and keeping original evidence, operator and final processing results to explain how inventory changes.

System capability: To include certification issues in the demonstration and contract scope.The supplier is required to present the mixed batch in a live warehouse, untraceable repository, zero-screw library, remarking, refund and dewiring back-up, not just large screens and one smooth reading. Check whether WMS supports container detail, batch or serial numbers, state limits, interface retesting, privileges and audits; confirm terminal offline operations, printing services, label templates, equipment monitoring and subsequent maintenance costs. The bar code and RFID cannot maintain two separate inventory accounts, collect layers should share business objects and service entry, and avoid the problem of "both interfaces are correct, but the total account is different".

Pilot acceptance: Validation of true packaging, real motion lines and genuine anomalies.Select representative material, in full-filled, mixed, empty-trailing, adjacent to the channel parallel, label broken, duplicate tags and network interruptions, to compare with a manually verified baseline list. The pilot cycle covers normal day and peak operations instead of mechanically prescribing tests for weeks. The conditions should be applied simultaneously to correct accounts, misleaved, artificial interventions, time-consuming and recapacitated, and to specify how to fine-tune or narrow the range if not adopted. Set a code back process and stock reconciliation arrangements, and decide whether to extend it to other storage areas.

The final choice can be grouped into three paths: the bottlenecks, beyond the confirmation of a case by case, with limited and unusually complex budgets, complete bar-code processes; clear mass identification needs, read border control and pilot revenues, add RFID to key intersections; whole-to-choice co-exist, take together the shared WMS rules of operation. First, three questions are asked: whether the system identifies goods or loads, how the results are translated into traceability inventory services, and how they are returned in exceptional circumstances. The solution that can be verified is closer to what is actually needed in the warehouse than simply comparing equipment parameters.