How are the RFID equipment fixed asset counts performed?
It's always the problem.
Many people think that the asset count is "showing out" and just a form to tick. But in practice, it's only the first step, and more difficult to match physical and system accounts on site. A manufacturing firm has thousands of devices and tools, checked manually with lists, and it takes two or three weeks to round, and often does not find anything on the books, and then it doesn't record anything, or the model specifications are not right.
The core value of RFID counts is not "quick" but to allow each asset to have a stable, traceable electronic identity from the start of the tag, and the system automatically compares data after reading them on-site. So, the count goes from "person search" to "number finder," and the reconciliation of the account is then made into real-time verification. Here's how the RFID asset count is executed, and how the account is reconciled.
The working principles of the RFID inventory: labels, antennas and data
Understand the execution logic of RFID counts, first understand how three things fit: electronic labels; reading and writing devices (handheld or fixed-readers); and back-office systems.
TagAttach to each asset, the built-in chip and antenna. The chip contains basic information such as the asset number, name, specification, department. Depending on whether or not you need electricity, the labels are divided into source (self-carried batteries, reading distance of up to a few dozen metres), non-source (emponic waves from readers, reading distance of between 1 and 10 metres) and semi-source three. The most used in the fixed asset inventory is an passive metal tag that can be read steadily on the surface of the metal device, without being unable to read it because of the labeling.
Read-and-write devicesThe most used for this inventory is the UHF (UHF) RFID handheld terminal, which operates in a range of 860 to 960 MHz, and can read dozens or even hundreds of labels at once, whether they are stacked or hidden in the corner. Fixed-readers are more used at warehouse entry/exit points, with door closures to create automatic identification.
Backstage systemThe tag data that you receive from the reader is automatically compared to the existing account (usually Excel or ERP 's asset breakdown), and the three categories of discrepancies are exported. We have been able to contact a lot of companies in the project, which initially thought they could do an inventory if they bought a handheld, but there was no back-to-back log, which was done faster, and then had to be matched with human flesh, and only limited efficiency.
Preparation before inventory: how to label, how to handle the billing.
The preparatory work is a direct decision on the lack of success in subsequent inventory.
Asset classification and label selection
Not all assets are suitable for the same label.
- Metal casings equipment (boxes, distribution tanks, production line equipment): Select metal labels, usually between 1 and 3 mm thick, with industrial glue on the back, to withstand -40°C to 85°C working temperature.
- Small tools and instruments: flexible metal-resistant or general non-dry glue labels, small size, flexible adhesive.
- Outdoor assets (pipes, valves, outdoor cabinets): technical labels for protection levels above IP67, UV-resistant and acid-resistant.
- Assets that require frequent movement: Selecting to carry duplicate information, and non-sourced to wipe multiple labels.
The working frequency of the label is matched with that of the reader. UHF tags are far away and have a strong mass reading capability, which is a common option for fixed asset inventories; HF (HF, 13.56 MHz) labels are short-reading but more stable against metal interference, and are used to locate individual items more accurately. When mixing different frequency labels, you need to confirm whether the handheld supports multi-frequency segment reading.
Table Align with Fields
The quality of the billboard is more important than the label. It is suggested that the existing billboard be cleaned once before the inventory is taken, and the following core fields are retained: Asset number (this number corresponds to the code written in the RFID tag), asset name, specification type, location, department to which it belongs, user, date of purchase, original value, current status (used, idle, scrap).
The "location" in the billboards is connected to physical space. It's common for each room, every liner, every job place to have a location code, and then when you print it, the system not only knows which asset exists but also where it is in which room and row. When we do an inventory system for a warehouse logistics firm, they write "Store A", and once they've cleaned up the data, the difference assets are located in one corner of A -- there's no more detailed location codes, and the reason for the difference is not even able to be located.
Initialization and binding of labels
The label printing and binding proposal is completed at the same step. Prints the asset number, name, bar code or QR code information with a RFID tag printer, and the label machine synchronizes the data into the chip. Printed tags are placed in a visible position on the asset's surface, following the principle of "one device, one number" and avoiding high temperature heat (e.g. electric vent) and electromagnetic interference (e.g. near a transducer).
Once the label is completed, a hand-held scan will confirm that it can be read properly and a "physical-label-top account" triangulation will be established in the system. This step seems cumbersome, but when done, all subsequent inventory exercises will be automatically completed.
How to execute the site count: process and rhythm
After the preparation has been completed, the site inventory is not per se complex and the key is rhythm and discipline.
Determine the size and order of the count
It is recommended that the physical area be moved in batches, such as on the first floor and second floor, and in the office area and workshop. Before each batch count starts, closes the area ' s personnel to and from, so as not to cause a reading slippage by temporary moving assets. The order of the count can be pushed from the door to the inside, or from left to right by the shelf number, so that the passage will not be repeated or omitted.
Handheld Operations Point
The operator is carrying a handheld machine that follows the predefined route, and the antenna is directed towards the shelf or device, and is within range of 0.5 to 3 metres. RFID reads non-contact, without having to match the labels, but when it's close to a metal-intensive area or inside the device, it can be slowed down, the number of scans increased, and it ensures that the deep labels are read as well.
Handheld machines typically have both "volume scanning" and "scan single-ware". Batch scans are suitable for a channel inventory, such as the whole-row asset collection once you walk through the shelf corridor; single-scans are appropriate to locate an asset precisely or at the time of review of differences. Both models suggest a combination: first load-size cover all assets, then double-check items that do not match in a single-packed model.
Data feedback suggests that you upload in real time with Wi-Fi, avoiding any subsequent batch import slippage. If no Wi-Fi is present, the handheld supports local capacity to store at least 10,000 records and synchronizes immediately upon return to the office area.
Special scene processing
For assets not in the original position (to be borrowed, to be shipped for maintenance, temporarily redeployed), if a site scan finds that "the account is available but no current location" is available, do not qualify as lost, record the actual location or destination in the notes and initiate the transfer process on the system. The scrap pending also needs to be included in the inventory, with the status field marked "to be scrap", so as to avoid miscalculation of loss.
Desk reconciliation: make the data really right
When the scan is completed, the core work focuses on the data-matching chain. The quality of this step determines the credibility of the results taken as an inventory.
Identification of three categories of difference
The system automatically matches and the differences generally fall into three categories:
- The accounts are consistent:The billboards are recorded and scanned on the ground, with the same number, location and status. This is the ideal result of an inventory.
- There are no real facts on the books:The item is located on the desk, but the site scan does not read it.
- No actual accounts available:The tags are swept on site, but there is no corresponding record in the billboard.
There is also a common "inconsistent information in all accounts" such as misnamed, misspecification, change of location code. This difference does not affect the existence of assets but reflects the late maintenance of desktop accounts and requires amendment in the system.
Review and disposal of variances
When the list of discrepancies is drawn up, a review is arranged for each item.
- Identification of lost: the process of liquidation or compensation is carried out in accordance with the enterprise asset management system, while "cancelled" is marked in the desk account.
- Confirms the error of position: Updates the account location information on the desk.
- Unaccounted assets are recognized: Additional asset information is formally recorded in the accounts, marked and bound.
- Label damage unreadable: replace new labels, reprint and bind.
The whole inventory cycle recommends an " inventory report " , which includes the time of the inventory, scope, participants, total assets, number of differences, disposals, changes in total asset value, etc. Key data. The report is archived as a summary of this inventory and as a baseline data for the next inventory.
Make the count normal, not end-of-year raids.
Many companies consider RFID counts as a year-end test, and then data is in the form of a lump sum, with enormous pressure. It is recommended that the frequency of an inventory be raised from annual to quarterly or even monthly, and that single-desk count time be reduced from two weeks to one or two days. After increasing frequency, each difference becomes smaller, the cost of fixing is low, and asset data remains manageable.
If an inventory is to be a normal matter, it will also require the RFID asset data and routine business processes to be fully maintained. For example, when new equipment enters the library, you can simultaneously post the entry on the account, you can update the location information on the transfer of equipment, you can write off desk accounts on the end of the time of the equipment. So every change in the asset data is recorded, the system data are itself up to date at the time of the inventory, and there are no discrepancies.
From the executive level, RFID asset counts are not technical, but pre-planning and process discipline. The label is right, the billing is clean, the tie is set, the discrepancy review mechanism is running, the whole process is working. As a long-term team that does an asset inventory line, Shanghai-based technology has been exposed to "unmatched" situations in the actual scene of its clients, and has accumulated a system-to-deficit approach from label selection, from desk to system-to-system combo. If you're in the business of replacing traditional manual inventories with RFID, it is suggested that we start with a small pilot (e.g., a workshop or a building) and then move the process gradually, so that the risk can be controlled and the effects can be seen more easily. The asset count is not clearly numbered, but that each asset is documented and tracked.

Ms. Lei
Mr. Pang