How do you implement the equipment asset count? Large equipment and assembly inventory elements
How are equipment asset counts performed? The key is to pre-describe the range and calibre, then check them on the spot by the characteristics of the equipment, the assembly, record discrepancies and complete review, approval and desk account updates.
What do you have to prepare for the inventory of equipment assets?
First, you must clearly state the object of the inventory, the deadline, the responsible person and the field range. The equipment account usually includes asset numbers, names, models, serial numbers, place of deposit, department of use, responsible person, date of commissioning and asset status; the assembly desk account should also record specifications, quantities, package composition, subscriber and location. When a name, model or code calibre is not consistent, rules should be established to avoid double-registration of the same asset on board and on site.
Freezing a time-marked base sheet before the inventory is taken, and specifying how equipment transfers, repairs, loans, scraps and other operations are registered during the inventory. For assets that cross-shop, warehouse or construction site, pre-route routes and contacts; for stopovers, storage or loaning assets, preparation of maintenance orders, using a form or handover record as a basis for verification.
What information is to be checked at large equipment sites?
The large equipment should not be numbered only by book number. The inventory person should check the device ' s physical location, check the sign, device number or serial number and record the area, use department, responsible person and operational status. When the device ' s inscription is difficult to read, you can take a whole and a placard photograph, for reasons stated, and confirm it with material assistance such as procurement of receipt and inspection information, maintenance records, etc.
For equipment consisting of the mainframe and multiple components, the host and key ancillary parts should be checked by management caliber to avoid being fully integrated in the account, and the parts are split into parts that are not recorded. For construction in progress, unassembled, repaired or permanently disabled equipment, the physical state and supporting documentation should not be considered idle or obsolete on the basis of "not running".
What difference does it make between a load count and a large device count?
The loads are often large in number, the specifications are similar, the flow is frequent, and inventory counting is checked separately from the " same specifications " when it is called. A unit-by-unit count is numbered; if there is no single item number, a count can be counted by specification, model, number and location, and a number of units, such as pieces, kits or boxes, can be recorded in the record. The package is not kept to account for all components, but missing items cannot be recorded in the package.
When using a worksuit, the person responsible and the place of use can be identified by the receipt record; the revolving dress is checked out for loan and returned to the records; it is to be repaired, the scrap or storage suit should be individually marked with a statement of status. Shanghai-based Select Technology Ltd. will include field identification, status classification and documentation based on the same check process, reducing the repetition of confirmations due to different calibres of the records.
How are the discrepancies recorded and processed?
When the results are inconsistent with the bill, record the facts and do not change the accounts directly. Common differences include physical failure to find them, additions outside the account, discrepancies in location or responsible person, shortages of quantities, changes in status and unidentifiable numbers. Each difference at least indicates asset or build identification, booking information, field information, time of discovery, inventory count and supporting documentation.
Recovering the transfer order, receipt of maintenance order, cancellation approval or loan record by type of discrepancy at the time of review. If it is confirmed that the information on the desk account was incorrect and corrected according to the enterprise approval process; if there is an asset addition, disposal or change of responsibility, the corresponding transaction should be completed and the desk account updated. Matters that cannot be identified on the spot should be assigned to the responsible person and the completion date, records kept pending and discrepancies avoided being tracked after the inventory has been closed.
How do we check the receipt and inspection results after the count is finished?
After the inventory is completed, the field records are compared to the original desk account item by item, and the physical balance is aggregated, the information is corrected, pending verification and approval. The reviewer, other than the inventory holder, will check the priority equipment, high-value equipment and more varied work clothes; the scope and results of the sample should be kept in place. Upon completion of the clearance, the table of accounts is updated and a bottom sheet is maintained, the list of discrepancies, photographs and processing documents are maintained.
The next inventory can be adjusted to the current problem by grouping and frequency: additional access checks for frequently changed positions, priority verification status and procedures for equipment that has been disabled or is under maintenance for a long time. On-site identification, responsibility is confirmed, differences processing and desk accounts are updated into a trackable set of records, and the results are taken to facilitate subsequent verification and management.

Ms. Lei
Mr. Pang