How is the management of spare parts for equipment implemented? Key links and control points are analysed
RFID Knowledge

How is the management of spare parts for equipment implemented? Key links and control points are analysed

PublishedShanghai Zejie Smart Technology Co., Ltd.

Equipment spare parts management is to be moved from “parts found after equipment failure” to pre-configuration by criticality, consumption patterns and supply cycle.

Element 1: Classification by equipment impact and spare parts properties

When establishing the spare parts list, at least the name of the spare parts, the specifications type, the equipment to be installed, the location of the installation, the unit of measure, the supply period, the source of the purchase and the stock status. The classification cannot be based on price alone: it also depends on whether the missing items are closed down, whether they affect security, and whether they can be procured or replaced quickly.

The classification results guide inventory decisions, not just the addition of table fields. When Shanghai Picket Technologies handles these processes, Shanghai will check the importance of equipment, the effects of failure and the procurement cycle in the same list, and avoid only taking a voucher price to decide whether or not to deliver the goods.

Element 2: Inventory measured with historical lead and procurement cycle

Demand measurement allows for the first taking of the last 12 months' access records, which are used monthly; when insufficient, combine the number of equipment, and maintain plan and maintenance staff experience to indicate the basis for the estimation and amend it in subsequent inventory. For spare parts with high fluctuations, it is not appropriate to use the annual average directly as a replenishment criterion.

A basic rule is reorder point = expected demand during the procurement lead time + safety stock. For example, if a spare averages two issues per month, lead time is about one month, and safety stock is one unit, review replenishment when stock falls to three. This illustrates the calculation only. Use your own issue rates, lead times, and downtime risk.

Safe stocks are buffers against fluctuations in demand or delivery. The supply is unstable, and spare parts with a high impact of missing items can be appropriately increased; where there are clear alternatives or fast-to-reach spare parts, they can be reduced in conjunction with actual stock reductions.

Point 3: Establish a continuous control point for procurement requests, acceptances and inventories

When the stock reaches the point of replenishment, the equipment or storage liability checks the existing amount and submits a request for purchase in transit and pending. The request should be made by writing the spare parts code, specifications, quantities, date of demand and applicable equipment, avoiding proximity of name, and the lack of conformity with model type leads to an incorrect purchase.

The arrival of the goods will be checked against the procurement information type, quantity, appearance and accompanying information; if the size or technical parameters need to be verified, they should be confirmed in accordance with the requirements for enterprise inspection and then entered into the bank.

Point 4: Equipment and maintenance tasks are linked to each acquisition

The access record contains at least a spare parts code, quantity, recipient, date of receipt, corresponding equipment and maintenance tasks. Once the repairs are completed, old replacements are repaired, pending validation or write-off; the repossessable is tested before deciding whether to re-enter the bank and cannot be used as a direct inventory.

The inventory is then kept to reflect the real amount of available, and then the subsequent distinction between normal consumption, maintenance return and end-of-life losses. For critical spare parts, additional storage locations and batch records can be recorded, and the time for searching and checking should the failure occur is reduced.

Element 5: A fixed rhythm count and adjust the rules

The frequency of the inventory may be arranged according to the risk schedule for spare parts: monthly reconciliation of critical spare parts, and a quarterly or enterprise-established cycle of drawbacks for general spare parts; first checking access to the warehouse records, maintenance receipt and condition of check-ups, and then adjusting the desk accounts in accordance with the authority.

Each review focuses on three types of signals: whether there are excess stocks that have not been received for long periods, whether the spare parts that are frequently missing require adjustments to replacement points, whether model changes or whether equipment is still being procured after decommissioning. The differences in inventory count, the number of missing items and the stockings are included in the same monthly or quarterly list, which allows parameters to be adjusted.

You can start with a piece of equipment to run the test, complete the spare parts files, verify whether the replacements, receive and accept, access and inventory records are complete; and stabilize the operation before expanding the scope. Put classification rules, inventory parameters and those responsible into the routine process, and change the management of spare parts from temporary search to sustainable maintenance mechanisms.