How do RFID asset management inventories work? Processes and key control points
Industry News

How do RFID asset management inventories work? Processes and key control points

PublishedShanghai Zejie Smart Technology Co., Ltd.

The RFID asset count is roughly four steps: the front-end grant code and tag, equipment and site deployment, on-site scanning, data retrieval and reconciliation with the accounts. Key control points are concentrated in three locations: label selection, antenna layout and abnormal handling. These three blocks are solid, and the efficiency and accuracy of the inventory clearly open a gap.

What scenario is worth taking stock of RFID assets?

There are thousands of assets, spread over many floors or storage rooms, transfers and scrapes every month, and the traditional Excel-and-manual way of accounting can barely hold. The RFID's core advantage is that "non-contact, mass reading" -- dozens of assets on a shelf can be cleaned up in seconds.

The number of person days taken at a time, the rate of default, the length of the difference processing period. If the manual cost of human resources is already in two-digit days or the amount of annual discrepancy is high as a percentage of total asset value, the return on inputs from the RFID is clearer.

The RFID labels are read from the door to the shell, and are more efficient than they are removed from one piece to another.

How do asset labels work?

The label chain is the basis of the whole inventory, which is not finished and is swiped as fast as possible. There are three common control points here.

First, the label selection.Metal assets must be labeled with anti-metal, normal paper labels on the cabinet, and cannot read them on the case; plastic shell assets can be labelled with a general label at lower cost. Frequency is usually selected for UHF (860-960 MHz), reading from 1 to 8 metres, suitable for storage and machine environment.

Second, code code.EPC code for each label (identity number of tag) is tied to the asset number, and it is recommended that a map sheet be created in the system, which should be scanned before writing, avoiding weights or empty numbers. When we take an inventory of the machine room assets, we code it by "one size, one number to verify the system" and tens of thousands of labels have not been mislabelled.

Third, sticker position.Priority is given to flat surfaces, which are not easily worn; metal-resistant labels are to be solid and no bubbles are to be found; and the assets in the cabinet are recommended on back or sideboards for easy reading by handheld machines through the door of the cabinet.

What equipment is used for the site scan and where are we going?

The equipment consists of two main categories: handheld terminals and fixed-type readers. Handheld is flexible, suitable for floors and room-by-space sweep; fixed-readers are mounted at the entrance/exit or shelf end, and fit for automatic disk counts on warehouse gates or dense shelves. New projects are usually held hand in hand and fixed points are filled later.

The scan route is "scanning, not heavy" and has two common methods:

Handheld terminal power is recommended to cover a line of shelf (usually 3-5 meters) at a distance that does not need to be maximum, otherwise it will read the next area of assets. The antenna direction is roughly vertically aligned with the shelf level and is facing the asset face.

How do you get the data back? What if it doesn't match the facts?

The site was cleared and the data was returned to the asset management system in real time through WiFi or 4G; offline caches were supported in poorly populated locations and were uploaded back in bulk.

The system automatically does three things when it receives data:

  1. - To the heavy.: The same label is read only once on a number of occasions;
  2. - Yeah.: Match with system billboards, mark "in and out" in the accounts but not "not" but "in" three states;
  3. Variance reportUnsorted assets are ranked by location, responsible person and time of last appearance to facilitate on-site review.

Do not rush to lose assets. First check if they are leaky, clean and then double-cleaning the scene; second time, you do not find them, then you go through the wrong approval process.

How long does the count take?

See the value of assets and frequency of change. Price or high-flowing assets (server, medical devices, detection equipment) recommend monthly inventories; common IT terminals and office equipment are quarterly; and very few changes in fixed assets (air conditioning, cabinets, tables and chairs) are sufficient for half a year or one year.

The more conservative approach is "monthly and quarterly " . The draw drives select high-value or mobile assets, 10-20% of the total, with small but timely investment; cover all assets in full, and make a complete reconciliation. The two sets of combinations, neither waste human resources nor leave a dead end.

What pits are easily stepped upon during implementation?

Pipe One, label selection is purchased in bulk without a material test.The label on the metal case cannot be read and can only return to work.

Pipe II, code is written without verification mechanism.Tens of thousands of labels were mixed with several weight codes, and two records were recorded in the system at the time of inventory, pointing to the same asset, which was not evenly reconciled.

Pit Three, the antenna power is too high.The labels in the next room were misread, the number of assets on the books "in the books but not cleaned" increased and the review workload doubled.

Pipe Four, no location information and desk account links for RFID read.After the drive, you can only know which labels didn't come through, but I don't know which machine did.

Most of these problems can be avoided at the preparatory stage, and it's important to put on a list of assets, equipment lists and field-level maps, and to do a small-scale test with the implementers. When Shanghai-based Chettech does such projects, it usually selects a floor or a storeroom to pilot, run through the process and then go to the whole site, and then press back to work.

In summary, the core of RFID asset counts is "tacking right, equipment right and differences processed in a timely manner." These three steps are done, from a time-consuming and laborious exercise to a routine that stabilizes the real state of assets.