How to implement full-life cycle management of spare parts? Phase control points
RFID Knowledge

How to implement full-life cycle management of spare parts? Phase control points

PublishedShanghai Zejie Smart Technology Co., Ltd.

The key to implementation is not simply to press the inventory, but to provide for a clear purpose, responsible person, status and exit condition for each spare part.

Reassembly needs recognition: first judge why.

Management failures often begin when the accounts are established: items are named in close proximity and are coded over time, or ordinary consumables are considered to be a key spare parts long-term reserve. The file should relate to the unit bits, material specifications, applicable machine types, installation locations, replacement relationships, procurement cycles and usage records; for spare parts that have not been historically consumed, indicate the basis of judgement, and avoid using estimates as facts.

The security inventory is a reserve for needs fluctuations or delays in replenishment, which cannot be set on an empirical basis only.

Retrofitted procurement acceptance: technical conditions written before purchase orders

The spare parts purchase is prone to "same model, not actually applicable." The specifications in the drawing or equipment information, materials, dimensions, interfaces and performance requirements should be checked before the procurement, and whether the replacement was technically cleared. The quantities written in the order, the delivery period, the quality documentation and packaging requirements can be reduced to the amount of mismatches that are detected after the goods have been delivered.

Checking names, specifications, quantities and appearances; recording information on batches, serial numbers or materials required for retention periods; and parts requiring technical verification, following established inspection procedures. The acceptance results should be linked to purchase orders and inventory records, and the unqualified material should be isolated and marked in order to avoid being sent to the scene by mistake.

Recycled storage and access: inventory records are relevant to the physical

The basis for inventory management is “one thing, one account can be verified”. Storage space, quantity, batch, state and validity period should be updated in a timely manner; materials such as seals, lubricant material that are sensitive to temperature humidity or retention periods shall be stored under the conditions specified by the manufacturing information and with an end-of-life check. When first available, care must also be taken about the duration of the material's life, which cannot be issued only on time-to-time mechanical basis.

The access record is at least associated with the time, quantity, equipment, worksheets and licensees. If the parts removed are repaired after maintenance, they should be marked as pending inspection or repair, and not directly included in the available inventory. When Shanghai-based Cheeky Waytech, when combing such management processes, will match the stock status and maintenance order, focusing on the difference between " system displays availability, actual non-availability on site " .

Reassembly maintenance and end-of-life: clear movement of spare parts

The repairables should record the cause of removal, the results of the inspection, the maintenance content, the outcome of the review and the date of re-entry. The parts that are not approved cannot be restored to their usable inventory; the cost of repair, the cycle and the repetition of failure should also be kept to determine whether to continue with maintenance or replace. For key components, periodic inspections may be arranged in conjunction with the equipment maintenance plan to reduce the risk of a stock being placed for long periods before it is found to be disabled.

The end-of-life decision should first identify the need for security and additional channels to avoid a real gap after the clean-up of the book.

Rewinding indicators and improvements: monthly abnormality, quarterly calibration strategy

Indicators can be used for the accuracy of inventory, number of missing goods, amount of inactive stock, frequency of emergency purchases, spare parts maintenance cycle and cause of write-off. Indicators should serve specific decision-making:

The rules can be adjusted to actual differences after a selection of one key equipment or group of high-value spare parts is made, coded, graded, accepted, received and accepted, and then used. The responsibilities for each stage are clearly established, the recording and review cycle is clear, so that the spare parts management of the items is moved from "stocked" to "available when needed, identifiable when expired, and supported when exited."